Apart from being a support, the three substrates had their own roles in the growth of CNTs. Bamboo charcoal also acted as a catalyst provider. Au-coated silicon wafer participated in the formation of the silica/CNT composite nanowires. Copper foil itself was a catalyst. The silicate, the Au/Si droplet, and the copper particles were the catalysts for the growth of CNTs in these three substrates, respectively. The formation of the CNTs followed the vapor-liquid-solid (VLS) route which involved the decomposition of ethanol vapor into carbon, carbon dissolution inside the liquid catalyst and precipitation to form CNTs. / CNTs could be grown in a very wide temperature range (700-1400°C), but specific substrate for a particular temperature range was needed. The structures of the CNTs varied with the CVD processing conditions. The forms and the amount of catalytic material entering the interior of the CNTs depended on the characteristics of the catalyst for that process / The products formed on different substrates had their own characteristic features . Hollow or silicate filled CNTs with silicate droplet tips were formed on the surface of bamboo charcoal. Their diameter was in hundreds of nanometers and the length was about several microns. CNT-coated silica core-shell structures were obtained on Au-coated silicon wafer. The graphitic carbon shell was formed in thickness about 145 nm for the sample prepared at 1185°C, but amorphous carbon shell was produced in thickness more than 300 nm for the sample prepared at 1236°e. Lastly, CNTs with bamboo-like structure were synthesized on the copper foil substrate. The CNTs were getting thicker from 70 nm to 170 nm when temperature was increased from 700°C to 1000°C. The yield increased with temperature and annealing time if the sample was annealed for less than 30 min. / We report the growth of carbon nanotubes (CNTs) on different types of substrates with or without catalytic materials by using different approaches. The roles of the substrates and the catalysts in the formation of the CNTs are studied . We also characterized and identified the structural properties of the CNTs products. In this work, three types of substrates had been used, namely biomorphic bamboo charcoal , Au-coated silicon wafer, and copper foil. The CNTs were grown on different substrates by chemical vapor deposition (CVD) method at temperature range between 700°C and 1400°C. Ethanol vapor was used as the carbon source, while tetraethyl orthosilicate (TEOS) vapor was also applied to the process for bamboo charcoal. / Zhu, Jiangtao = 碳納米管在不同類型基底上的生長 / 朱江濤. / Adviser: D. H. L. Ng. / Source: Dissertation Abstracts International, Volume: 72-11, Section: B, page: . / Thesis (Ph.D.)--Chinese University of Hong Kong, 2009. / Includes bibliographical references. / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [201-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstract also in Chinese. / Zhu, Jiangtao = Tan na mi guan zai bu tong lei xing ji di shang de sheng chang / Zhu Jiangtao.

No description available.

Yes / Thermoplastic polyurethane (TPU)/multi-walled carbon nanotubes (CNT) nanocomposites were prepared by twin-screw extrusion and micro injection molding. The electrical conductivity of micro injection molded polymer nanocomposites exhibits a low value and uneven distribution in the micromolded samples. Real-time tracing of electrical conductivity was conducted to investigate the post thermal treatment on the electrical conductivity of microinjection molded composites. The results show that postmolding thermal treatment leads to a significant increase in the electrical conductivity by over three orders of magnitude for 5 wt % CNT-filled TPU composites. In-situ Transmission electron microscopy confirms the conductive CNT network does not change at the micron/sub-micron scale during thermal treatment. TEM image analysis by a statistical method was used to determine the spatial distribution of CNT in the sample and showed that the average distance between adjacent CNT reduced slightly at the nanometer scale after postmolding thermal treatment. A new conductive mechanism is proposed to explain the enhancement of electrical conductivity after thermal treatment, i.e. micro-contact reconstruction of adjacent CNT in the polymer matrix through annealing-induced relaxation of interfacial residual stress and strain. Raman spectra and small angle X-ray scattering curve of annealed samples provide supporting evidence for the proposed new conductive mechanism. The electron tunneling model was used to understand the effect of inter-particle distance on the conductivity of polymer composites. / Chinese Ministry of Education. Grant Number: 313036; National Natural Science Foundation of China. Grant Number: 51433006

The unique electronic, mechanical and physical properties led Carbon nanotubes (CNTs) to be potential candidate for field emitter, hydrogen storage, sensors, nano electronic devices, nano electromechanical systems, polymer composites. In order to make them in the industrial scale we need large quantity production of CNTs with low cost. The present thesis work deals with the preparation of CNTs by pyrolysis method from xylene and further studies on the grown CNTs. Magnetic characterization of CNTs has been done using SQUID. The interaction of CNTs with the microwave irradiation is studied and it was found for the first time that there is light emission from the CNTs apart from direct electric field. In this process we also observed that the static charge develops on the CNTs. A composite of CNTs/DNA has been prepared with varying CNT content and the electrical conductivity measurements have been done. The first chapter of the thesis provides an introduction to carbon family. Carbon nanotubes, which are potential candidates from carbon family, is a growing field for research in science and technology. A glimpse of various methods of preparation of CNTs like arc-discharge, laser ablation, chemical vapour deposition (CVD), hot-filament CVD, plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance (ECR PECVD), high-pressure catalytic decomposition of carbon monoxide (HiPCO), pyrolysis are discussed. Some applications of CNTs are also included in this chapter. The second chapter deals with the experimental techniques employed for the preparation of CNTs and their characteristics studied by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD) and Raman Spectroscopy (RS). The preparation of CNTs from xylene as carbon source and ferrocene as catalyst in pyrolysis method is described in detail. Well aligned CNTs with a length of several tens of micrometers and diameter of 40 to 80 nanometers were obtained as confirmed by SEM. TEM and XRD confirms the graphitic crystal structure of the CNTs. RS also confirms the information about the crystal structure. The third chapter discusses the magnetic studies on CNTs using Superconducting Quantum Interference Device (SQUID) as a function of magnetic field and temperature. In the random mixture of parallel, perpendicular and oblique nanotubes, the applied field produces diamagnetic behavior, although the sample possess different kinds of tubes with various chirality and radii. Paramagnetic deviation was observed on the diamagnetic susceptibility at weak fields and low temperature, confirming qualitatively with the Aharonov-Bhom effect on the energy gap for the magnetic field parallel to the tube axis Chapter four presents the light emission from the CNTs. It describes the light emission from different processes reported in the literature. Here we have observed a new process to generate light from CNTs through microwave irradiation. Along with the light emission some of the tubes get charged and some tubes are physically broken. We provide a simple approach as to why the tubes break and the nature of the breakage is also discussed. The fifth chapter discusses the preparation of CNTs/DNA composites. The conductivity increases with increasing carbon nanotube weight percentage. The increase in conductivity as a function of the CNTs weight percent is attributed to the introduction of conducting CNTs path in the DNA matrix. A summary of the results obtained and the scope for future work are included in the chapter six of the thesis.