The goal of this project was to develop a non-toxic amphiphilic diblock copolymer nanoparticulate drug delivery system that will solubilize paclitaxel (PTX) and retain the drug in plasma. Methoxy poly(ethylene glycol)-block-poly(ε-caprolactone) (MePEG-b-PCL) diblock copolymers loaded with PTX were characterized and their physicochemical properties were correlated with their performance as nanoparticulate drug delivery systems. A series of MePEG-b-PCL was synthesized with PCL blocks ranging from 2-104 repeat units and MePEG blocks of 17, 44 or 114 repeat units. All copolymers were water soluble and formed micelles except MePEG₁₁₄-b-PCL₁₀₄, which was water insoluble and formed nanospheres. Investigation of the effects of block length on the physicochemical properties of the nanoparticles was used to select appropriate copolymers for development as PTX nanoparticles. The critical micelle concentration, pyrene partition coefficient and diameter of nanoparticles were found to be dependent on the PCL block length. Copolymers based on a MePEG molecular weight of 750 g/mol were found to have temperature dependent phase behavior. Relationships between the concentration of micellized drug and the compatibility between the drug and core-forming block, as determined by the Flory-Huggins interaction parameter, and PCL block length were developed. Increases in the compatibility between PCL and the drug, as well as longer PCL block lengths resulted in increased drug solubilization. The physicochemical properties and drug delivery performance characteristics of MePEG₁₁₄-b-PCL₁₉ micelles and MePEG₁₁₄-b-PCL₁₀₄ nanospheres were compared. Nanospheres were larger, had a more viscous core, solubilized more PTX and released it slower, compared to micelles. No difference was seen in the hemocompatibility of the nanoparticles as assessed by plasma coagulation time and erythrocyte hemolysis. Micellar PTX had an in vitro plasma distribution similar to free drug. The majority of micellar PTX associated with the lipoprotein deficient plasma fraction (LPDP). In contrast, nanospheres were capable of retaining more of the encapsulated drug with significantly less PTX partitioning into the LPDP fraction. In conclusion, although both micelles and nanospheres were capable of solubilizing PTX and were hemocompatible, PTX nanospheres may offer the advantage of prolonged blood circulation, based on the in vitro plasma distribution data, which showed that nanospheres retained PTX more effectively.

Submitted by Marlene Santos (marlene.bc.ufg@gmail.com) on 2016-08-04T18:17:11Z No. of bitstreams: 2 Mestrado -Luciana Lavigne Linhares - 2016.pdf: 5586092 bytes, checksum: e3eb26a179f1a588ae5f1b655c9bde54 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) / Approved for entry into archive by Luciana Ferreira (lucgeral@gmail.com) on 2016-08-05T13:33:31Z (GMT) No. of bitstreams: 2 Mestrado -Luciana Lavigne Linhares - 2016.pdf: 5586092 bytes, checksum: e3eb26a179f1a588ae5f1b655c9bde54 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) / Made available in DSpace on 2016-08-05T13:33:31Z (GMT). No. of bitstreams: 2 Mestrado -Luciana Lavigne Linhares - 2016.pdf: 5586092 bytes, checksum: e3eb26a179f1a588ae5f1b655c9bde54 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Previous issue date: 2016-03-29 / The aim of this study was to compare the sunitinib loaded nanospheres with its free form, in the inhibition of induced corneal neovascularization, in albino rabbits, identifying the degree of inhibition of this neovascularization by measuring the area of corneal neovascularization. The eyes of eleven animals were divided into two groups. Group A (right eye of each rabbit) - sunitinib loaded nanospheres and Group B (left eye of each rabbit) - sunitinib solution. Both groups were submited to corneal alkaline burn by sodium hydroxide 1 mol/L. 12 hours after the corneal burn procedure, the group A received topical nanospheres loaded with sunitinib 0.5 mg/mL (Axon Medchem BV, Groningen, Holland), and the group B received 0.5 mg/mL of the sunitinib solution (Axon Medchem BV, Groningen, Holland). Treatment was initiated 12 hours after the surgical and was administered topically 2 times a day during 14 days. After 14 days of treatment all the rabbits were submitted to the examination of the anterior segment slit lamp examination and were photographed using the iSight camera of 8 megapixels with pixels of 1.5 μ. After euthanasia, the eyes were enucleated and sent for histopathological analysis. Neovascularization area in the upper cornea was measured in groups A and B. There was no statistically significant difference between the corneal neovascularization area in each group (p = 0.949). No changes were observed in ophthalmological clinical examination compatible with toxicity to the topical use of sunitinib loaded nanospheres and its free form. No histopathologic diferences were observed in both groups. We conclude that both the free form of sunitinib and sunitinib loaded nanospheres show no difference in inhibiting corneal neovascularization. / O objetivo deste estudo foi comparar a formulação de nanoesfera do malato de sunitinibe com a sua forma livre ou não encapsulada, na inibição de neovascularização corneana induzida em coelhos albinos, identificando o grau de inibição dessa neovascularização pela medida da área de neovasos corneanos. Os olhos de 11 (onze) animais foram divididos em 2 (dois) grupos. O grupo A (olho direito de cada coelho) e o grupo B (olho esquerdo de cada coelho). Ambos os grupos foram submetidos a queimadura corneana por hidróxido de sódio 1 mol/L. 12 horas após o procedimento de queimadura corneana, o grupo A recebeu solução tópica de nanoesfera de sunitinibe 0,5 mg/mL (Axon medchem BV, Groningen, Holanda), e o grupo B recebeu 0,5 mg/mL da forma livre do sunitinibe (Axon medchem BV, Groningen, Holanda). O tratamento foi iniciado 12 horas após o procedimento cirúrgico e foi topicamente administrado 2 vezes ao dia durante 14 dias. Após 14 dias, todos os coelhos foram submetidos ao exame de biomicroscopia do segmento anterior e fotografados usando a câmera iSight de 8 megapixels com pixels de 1,5 μ. Após eutanásia dos coelhos, os olhos foram enucleados e encaminhados para análise histopatológica. Foi realizada a mensuração da área de neovasos (em mm2) no terço superior da córnea dos grupos A e B. Não houve diferença estatisticamente significante entre as áreas de neovascularização corneana em cada grupo (p= 0,949). Não foram observadas alterações no exame clínico oftalmológico compatíveis com toxicidade tanto com a nanoesfera de sunitinibe como com a forma livre de sunitinibe. Não foram observadas diferenças histopatológicas nos dois grupos estudados. Conclui-se que tanto o sunitinibe associado à nanoesfera quanto a sua forma livre não apresentam diferença na inibição da neovascularização corneana induzida.

The goal of this project was to develop a non-toxic amphiphilic diblock copolymer nanoparticulate drug delivery system that will solubilize paclitaxel (PTX) and retain the drug in plasma. Methoxy poly(ethylene glycol)-block-poly(ε-caprolactone) (MePEG-b-PCL) diblock copolymers loaded with PTX were characterized and their physicochemical properties were correlated with their performance as nanoparticulate drug delivery systems. A series of MePEG-b-PCL was synthesized with PCL blocks ranging from 2-104 repeat units and MePEG blocks of 17, 44 or 114 repeat units. All copolymers were water soluble and formed micelles except MePEG₁₁₄-b-PCL₁₀₄, which was water insoluble and formed nanospheres. Investigation of the effects of block length on the physicochemical properties of the nanoparticles was used to select appropriate copolymers for development as PTX nanoparticles. The critical micelle concentration, pyrene partition coefficient and diameter of nanoparticles were found to be dependent on the PCL block length. Copolymers based on a MePEG molecular weight of 750 g/mol were found to have temperature dependent phase behavior. Relationships between the concentration of micellized drug and the compatibility between the drug and core-forming block, as determined by the Flory-Huggins interaction parameter, and PCL block length were developed. Increases in the compatibility between PCL and the drug, as well as longer PCL block lengths resulted in increased drug solubilization. The physicochemical properties and drug delivery performance characteristics of MePEG₁₁₄-b-PCL₁₉ micelles and MePEG₁₁₄-b-PCL₁₀₄ nanospheres were compared. Nanospheres were larger, had a more viscous core, solubilized more PTX and released it slower, compared to micelles. No difference was seen in the hemocompatibility of the nanoparticles as assessed by plasma coagulation time and erythrocyte hemolysis. Micellar PTX had an in vitro plasma distribution similar to free drug. The majority of micellar PTX associated with the lipoprotein deficient plasma fraction (LPDP). In contrast, nanospheres were capable of retaining more of the encapsulated drug with significantly less PTX partitioning into the LPDP fraction. In conclusion, although both micelles and nanospheres were capable of solubilizing PTX and were hemocompatible, PTX nanospheres may offer the advantage of prolonged blood circulation, based on the in vitro plasma distribution data, which showed that nanospheres retained PTX more effectively. / Pharmaceutical Sciences, Faculty of / Graduate

No description available.

The precise control of the resonance frequency of plasmonic nanostructures is critical and depends on the size, composition, shape, and dielectric nature of the environment. The ability to control the shape and size of nanomaterials acutely depends on the fabrication technique and material design. We used a cheap and scalable method known as nanosphere lithography (NSL) to fabricate plasmonic nano-prism (NP) on glass and indium tin oxide substrate (ITO). The methods involve substrate hydrophilicity treatment, polystyrene nanosphere masking, metal deposition, and mask removal. The array and specific morphology of the fabricated NP was established using scanning electron microscope (SEM) and atomic force microscope (AFM). Finally, we used UVVis spectroscopy to determine the plasmonic resonance frequencies of fabricated NP on different substrates. The results reported herein have potential applications in surface-enhanced Raman spectroscopy (SERS), and biosensing. We also used scanning tunneling microscope to obtain high spatial resolution images of supramolecular trigrams.

No description available.

Incorporation of silver nanoparticles (AgNPs) into an increasing number of consumer products has led to concern over the potential ecological impacts of their unintended release to the environment. Dissolution is an important environmental transformation that affects the form and concentration of AgNPs in natural waters; however, studies on AgNP dissolution kinetics are complicated by nanoparticle aggregation. Herein, nanosphere lithography (NSL) was used to fabricate uniform arrays of AgNPs immobilized on glass substrates. Nanoparticle immobilization enabled controlled evaluation of AgNP dissolution in an air-saturated phosphate buffer (pH 7, 25 °C) under variable NaCl concentrations in the absence of aggregation. Atomic force microscopy (AFM) was used to monitor changes in particle morphology and dissolution. Over the first day of exposure to ≥10 mM NaCl, the in-plane AgNP shape changed from triangular to circular, the sidewalls steepened, and the height increased by 6-12 nm. Subsequently, particle height and in-plane radius decreased at a constant rate over a 2-week period. Dissolution rates varied linearly from 0.4 to 2.2 nm/d over the 10-550 mM NaCl concentration range tested. NaCl-catalyzed dissolution of AgNPs may play an important role in AgNP fate in saline waters and biological media. This study demonstrates the utility of NSL and AFM for the direct investigation of un-aggregated AgNP dissolution. / Master of Science

Metal-based nanoparticles (MNPs) are becoming increasingly common in commercial products. Release of these materials into the environment raises concerns about the potential risks they pose to aquatic life. Predicting these risks requires an understanding of MNPs' chemical transformations. In this study, arrays of immobilized MNPs fabricated by nanosphere lithography (NSL) were used to investigate environmental transformations of MNPs. Specifically, sulfidation of silver nanoparticles (Ag NPs) and dissolution of copper-based nanoparticles (Cu NPs) were investigated. Atomic force microscopy (AFM) and transmission electron microscopy were the primary analytical techniques for these investigations. Because the MNPs were immobilized on a solid surface, the samples were field deployable, environmentally relevant metal concentrations were maintained, and the confounding influence of MNP aggregation was eliminated. Ag NP samples were deployed in a full-scale wastewater treatment plant. Sulfidation occurred almost exclusively in anaerobic zones of the WWTP, where the initial sulfidation rate was 11-14 nm of Ag converted to Ag2S per day. Conversion to Ag2S was complete within 7-10 d. Dissolution rates of Cu-based NPs were measured in situ over a range of pH by flow-cell AFM. Based on the measured rates, CuO/Cu(OH)2 NPs dissolve completely within a matter of hours at any pH, metallic Cu NPs persist for a few hours to days, and CuxS NPs do not dissolve significantly over the time scales studied. Field deployment of samples in a freshwater stream confirmed these conclusions for a natural aquatic system. This research demonstrates that environmental transformations of MNPs will be a key factor in determining the ultimate form and concentration of NPs that aquatic organisms will be exposed to. / Ph. D.

The environmental fate and transport of engineered nanomaterials have been broadly investigated and evaluated in many published studies. Silver nanoparticles (AgNPs) represent one of the most widely manufactured nanomaterials. They are currently being incorporated into a wide range of consumer products due to their purported antimicrobial properties. However, either the AgNPs themselves or dissolved Ag+ ions has a significant potential for the environmental release. The safety issues for nanoparticles are continuously being tested because of their potential danger to the environment and human health. Studies have explored the toxicity of AgNPs to a variety of organisms and have shown such toxicity is primarily driven by Ag+ ion release. Dissolution of nanoparticles is an important process that alters their properties and is a critical step in determining their safety. Therefore, studying nanoparticles' dissolution can help in the current move towards safer design and application of nanoparticles. This research endeavor sought to acquire comprehensive kinetic data of AgNP dissolution to aid in the development of quantitative risk assessments of AgNP fate. To evaluate the dissolution process in the absence of nanoparticle aggregation, AgNP arrays were produced on glass substrates using nanosphere lithography (NSL). Changes in the size and shape of the prepared AgNP arrays were monitored during the dissolution process by atomic force microscopy (AFM). The dissolution of AgNP is affected by both internal and external factors. First, surface coating effects were investigated by using three different coating agents (BSA, PEG1000, and PEG5000). Capping agent effects nanoparticle transformation rate by blocking reactants from the nanoparticle surface. Coatings prevented dissolution to different extents due to the various way they were attached to the AgNP surface. Evidence for the existence of bonds between the coating agents and the AgNPs was obtained by surface enhanced Raman spectroscopy. Moreover, to study the size effects on AgNP dissolution, small, medium, and large sized AgNPs were used. The surrounding medium and temperature were the two variables that were included in the size effects study. Relationships were established between medium concentration and dissolution rate for three different sized AgNP samples. By using the Arrhenius equation to plot the reaction constant vs. reaction temperature, the activation energy of AgNPs of different sizes were obtained and compared. / Doctor of Philosophy / Nanomaterials, defined as materials with at least one characteristic dimension less than 100 nm, often have useful attributes that are distinct from the bulk material. The novel physical, chemical, and biological properties enable the promising applications in various manufacturing industry. Silver nanoparticles (AgNPs) represent one of the most widely manufactured nanomaterials and has been used as the antimicrobial agent in a wide range of consumer products. However, either the AgNPs themselves or dissolved Ag+ ions has a significant potential for the environmental release. The environmental fate and transport of AgNPs drawn considerable attentions because of the potential danger to environment and human health. Dissolution of nanoparticles is an important process that alters their properties and is a critical step in determining their safety. Ag+ ions migrate from the nanoparticle surface to the bulk solution when an AgNP dissolves. Studying nanoparticles' dissolution can help in the current move towards safer design and application of nanoparticles. This research aimed to acquire comprehensive kinetic data of AgNP dissolution to aid in the development of quantitative risk assessments of AgNP fate. AgNP arrays were produced on glass substrates using nanosphere lithography (NSL) and changes in the size and shape during the dissolution process were monitored by atomic force microscopy (AFM). First, surface coating effects were investigated by using three different coating agents. Coatings prevented dissolution to different extents due to the various way they were attached to the AgNP surface. Moreover, small, medium, and large sized AgNPs were used to study the size effects on AgNP dissolution. The surrounding medium concentration and temperature were the two variables that were included in the size effects study.

Estruturas líquidas cristalinas estão presentes em materiais compostos por moléculas com anisotropia de forma e são caracterizadas por uma ordem orientacional de longo alcance. Na mesofase nemática as moléculas alongadas tendem a se alinhar paralelas entre si, a direção média de orientação define é caracterizada por um vetor unitário, chamado de diretor n. Os cristais líquidos liotrópicos são obtidos usualmente a partir da dispersão de moléculas anfílicas em água. Essas moléculas anfílicas, por terem uma parte polar e uma parte apolar, tendem a formar agregados anisotrópicos, com a parte polar da molécula na superfície. Esse tipo de estrutura esta presente em todos os seres vivos e o exemplo mais clássico é a membrana da célula. A existência de uma superfície de contorno ou uma fronteira modifica as propriedades de um material na vizinhança dessa fronteira. Isso é particularmente verdadeiro para os cristais líquidos, que são muitos sensíveis as condições de contorno, mesmos quando estas não são tão intensas. De fato essa propriedade e bastante útil para a fabricação de dispositivos eletro-ó pticos. Um dos efeitos de superfície mais evidente é a mudança no ordenamento das moléculas devido a quebra de simetria na superfície. Nas fases nemáticas esse efeito microscópico resulta na formação de uma camada superficial com uma ordem posicional que se estende ao longo de uma certa distância no volume. 0 outro efeito resulta da origem a mudanças significativas no estado orientacional das moléculas no volume devido a presença de forças superficiais. Esse efeito é conhecido como ancoramento. Na ausência de campos extemos ou condições de contorno qualquer orientação é igualmente provável. Neste trabalho serão apresentados os resultados de investigação das propriedades de cristais líquidos liotrópicos na interface com um substrata. Estudamos o comportamento dinâmico da camada superficial quando o campo magnético é aplicado e induz uma re­ orientação do diretor. Nesse estudo são utilizadas amostras de cristal líquidos liotrópicos. / Liquid crystalline structures are found in materials made from molecules which are anisotropic in shape; such material are characterized mainly by a long range orientational order. In the nematic phase, the rodlike molecules tend to align parallel to each other. The average orientation defines a unit vector, called director n. Lyotropic liquid crystals are usually obtained by the dispersion of amphiphilic molecules in water. Due the fact that these molecules present a polar head and a non-polar tail, they tend to form aggregates with the polar part at the aggregate surface. This type of struc­ ture is present in all living being; the most classical example is the cell membrane. The existence of a boundary surface affects the properties of a material close to this boundary. This particularly true for liquid crystals, which are very sensitive to boundary conditions, even when weak. Indeed, this property is quite useful in the fabrication of electro-optic devices. One of the most obvious surface effect is the change in the molecules organization due to a breaking of the symmetry at the boundary surface. In the nematic phases, this microscopic effect results in the formation of a surface la yer with a positional order that extends through the bulk up to a certain distance from the surface. The other effect of the surface results in a change in the orientational state of the molecules in the volume due to the sur face forces. This macroscopic effect is known as anchoring. In the absence of any external field or boundary conditions, all molecular orientation is equally probable. In this work, we will present some results of the investigation of the properties of lyotropic liquid crystals at the interface with a solid substrate. We have studied the dy­ namic of the surface layer when a applied magnetic field induces a reorientation of the nematic director. In this study different systems were used: lyotropic liquid crystals in the nematic phase, ferronematics (nematic phase doped with ferrofluid) and filled nematics (nematic phase doped with silica nano-spheres). By means of transmittance measurements.