O presente trabalho trata do planejamento da movimentação de contêineres vazios ao longo de um conjunto de portos, buscando o balanceamento entre as demandas e ofertas dos mesmos em todos os portos ao menor custo, e considerando as restrições de capacidade de transporte dos modais envolvidos. Para isso será adotado um modelo de fluxo em rede multi-produto para representar o sistema de movimentação de contêineres vazios e que servirá de base para o desenvolvimento de uma formulação matemática, a qual, implementada através de uma ferramenta computacional de otimização, determina os fluxos de vazios no sistema. A verificação do modelo proposto deu-se através de testes em problemas reduzidos de movimentação de vazios, assim como em um problema cujos resultados foram publicados na literatura. Os resultados sugeriram a adequabilidade e confiabilidade do modelo proposto que pode, então, ser aplicado a um problema real da empresa de navegação Hamburg Süd, tendo seus resultados comparados aos resultados fornecidos pela mesma. / This dissertation deals with the empty containers movement planning throughout a set of ports, aiming the balancing between the demands and supplies in all the ports at minimal cost, and considering the capacity constraints of the transport modes considered. A multi-commodity network flow model will be adopted to represent the empty containers movement system. This model supports the development of a mathematical formulation which, through a computational optimization tool, determines the flows of empty containers throughout the system. The verification of the proposed model was given through tests in reduced problems, as well as in a problem which results had already been published in literature. The results had suggested the adequateness and trustworthiness of the proposed model, which could, then, be applied to a real problem of the navigation company Hamburg Süd, and the results could be compared with the ones given by the company.

O presente trabalho trata do planejamento da movimentação de contêineres vazios ao longo de um conjunto de portos, buscando o balanceamento entre as demandas e ofertas dos mesmos em todos os portos ao menor custo, e considerando as restrições de capacidade de transporte dos modais envolvidos. Para isso será adotado um modelo de fluxo em rede multi-produto para representar o sistema de movimentação de contêineres vazios e que servirá de base para o desenvolvimento de uma formulação matemática, a qual, implementada através de uma ferramenta computacional de otimização, determina os fluxos de vazios no sistema. A verificação do modelo proposto deu-se através de testes em problemas reduzidos de movimentação de vazios, assim como em um problema cujos resultados foram publicados na literatura. Os resultados sugeriram a adequabilidade e confiabilidade do modelo proposto que pode, então, ser aplicado a um problema real da empresa de navegação Hamburg Süd, tendo seus resultados comparados aos resultados fornecidos pela mesma. / This dissertation deals with the empty containers movement planning throughout a set of ports, aiming the balancing between the demands and supplies in all the ports at minimal cost, and considering the capacity constraints of the transport modes considered. A multi-commodity network flow model will be adopted to represent the empty containers movement system. This model supports the development of a mathematical formulation which, through a computational optimization tool, determines the flows of empty containers throughout the system. The verification of the proposed model was given through tests in reduced problems, as well as in a problem which results had already been published in literature. The results had suggested the adequateness and trustworthiness of the proposed model, which could, then, be applied to a real problem of the navigation company Hamburg Süd, and the results could be compared with the ones given by the company.

The focus of this thesis is to find, visualize and analyze the optimal flow of autonomous electric vehicles with charge constraints in urban traffic with respect to energy consumption. The traffic has been formulated as a static multi-commodity network flow problem, for which two different models have been implemented to handle the charge constraints. The first model uses a recursive algorithm to find the optimal solution fulfilling the charge constraints, while the second model discretizes the commodities’ battery to predetermined battery levels. An implementation of both methods is provided through simulations on scenarios of three different sizes. The results show that both methods are capable of representing the traffic flow with charge constraints, with limitations given by the size of the problem. In particular, the recursive model has the advantage of considering the charge as a continuous quantity. On the other hand the discretization of battery levels allows to handle charge constraint setups with higher complexity, that is when longer detours are needed to fulfill the charge constraints.

The purpose of this paper is to increase the routing efficiency of two previously separate commodity transports. By combining them in a common, multi-commodity network flow (MCNF). A Mixed Integer Linear Programming (MILP) model is used to minimize the mileage that is needed to fulfill demand in the different destinations of the transport network. Input needed for the model was mileage between destinations, which was obtained from open data. And the demand of respective commodity was received from documents and an estimation. To solve the stated problem approximations and simplifications was needed because it showed a NP-complete problem. The aim is to produce a result that shows a lower mileage than a reference measure from the present situation with separate transports. The result showed an optimized solution of 1939 km. Which was a difference of 1941 km from the reference measures, that summarized to 3880 km. Despite this the result from the model shows an effective optimization. Which makes the use of MILP for minimizing mileage inside a MCNF problem, a useful approach for solving the stated problem. / Syftet med arbetet var att effektivisera körsträckor för två tidigare separata transporter av olika produkter. Genom att kombinera dem till en gemensam transport i ett multi-commodity network flow (MCNF). Med en Mixed Integer Linear Programming (MILP) modell minimeras de körsträckor som krävs för att fylla efterfrågan i transportnätverkets adresser. In-data som krävdes för att en modell skulle kunna utföras var körsträckor mellan olika adresser, vilket hämtades från öppen data. Samt efterfrågan på produkter som erhölls från dokument och estimering.  Då problemet som skulle lösas visade på hög beräkningskomplexitet behövde ett antal approximationer och förenklingar verkställas. Målet var att visa på ett resultat där körsträckor hade förminskats relativt till ett referensmått från nuläget. Där resultatet visade på en optimerad lösning på 1939 km. Vilket var en differens på 1941 km från de referensmåttet som summerades till 3880 km. Modellens resultat visar trots det en effektiv optimering. Vilket gör att användningen av MILP för att minimera körsträckor inom MCNF problem, är ett effektivt tillvägagångssätt att lösa det motiverade problemet.