Spelling suggestions: "subject:"nafion membrane"" "subject:"rafion membrane""
1 |
Investigating the factors for the low cycle life of sodium oxygen batteriesBi, Xuanxuan 15 May 2015 (has links)
No description available.
|
2 |
An intracellular glucose biosensor based on nanoflake ZnOFulati, Alimujiang, Usman Ali, Syed M., Asif, Muhammad H., Hassan Alvi, Naveed Ul, Willander, Magnus, Brännmark, Cecilia, Strålfors, Peter, Börjesson, Sara I., Elinder, Fredrik, Danielsson, Bengt January 2010 (has links)
In this study, an improved potentiometric intracellular glucose biosensor was fabricated with immobilization of glucose oxidase on a ZnO nanoporous material. The ZnO nanoporous material with a wall thickness around 200 nm was grown on the tip of a borosilicate glass capillary and used as a selective intracellular glucose sensor for the measurement of glucose concentrations in human adipocytes and frog oocytes. The results showed a fast response within 4 s and a linear glucosedependent electrochemical response over a wide range of glucose concentration (500 nM-10 mM). The measurements of intracellular glucose concentrations with our biosensor were consistent with the values of intracellular glucose concentrations reported in the literature. The sensor also demonstrated its capability by detecting an increase in the intracellular glucose concentration induced by insulin. We found that the ZnO nanoporous material provides sensitivity as high as 1.8 times higher than that obtained using ZnO nanorods under the same conditions. Moreover, the fabrication method in our experiment is simple and the excellent performance of the developed nanosensor in sensitivity, stability, selectivity, reproducibility and anti-interference was achieved. All these advantageous features of this intracellular glucose biosensor based on functionalised ZnO nanoporous material compared to ZnO nanorods demonstrate a promising way of enhancing glucose biosensor performance to measure reliable intracellular glucose concentrations within single living cells. / <p>Original Publication:Alimujiang Fulati, Syed M. Usman Ali, Muhammad H. Asif, Naveed Ul Hassan Alvi, Magnus Willander, Cecilia Brännmark, Peter Strålfors, Sara I. Börjesson and Fredrik Elinder, An intracellular glucose biosensor based on nanoflake ZnO, 2010, Sensors and actuators. B, Chemical, (150), 2, 673-680.http://dx.doi.org/10.1016/j.snb.2010.08.021Copyright: Elsevier Science B.V., Amsterdam.http://www.elsevier.com/</p>
|
3 |
Thermodynamics of sorption and distribution of water in nafionElfring, Gwynn Johan 06 April 2010 (has links)
In this work a model for the wetting and swelling of pores with water within a Nafion membrane is developed. This model is based on minimizing all contributions to the total free energy of the proposed system. We find that equilibrium state depends on entropic mixing forces and energetic surface forces. The wetting of the pore relies on the entropic forces exceeding the energetic forces. Specifically this indicates a critical pore size in which liquid is the favorable state. If the pore fills with liquid it will swell until balanced by the energy of the deforming membrane. Several factors including pressure relative to saturation and the phase which hounds the membrane are shown to dramatically affect the final equilibrium state of the system.
|
4 |
Interfacing spectrophotometry to process liquors applications to kraft pulpingYang, Xiaotian January 2002 (has links)
This thesis summarizes the outcome of work performed withthe objective to contribute to the knowledge and development ofthe kraft cooking process using spectrophotometricinterfaces. In kraft cooking, it is desirable to maximize the removal oflignin in the cook without loss of pulp strength. Theselectivity can be improved by exchanging some of the hydrogensulfide ion in the white liquor for polysulfides. Paper Ipresents a spectrophotometric method for in-line monitoring ofthe electrochemical production of polysulfide using anATR-probe for the UV-Vis range. A linear relation existsbetween the ATR-probe response and the concentration ofabsorbing species. Thus the process can be followed by simplemonitoring of a few wavelengths. A spectrophotometric monitoring system using a durableNafion ionomer membrane interface for continuous on-linemeasurement of sulfide and dissolved lignin during kraftcooking has previously been developed by our group. In paperII, the permeation of low molecular weight anions from liquorshaving high ionic strengths through a membrane in Na+ form hasbeen studied. A general relation between penetration and ionsize approximated by molecular weight has been established. Thepenetration of different anions can be explained as a diffusionthrough the winding membrane channels. Further the differentanions transport independently without being interfered by thesample matrix. In light of this validation, we applied the membraneinterface to the determination of anthraquinone-2-sulfonate(AQ-S) in alkaline pulping liquor. In paper III, a simple andrapid spectrophotometric method was developed and implementedon real samples. Interferences from other compounds penetratingthe membrane were minimized by reduction of the penetrated AQ-Sand measurement at 520 nm. This method is quick and can be usedon-line. Further, we extended the method to determination ofanthraquinone (AQ) in pulping liquor (paper IV). Although AQ isregarded as insoluble, it was found that the apparentsolubility of AQ in alkaline solutions increases considerablyin the presence of lignin, reaching 0.14 g/L at 90 oC. Thismakes the calibration of AQ possible. Time-resolvedmeasurements of dissolved AQ in 3 kraft-AQ pulping processeswere performed. The results show that the membrane has great potential aspart of a selective interface in applications where theconcentrations of small anions are to be monitored in mediawith high ionic strength. Keywords: Kraft cooking, On-line, Sulfide, Lignin,Polysulfide excess sulfur, Anthraquinone-2-Sulfonate (AQ-S),Anthraquinone (AQ), Nafion Membrane, UV-Vis, ATR-probe,Spectrophotometric.
|
5 |
Interfacing spectrophotometry to process liquors applications to kraft pulpingYang, Xiaotian January 2002 (has links)
<p>This thesis summarizes the outcome of work performed withthe objective to contribute to the knowledge and development ofthe kraft cooking process using spectrophotometricinterfaces.</p><p>In kraft cooking, it is desirable to maximize the removal oflignin in the cook without loss of pulp strength. Theselectivity can be improved by exchanging some of the hydrogensulfide ion in the white liquor for polysulfides. Paper Ipresents a spectrophotometric method for in-line monitoring ofthe electrochemical production of polysulfide using anATR-probe for the UV-Vis range. A linear relation existsbetween the ATR-probe response and the concentration ofabsorbing species. Thus the process can be followed by simplemonitoring of a few wavelengths.</p><p>A spectrophotometric monitoring system using a durableNafion ionomer membrane interface for continuous on-linemeasurement of sulfide and dissolved lignin during kraftcooking has previously been developed by our group. In paperII, the permeation of low molecular weight anions from liquorshaving high ionic strengths through a membrane in Na+ form hasbeen studied. A general relation between penetration and ionsize approximated by molecular weight has been established. Thepenetration of different anions can be explained as a diffusionthrough the winding membrane channels. Further the differentanions transport independently without being interfered by thesample matrix.</p><p>In light of this validation, we applied the membraneinterface to the determination of anthraquinone-2-sulfonate(AQ-S) in alkaline pulping liquor. In paper III, a simple andrapid spectrophotometric method was developed and implementedon real samples. Interferences from other compounds penetratingthe membrane were minimized by reduction of the penetrated AQ-Sand measurement at 520 nm. This method is quick and can be usedon-line. Further, we extended the method to determination ofanthraquinone (AQ) in pulping liquor (paper IV). Although AQ isregarded as insoluble, it was found that the apparentsolubility of AQ in alkaline solutions increases considerablyin the presence of lignin, reaching 0.14 g/L at 90 oC. Thismakes the calibration of AQ possible. Time-resolvedmeasurements of dissolved AQ in 3 kraft-AQ pulping processeswere performed.</p><p>The results show that the membrane has great potential aspart of a selective interface in applications where theconcentrations of small anions are to be monitored in mediawith high ionic strength.</p><p>Keywords: Kraft cooking, On-line, Sulfide, Lignin,Polysulfide excess sulfur, Anthraquinone-2-Sulfonate (AQ-S),Anthraquinone (AQ), Nafion Membrane, UV-Vis, ATR-probe,Spectrophotometric.</p>
|
6 |
Gestion de l'eau et performances électriques d'une pile à combustible : des pores de la membrane à la cellule / Water management and electrical performances of a PEM fuel cell : from the pore of the membrane to the cellColinart, Thibaut 29 September 2008 (has links)
Cette thèse apporte des éléments sur la compréhension de la gestion de l'eau et de ses effets sur les performances électriques d'une PEMFC au moyen de modélisations multi-échelle des transferts. Une analyse du transport couplé de charges et de matière dans les pores de la membrane est proposée. La présence d'eau liquide est prise en compte dans les GDL (écoulements diphasiques) et les couches actives (noyage). Le couplage de ces modèles à une description des transferts de matière le long des canaux d’alimentation permet de mettre en évidence une répartition non-uniforme des concentrations en eau, des flux et donc de la densité de courant. Les résultats numériques sont comparés à des données expérimentales (coefficient de partage de l'eau et performance électrique locale) obtenues au laboratoire sur deux piles. Ceci permet de valider les modèles de fonctionnement du cœur de pile et d'alimenter la réflexion sur la connaissance et la modélisation des transferts d'eau dans le cœur de pile / This works contributes to the understanding of water management of polymer electrolyte membrane fuel cell and of its links with the electrical performances. More specifically, the manuscript deals with the multi-scale modelling of transport phenomena. An analysis of coupled mass and charge transfer in the pores of a polymer membrane is presented. The presence of liquid water is considered in the GDL (two-phase flow) and in the active layers (flooding). The description of these phenomena is associated with that of gas depletion along the bipolar plate channels. This allows to emphasize the non-uniformity of water concentration, of the fluxes and as a consequence, of current density. The numerical results are compared with experimental data (water transport coefficient, local electrical performances) measured on two different fuel cells. This comparison validates at least partially the numerical models and provides further information for the analysis of water management within PEMFC
|
Page generated in 0.0585 seconds