In this paper, an idea of using space-time block coding (STBC) in multi-user cooperative diversity has been exploited to improve the performance of the transmission in wireless local area networks. The theoretical and simulation results show that, using STBC approaches can always achieve the better performance than existing techniques without introducing the space-time coding. By analyzing the throughput and frame error ratio (FER) of the two different STBC cooperative schemes, we find the trade-off between throughput and reliability. The location of the relay is crucial to the performance, which supposes a rule for future crosslayer design.

In the past two decades, wireless communication systems have grown with an unprecedented speed from radio paging and cellular telephony to multimedia platforms offering voice and video streaming . One undesired outcome of this expansion is a heavy utilization of the available frequency spectrum. Particular pressure comes from new multimedia applications, which require larger operational bandwidth for their implementations. Conventional coding, modulation and multiplexing techniques are unable to overcome the problem associated with the limited frequency spectrum, and therefore modern wireless systems are improved through the utilization of the space/angle domain. In order to improve capacity and reliability with the space/angular domain, wireless systems require the use of multiple element antennas (MEA) accompanied by appropriate signal processing algorithms. Typically multiple antennas are used to steer the beams of the line of sight (LOS) signal toward desired users and nulls in the direction of undesired users. However, in the case of indoor environments, the presence of reflections, scattering and refraction caused by the environment, it is better to make use of non-line of sight (NLOS) signal propagation. As these types of MEA antenna systems are a relatively new concept in wireless communications, their potential needs be tested experimentally in real world conditions. To achieve this goal, prototype systems capable to implement various modulation, coding and transmission schemes for MEA are required. This thesis investigates the benefits of MEA systems by building and testing such systems in indoor environments. The project area spans across many disciplines including wireless communications, antennas, embedded systems and RF hardware design, and therefore the thesis begins with essential background information. This concerns some fundamental concepts of a wireless communication channel and its information capacity. These are accompanied by ample considerations of signal propagation and adverse effects of reflection, scattering and diffraction. Also included are the signal modulation and coding. Following this background information, the main topic concerning diversity and multiple-input multiple output system that involves the use of multiple element antennas is introduced. This background material sets the reasons for investigating of two types wireless communication systems that include multiple element antennas: antenna diversity and MIMO. Following the literature review, the thesis reports on investigations that realize the thesis aims. The first part of the undertaken investigations concerns an indoor 2×2 MEA diversity system in which MEAs accompany conventional transceivers. In the experiments, Bluetooth transceivers aimed for a short range operation at 2.45 GHz are used, which are both connected to a 2-element antenna array. The connection is made via a switched beamforming network which involves 4-port hybrid circuits. Two ports of these hybrids are used for connecting antennas, while the one of the remaining two is connected to the Tx or Rx transceiver. By switching between these two input ports of the hybrid, two different radiation patterns can be formed, at both Tx and Rx. One Bluetooth transceiver is stationary while the other is made mobile by employing a purpose built mechanical sub-system covering the precise movement within a circle of 3 m. Both the movement and collection of the data as well as the display of the obtained results are accomplished with the in-house developed software run on a micro-controller and computer. Experimentally, it is shown that the proper Tx and Rx mode for a given position, improves the received signal strength. This leads to improved signal to noise ratio (SNR) and thus the quality of signal transmission. The implementation of this concept only requires a signal quality indicator, and simple feedback between the receiver and the transmitter. In the selected transceivers, "RSSI" was the quality indicator used, and is present in many modern wireless transceivers. Also, any signal quality indicator can be used. Although the experiments were performed with respect to the transmit/receive pattern diversity, they can also be easily extended to other forms of antenna diversity such as polarization or field diversity. The undertaken investigations are original in terms of the full proof of benefits of pattern diversity for indoor wireless systems. The second part of the undertaken investigations focuses on the design, development and testing of a full indoor multiple element antenna system. This demonstrator system includes two main modules: the baseband processor (based on a field programmable gate array) and the RF front end. The FPGA signal processing module is designed around the Altera Stratix II S260 chip, which is commercially available. Suitable hardware design is required to accomplish MIMO signal transmission. The RF front end module performing direct conversion between baseband and 2.45 GHz or 5 GHz radio frequency bands uses the commercially available MAX2829 chip. The interface between FPGA and RF front end is a set of analogue to digital (ADC) and digital to analogue (DAC) converters that operate on signals between the FPGA and the RF transmitter/receiver modules. They are capable of handling 12/14 bit signals at up to 125 MSmp/sec. The data rate chosen in these investigations is 3.125 Mbps. In addition to the MAX2829 IC chip, amplifiers, switches and antennas are included in the RF module. The development of this wireless communication system has been accomplished through a number of design, development and testing stages. Most of the research effort concerned FPGA based signal processing because this part of the system is where the information processing takes place. For the MIMO system, the transmitted signal has to be modulated and coded, with efficient utilization of the multiple element antennas in both these processes. The prerequisite to signal demodulation is signal synchronization. In turn, the decoding requires the knowledge of characteristics of the channels that are formed between transmitting and receiving antennas. For an efficient FPGA hardware design, all the numerical operations must occur in fixed point arithmetic. To accomplish all of these functions, suitable baseband signal processing algorithms were developed as part of the thesis work. First, they were written in MATLAB and then transferred to C++ which is closer to the FPGA implementation. Having confirmed their validity, they were hardware deployed. In the investigated MIMO demonstrator, QPSK modulation and the Alamouti coding scheme were selected for modulating and coding of the transmitted signal. The implementation of the hardware baseband module was validated using a purpose developed channel emulator. This emulator was capable of implementing the channel properties from actual measurements and from theoretical models. The applied theoretical models concern the single and double bounce scattering models, as well as a full EM model and include full EM interactions within array antennas formed by wire dipoles. These models produce random characteristics of the complex channel matrix which describes the channel properties for narrow or wideband case. With this channel emulator, investigations were performed with respect to channel estimation. The training and semi-blind channel estimation methods were tested using the developed emulator. To schedule signal transmission as well as to obtain suitable insight into individual processes, two extra modules were developed as part of the thesis project. These are the scheduler and visualisation modules. The scheduling hardware controls data packets for at the transmitter, and oversees the packets being decoded at the receiver module. For the visualization module, specialized hardware buffers and analysis modules are created for data storage. The signals resulting from the encoding and decoding processes are stored in these buffers, synchronized to each other, which allows for synchronous visualization of the signals. The data from these buffers is streamed to a PC via a 100 Mbit Ethernet connection and a soft-core processor (running uClinux) in the baseband board. Using a web browser on the PC, a graphical interface using scalable vector graphics (SVG) is used for interaction with the embedded web server to display and control what the hardware is sending and receiving. Due to latency, only a quasi-real time display on PC is possible, as 10 ms of time domain data takes 60 ms to display. The FPGA hardware performs real-time continuous data transmission and decoding, and the latency is only in the visualization system. Using the developed baseband system it was shown that the proposed semi-blind channel estimation was advantageous over the classical training approach when the channel properties change during packets transmissions. The developed channel emulator, semi-blind channel estimation algorithm and the visualisation software are the original contributions of this thesis. Having established the proper functioning of the FPGA baseband processor, the remaining investigations concerned the development of the RF transceiver module. This task was accomplished using guidelines offered by the MAX chip manufacturer. The challenge concerned its manufacturing in 4-layer board format. This part of the project required the outsourcing of the PCB manufacturing and component assembly to obtain successful production of the RF front-end board. The RF tests undertaken as part of the project verified the operation of this RF hardware. With the successful development of individual baseband and RF modules, the last part of project concerned the integration of them. Because most of the benefits of the 2×2 MIMO system were demonstrated via the use of a channel emulator, this part of the thesis consisted of the results of a number of experiments. Considerable effort was spent for the full integration of the RF and baseband modules to make them ready for real-time operation. Some of the undertaken tasks were new, as they were not required for experiments using only the baseband system and channel emulator. One of the new challenges concerned proper symbol synchronization. Two novel algorithms were proposed and verified. One of these were based on a simple comparison between "I" and "Q" components of the received signal and the other one involving a correlation of the signal to a known training sequence. The last experiment involved the experimental measurements of signals transmitted over air using the testbed. As the number of interfaces was limited only one transmitting and one receiving antenna was connected to the 2×2 baseband system. However, the Alamouti scheme is able to function when only one of the two antenna is connected, and therefore real-time performance in an indoor environment was successfully tested. The presented designs, algorithms and visualisation form a strong platform for other researchers to continue and expand the work done in this project.

no / This study presents an investigation of the mutual coupling between two printed elements antenna for a multiple-input-multiple-output (MIMO) antenna performance. It consists of two crescent shaped radiators placed symmetrically, and a neutralization line is applied to improve the mutual coupling. Theoretical and experimental characteristics are presented and compared. The antenna yields an achieved impedance bandwidth of 18.67 % (over 2.04–2.46 GHz) with a reflection coefficient <−10 dB and mutual coupling minimization of <−20 dB in addition to a reasonable and stable radiation pattern and envelope correlation.

Yes / In this work, miniaturized tunable two-antenna MIMO systems composed of printed F-slot shaped is developed to operate in the GPS, PCS, DCS and UMTS bands. The two-element MIMO antenna occupies a volume of 50 × 37.5 ×1.6 mm3, and is printed on an FR4 substrate. Initially, the frequency tunability of the MIMO antennas was verified by lumped capacitors with values between 0.75 to 2.75 pF to achieve a tuning range from 1.55 to 2.07GHz while the low mutual coupling between the radiators was accomplished by adding an I-shaped branch to a cut-away ground plane. The two antennas are then loaded with varactors to simultaneously achieve miniaturization and tunability. Simulation and measurement results demonstrate the successful implementation of a tunable MIMO with coupling reduction mechanism for a portable handheld wireless transceiver. The channel capacity of the proposed antenna is investigated and found to be close to that of an un-correlated system with efficient diversity in which the mutual coupling across the full bandwidth was better than -13dB. Owing to the compact size and ease of manufacture, the proposed antennas can be a promising solution for adaptive MIMO systems in handheld devices. / This work has been performed in the framework of ARTEMOS project under work programme ENIAC JU 2010 and FCT (Fundação para a Ciência e Tecnologia) .The authors would like to thank Datong PLC (Leeds LS18 4EG, West Yorkshire, U.K.), for their financial support of the Knowledge Transfer Partnership (KTP No: 008734).

ITC/USA 2006 Conference Proceedings / The Forty-Second Annual International Telemetering Conference and Technical Exhibition / October 23-26, 2006 / Town and Country Resort & Convention Center, San Diego, California / This paper addresses the air-to-ground communication problem, where multiple transmit antennas are used on the aircraft to combat multi-path interference. The channel is assumed to have a line-of-sight component and a single ground reflection. Multiple input multiple output (MIMO) techniques can be used in this situation, to increase the reliability and data rate. In this paper we discuss how the MIMO channel capacity changes, with the aircraft antenna configuration, altitude, velocity, range, and a number of other parameters. For comparison, the MIMO results are compared to systems which have single antennas at the transmitter, at the receiver, or at both ends.

ITC/USA 2009 Conference Proceedings / The Forty-Fifth Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2009 / Riviera Hotel & Convention Center, Las Vegas, Nevada / Space-time Coding (STC) for Multiple-Input Multiple-Output (MIMO) wireless communication systems is an effective technique for providing robust wireless link performance in telemetry systems. This paper investigates the degradation in system performance when synchronization errors between the transmitter and receiver are present. Specifically, expressions that quantify the increase in symbol-error-rate as a function of symbol synchronization error are derived for a two-transmit and single receive antenna MISO system using binary frequency shift keying waveforms. These results are then extended to the MIMO case. The analytic results are verified with simulation results that show close agreement between the theoretical expressions and Monte Carlo simulation runs.

ITC/USA 2010 Conference Proceedings / The Forty-Sixth Annual International Telemetering Conference and Technical Exhibition / October 25-28, 2010 / Town and Country Resort & Convention Center, San Diego, California / Multiple-Input Multiple-Output (MIMO) systems have at least two transmitting antennas, each generating unique signals. However some applications may require three, four, or more transmitting devices to achieve the desired system performance. This paper describes the design of a scalable MIMO transmitter, based on field programmable gate array (FPGA) technology. Each module contains a FPGA, and associated digital-to-analog converters, I/Q modulators, and RF amplifiers needed to power one of the MIMO transmitters. The system was designed to handle up to a 10 Mbps data rate, and transmit signals in the unlicensed 2.4 GHz ISM band.

ITC/USA 2008 Conference Proceedings / The Forty-Fourth Annual International Telemetering Conference and Technical Exhibition / October 27-30, 2008 / Town and Country Resort & Convention Center, San Diego, California / This paper describes the use of orthogonal space-time block codes to overcome the performance and complexity difficulties associated with the use of Shaped Offset QPSK (SOQPSK) modulation, a ternary continuous phase modulation (CPM), in multiple-input multiple-output telemetry systems. The orthogonal space-time block code is applied to SOQPSK waveforms in the same way it would be applied to symbols. The procedure allows the receiver to orthogonalize the link. The main benefits of this orthogonalization are the easy realization of the transmit diversity for the offset-featured SQOSPK, and the removal of the noise correlation at the input to the space-time decoder and the elimination of I/Q interference when space time orthogonalization is applied to the symbol level.

ITC/USA 2008 Conference Proceedings / The Forty-Fourth Annual International Telemetering Conference and Technical Exhibition / October 27-30, 2008 / Town and Country Resort & Convention Center, San Diego, California / Adaptive modulation is a communication technique capable of maximizing throughput while guaranteeing a fixed symbol error rate (SER). However, this technique requires instantaneous channel state information at the transmitter. This can be obtained by predicting channel states at the receiver and feeding them back to the transmitter. Existing algorithms used to predict single-input single-output (SISO) channels with recurrent neural networks (RNN) are extended to multiple-input multiple-output (MIMO) channels for use with adaptive modulation and their performance is demonstrated in several examples.

ITC/USA 2007 Conference Proceedings / The Forty-Third Annual International Telemetering Conference and Technical Exhibition / October 22-25, 2007 / Riviera Hotel & Convention Center, Las Vegas, Nevada / The accuracy of channel estimation plays a crucial role in the demodulation of data symbols sent across an unknown wireless medium. In this work a new analytical expression for the channel estimation error of a multiple input multiple output (MIMO) system is obtained when the wireless medium is continuously changing in the temporal domain. Numerical examples are provided to illustrate our findings.