No description available.

A better understanding of how the nanoscale environment affects the mechanical properties of materials, in particular metallic nanoparticles and nanocrystalline metals is vital to the development of next generation materials. Of special interest is obtaining a fundamental understanding of the inverse Hall-Petch Effect in nanocrystalline metals, and nanoindentation in individual nanoparticles. Understanding these subjects is critical to understanding how the mechanical properties of materials are fundamentally affected by nanoscale dimensions. These topics have been addressed by a combination of theoretical modeling and in-situ nanoindentation transmission electron microscopy (TEM) analysis. Specifically, the study of the inverse Hall-Petch effect in nanocrystalline metals will be investigated by a thorough review of the literature followed by a proposed novel theoretical model that better explains the experimentally observed behavior of nanocrystalline metals. On the other hand, the nanoindentation of individual nanoparticles is a very new research topic that has yet to aggregate a large body of experimental data. In this context, in-situ TEM nanoindentation experiments on silver nanoparticles will be first performed to determine the mechanisms of deformation in these nanostructures. A theoretical explanation for the observed deformation mechanisms will be then developed and its implications will be discussed. In addition to nanoparticles, this study will also provide unique and valuable insight into the deformation mechanisms of nanopillars, a growing area of research despite much controversy and speculation about their actual mechanisms of deformation. After studying the novel behavior of both nanocrystalline metals and nanoparticles, useful applications of both classes of materials will be explored. The discussion of applications will focus on utilizing the interesting behaviors explored in the dissertation. Of particular interest will be applications of nanoparticles and nanocrystalline materials to coatings, radiation resistance and super-plastic materials. / text

The purpose of the work presented in this thesis was to explore and understand the mechanisms governing toughness, ductility and ballistic performance in a class of nanostructured carbide-free bainite-austenite steels, sometimes known as ‘superbainite’. The mechanical properties of these alloys have been extensively reported, but their interpretation is not clear. The thesis begins with an introduction to both the relevant nanostructures and some of the difficulties involved in explaining observed properties, alongside a summary of the role of mixed- microstructures in alloy development. An overview of the debate regarding the mechanism of bainite formation is pre- sented in Chapter 2, in the form of a literature survey encompassing the period of explicit recognition of the bainite microstructure. Of note is the role played by the displacive theory of formation in the development of the alloy structures investigated in this thesis. A characterisation of a commonly available bainitic alloy forms the basis for Chapter 4. Observations confirm the nanoscale nature of the structure, although additional phases are found to be present, namely: cementite and martensite. This is explained as resulting from relatively low alloying additions and chem- ical segregation effects, which are modelled using thermodynamic and kinetic approaches. Chapters 5 and 6 contain a comprehensive study of the response of this alloy to the stress concentration present at the notch root of a Charpy impact sample. The work provides evidence of notch root embrittlement due to stress-induced martensite transformation. Results from synchrotron and laboratory X-ray experiments in particular reveal that machining, as well as applied stress, can initiate the austenite-martensite transformation, and methods to mitigate this effect are suggested. An innovative approach is harnessed in Chapter 7, in order to identify exper- imentally the volume fraction at which three-dimensional connectivity (‘percolation’) of austenite is lost in a superbainitic steel. Hydrogen thermal desorption techniques are applied to this problem, inspired by the tendency of such alloys to undergo tensile failure with limited or zero necking. The striking result sheds light on the importance of austenite morphology in restricting the diffusion of hydrogen into a mixed structure. The final set of experimental work is directed towards understanding the damage mechanisms that occur during projectile penetration of a coarser bainitic armour- plate alloy. The formation of adiabatic shear bands is found to be a dominant factor governing the ballistic failure of the plate. The sheared material undergoes severe high-temperature deformation, but does not change phase upon cooling, leading to the proposal of certain methods that could be implemented to improve ballistic resistance of the steel. The totality of the research presented herein is summarised in Chapter 9, which draws attention to new areas of interest that have arisen from the current work, proposing several future directions of investigation. The broader issue of understanding, common to all studies performed thus far, is that of the causes, effects, and extent, of stress-induced transformation to martensite experienced by the retained austenite that is a key feature of superbainite and similar steels.

Irradiation of metals with energetic particles causes heavy damage effects in microstructure and mechanical properties, which is closely associated with irradiation conditions, presence of impurities, and microstructural features. It has been proposed that the radiation tolerance of a certain material can be enhanced by introducing a high density of interfaces, acting as ‘sinks’ that can frequently involve in attracting, absorbing and annihilating defects. Nanostructured materials with large volume fraction of interfaces, therefore, are assumed to be more radiation tolerant than conventional materials. This thesis focuses on the radiation damage effects in nanostructured Cu via the methods of in-situ TEM (transmission electron microscope) radiation experiments, postirradiation TEM analyses, small-mechanical tests (nanoindentation and micro-pillar compression), and computer simulations (molecular dynamics and phase-field modeling). We design and fabricate nanostructured Cu using direct current (DC) magnetron sputtering deposition technique, a typica physical vapor deposition (PVD) method and a bottom-up way to construct various nanostructured metals. High-density twin boundaries (TBs) and nanovoids (NVs) are introduced into two distinct nanostructured Cu films, including nanovoid-nanotwinned (NVNT) Cu (111) and nanovoid (NV) Cu (110). The in-situ high-energy Kr⁺⁺ (1 MeV) and ex-situ low energy He⁺ (< 200 keV) irradiations are subsequently preformed on the as-deposited Cu samples. On the one hand, the in-situ TEM observations suggest that TBs and NVs can influence the formation, distribution and stability of radiation-induced defects. Meanwhile, the preexisting microstructures also undergo structural change through void shrinkage and twin boundary migration. On the other hand, the ex-situ micro-pillar compression tests reveal that the Heirradiated NV-NT Cu contains less defect clusters but experiences more radiation-induced hardening. The underlying mechanisms of void shrinkage, twin boundary migration, and radiationinduced hardening are fully discussed based on post-irradiation analyses and computer simulations.