Yes / Melt blending of polyolefin/carbon nanotube (CNT) composites always leads to serious agglomeration of CNTs and hence inferior properties. Thus, well-dispersed CNTs within matrix are urgently required during processing. In this work, effective breakage of CNT agglomerates was achieved by solid-phase die drawing at a temperature below but near to the melting temperature of the matrix. Experimental results indicate that the incurred extensional stress provides a high orientation degree on the polypropylene (PP) matrix and consequently helps rupture CNT agglomerates, leading to improved alternating current（AC） conductivity by ~5–6 orders in magnitude. The reduced agglomerate ratio, the altered CNT networks (3D→2D), and the improved interfacial morphology between CNT and matrix are suggested to be responsible for the viscoelasticity variation of the composite melt and the improved property of PP/multiwalled CNTs (MWCNTs) composite. The initial loss of tensile ductility by the incorporation of MWCNTs is recovered by nearly 100%, which was attributed to the low agglomeration rate and improved interfacial morphology. This article provided the potential inspiration for the melt blending of polymer melt and CNTs. / China Scholarship Council. Grant Number: 201806465028

<p>In this thesis, I present a simple, sensitive and low cost electrochemical nanobiosensor for quantitative determination of the herbicides glufosinate, glyphosate and its metabolite aminomethylphosphonic acid (AMPA). Firstly, the nanostructured poly(2,5-dimethoxyaniline) (PDMA) materials were synthesized on gold electrode by the electrochemical &ldquo / soft template&rdquo / method using poly(4-styrenesulfonic acid) (PSS) as the dopant and structure-directing molecule. Fourier transform infrared (FTIR) spectroscopy, UV-Vis Spectroscopy, Transmission electron microscopy (TEM) and Scanning electron microscopy (SEM) studies inferred successful doping of the nanostructured PDMA film by PSS and that the template PSS directed the synthesis of both nanotubes and nanoparticles of PDMA with diameters less than 100 nm.</p>

<p>In this thesis, I present a simple, sensitive and low cost electrochemical nanobiosensor for quantitative determination of the herbicides glufosinate, glyphosate and its metabolite aminomethylphosphonic acid (AMPA). Firstly, the nanostructured poly(2,5-dimethoxyaniline) (PDMA) materials were synthesized on gold electrode by the electrochemical &ldquo / soft template&rdquo / method using poly(4-styrenesulfonic acid) (PSS) as the dopant and structure-directing molecule. Fourier transform infrared (FTIR) spectroscopy, UV-Vis Spectroscopy, Transmission electron microscopy (TEM) and Scanning electron microscopy (SEM) studies inferred successful doping of the nanostructured PDMA film by PSS and that the template PSS directed the synthesis of both nanotubes and nanoparticles of PDMA with diameters less than 100 nm.</p>

Philosophiae Doctor - PhD / In this thesis, I present a simple, sensitive and low cost electrochemical nanobiosensor for quantitative determination of the herbicides glufosinate, glyphosate and its metabolite aminomethylphosphonic acid (AMPA). Firstly, the nanostructured poly(2,5-dimethoxyaniline) (PDMA) materials were synthesized on gold electrode by the electrochemical "template"method using poly(4-styrenesulfonic acid) (PSS) as the dopant and structure-directing molecule. Fourier transform infrared (FTIR) spectroscopy, UV-Vis Spectroscopy, Transmission electron microscopy (TEM) and Scanning electron microscopy (SEM) studies inferred successful doping of the nanostructured PDMA film by PSS and that the template PSS directed the synthesis of both nanotubes and nanoparticles of PDMA with diameters less than 100 nm. / South Africa

In this thesis, monomer casting (MC) nylon was synthesized. MC nylon could replace nonferrous metals in certain applications, including gears, wheels, and other moving parts. However, compared with metals, MC nylon products have poor strength and stiffness, and crack easily, especially at low temperatures. In addition, the dimensional stability of MC nylon is poor, especially in the large casting nylon products, causing significant internal stresses due to shrinkage. Thus, MC nylon cracks easily when cast and molded. The yttrium hydroxide particles were modified by stearic acid and dispersed in the caprolactam. The polymerization time was short due to fast anionic polymerization. Copolymerization with different ratios of yttrium hydroxide particles can be used to prepare the copolymer. The effects of different amounts of yttrium hydroxide on the performance of the monomer casting nylon were studied. The products were characterized using X-ray diffraction, impact, and tensile testing. When the percentage of modified yttrium hydroxide is 0.3 wt %, the composite exhibits the maximum impact strength, thus the 0.3 wt % of modified yttrium hydroxide is the suitable percentage to enhance the impact strength of MC nylon. Transparency and color of polyethylene film layered packages change with the number of layers. When polyethylene layer thickness is between 50 µm and 200 µm, each additional subsequent layer in the package leads to an abrupt change of color and transparency. Polarized light optical effects can be used to manufacture packaging films and labels with forgery protection. A significant influence of the scaling factor on the latent effect and optical properties of the film package is demonstrated for 1 to 6 layers with the total thickness of 200±50 µm. Prior thermal treatment of individual layers before they are assembled into a package or assembled package heat treatment change the laminate color. This allows hidden marking and recording text or graphics on the multi-layer films, not visible under normal lighting conditions, but appearing when viewed in polarized light, or through the polarizer.

Cette thèse porte sur la production et l’étude de mousses de polymères micro ou nanoporeux à partir de mélanges nanostructurés à base de PMMA (poly(méthyl méthacrylate)) par dissolution et moussage avec CO2. D’autre part, plusieurs techniques expérimentales ont été améliorées ou adaptées afin de fournir de précieuses informations sur les systèmes étudiés. La nanostructuration de mélanges solides denses à base de PMMA est induite par l’addition d’un copolymère à blocs (MAM, poly(méthyl méthacrylate)-co-poly(butylacrylate)-co-poly(méthyl méthacrylate)). Les structures cellulaires des mousses produites à partir de ces mélanges ont été caractérisées et expliquées ; on a démontré que la nanostructuration agit comme un modèle (un gabarit) pour la structure cellulaire, permettant l’obtention d’un large éventail de structures cellulaires et en particulier des mousses nanocellulaires. De plus il est démontré que les paramètres du procédé, tels que la pression et la température, permettent la différenciation entre les deux voies de moussage utilisées ;ceux-ci ont une influence significative sur les caractéristiques finales des mousses de PMMA seul, mais peu sur celles des mélanges PMMA/MAM. Les mousses dans ces mélanges présentent un mécanisme de nucléation hétérogène contrôlée par la nanostructuration, ce qui permet de limiter l’influence des paramètres de traitement thermique dans la nucléation de la cellule. En outre, certains mélanges de PMMA/MAM présentent également une remarquable stabilité de leur morphologie au cours de la croissance cellulaire, ce qui évite l’effondrement cellulaire et la coalescence.Enfin, on a étudié l’influence de la transition entre les structures micro-cellulaires et les structures nano-cellulaires sur les propriétés : une nette diminution de la conductivité thermique en raison de l’effet de Knudsen que nous avons mis en évidence, une augmentation notable de la température de transition vitreuse en raison de l’isolement des chaînes de polymères dans les parois (les murs) de la cellule ; mais n’avons pas noté d’influence importante de cette transition sur le module de Young. / This dissertation focuses on the production and study of nanocellular foams from PMMA based(poly(methyl methacrylate) materials by CO2 gas dissolution foaming.Due to the novelty of this research field several experimental techniques have been improved or adapted in order to provide valuable information from the systems understudy. Nanostructuration of PMMA-based blends induced by the addition of a block copolymer (MAM, poly(methyl methacrylate)-b-poly(butyl acrylate)-b-poly(methyl methacrylate)) and the cellular structure of the foams produced from these blends have been characterized and related; obtaining that the nanostructuration acts as a pattern for the cellular structure, allowing obtaining a wide range of cellular structures and in particular nanocellular foams. It is demonstrated that processing parameters, such as pressure and temperature, allow differentiating between two foaming routes ; and present a significant influence on the foaming process and final characteristics of neat PMMA foams, but not on PMMA/MAM blends. PMMA/MAM blends present a heterogeneous nucleation mechanism controlled by the nanostructuration that avoid the influence of the processing parameters in the cell nucleation. In addition, some PMMA/MAM blends also present a high stability during the cell growth, avoiding the cellular collapse and coalescence. Finally, it has been studied the influence on the foams properties of the transition between the microcellular and the nanocellular ranges; obtaining that there is a clear influence on the thermal conductivity, which decreases in nanocellular foams due to the Knudsen effect,and the glass transition temperature, which increases in nanocellular foams due to the confinement of the polymer chains in the cell walls, but not on the Young’s modulus. / Esta tesis se centra en la producción y estudio de de espumas poliméricas nanocelulares producidas a partir de materiales basados en PMMA (poli(metil metacrilato)), mediante la técnica de espumado por disolución de gas usando CO2. Debido a la novedad de este campo de investigación ha sido necesario mejorar o adaptar varias técnicas experimentales para obtener la información necesaria de los sistemas bajo estudio. Se han caracterizado y relacionado la nanoestructuración de mezclas basadas en PMMA, inducida por la adición de un copolímero de bloque (MAM, poli(metil metacrilato)-copoli(butil acrilato)-co-poli(metil metacrilato)), y la estructura celular de las espumas producidas a partir de esas mezclas; obteniéndose que la nanoestructuración actúa como patrón para la estructura celular, permitiendo obtener una amplia variedad de estructuras celulares y en particular de estructuras nanocelulares.Se ha demostrado que los parámetros de procesado, como la presión y temperatura,permiten diferenciar entre dos rutas de espumado y presentan una influencia significativa en las características finales de las espumas de PMMA puro, pero no en las mezclas de PMMA/MAM. Estas mezclas presentan un mecanismo de nucleación heterogénea controlado por la nanoestructuración, que evita que los parámetros de procesado influyanen el proceso de nucleación de las celdas. Además, algunas mezclas de PMMA/MAM también presentan una alta estabilidad durante el crecimiento de las celdas, evitando el colapso de la estructura celular y la coalescencia.Finalmente, se ha estudiado la influencia en las propiedades de las espumas de la transición entre el rango microcelular y el rango nanocelular; obteniéndose que hay una clara influencia sobre la conductividad térmica, que decrece en las espumas nanocelulares debido al efecto Knudsen, y sobre la temperatura de transición vítrea, que se incrementa debido al confinamiento de las cadenas poliméricas en las paredes de las celdas, pero no sobre el módulo de Young.