On-board gimbal systems for camera stabilization in helicopters are typically based on linear models. Such models, however, are inaccurate due to system nonlinearities and complexities. As an alternative approach, artificial neural networks can provide a more accurate model of the gimbal system based on their non-linear mapping and generalization capabilities. This thesis investigates the applications of artificial neural networks to model the inertial characteristics (on the azimuth axis) of the inner gimbal in a gyro-stabilized multi-gimbal system. The neural network is trained with time-domain data obtained from gyro rate sensors of an actual camera system. The network performance is evaluated and compared with measured data and a traditional linear model. Computer simulation results show the neural network model fits well with the measured data and significantly outperforms a traditional model.

With all the advancements in autonomous and connected cars, there is a developing body of research around the security and robustness of driving automation systems. Attacks and mitigations for said attacks have been explored, but almost always solely in software simulations. For this thesis, I led a team to build the foundation for an open source platoon of scale semi-autonomous vehicles. This work will enable future research into implementing theoretical attacks and mitigations. Our 1/10 scale car leverages an Nvidia Jetson, embedded microcontroller, and sensors. The Jetson manages the computer vision, networking, control logic, and overall system control; the embedded microcontroller directly controls the car. A lidar module is responsible for recording distance to the preceding car, and an inertial measurement unit records the velocity of the car itself. I wrote the software for the networking, interprocess, and serial communications, as well as the control logic and system control.

The United States trucking industry is immense. Employing over three million drivers and traveling to every city in the country. Semi-Trucks travel millions of miles each week and encompass roads that civilians travel on. These vehicles should be safe and allow efficient travel for all. Autonomous vehicles have been discussed in controls for many decades. Now fleets of autonomous vehicles are beginning their integration into society. The ability to create an autonomous system requires domain and system specific knowledge. Approaches to implement a fully autonomous vehicle have been developed using different techniques in control systems such as Kalman Filters, Neural Networks, Model Predictive Control, and Adaptive Control. However some of these control techniques require superb models, immense computing power, and terabytes of storage. One way to circumvent these issues is by the use of an adaptive control scheme. Adaptive control systems allow for an existing control system to self-tune its performance for unknown variables i.e. when an environment changes. In this thesis a LQR error state control system is derived and shown to maintain a magnitude of 15 cm of steady state error from the center-line of the road. In addition a proposed LQR-MRAC controller is used to test the robustness of a lane-keeping control system. The LQR-MRAC controller was able to improve its transient response peak error from the center-line of the road of the tractor and the trailer by 9.47 [cm] and 7.27 [cm]. The LQR-MRAC controller increased tractor steady state error by 0.4 [cm] and decreased trailer steady state error by 1 [cm]. The LQR-MRAC controller was able to outperform modern control techniques and can be used to improve the response of the tractor-trailer system to handle mass changes in its environment.

Unmanned aerial vehicles have developed rapidly in recent years due to technological advances. UAV technology can be applied to a wide range of applications in surveillance, rescue, agriculture and transport. The problems that can exist in these areas can be mitigated by combining clusters of drones with several technologies. For example, when a swarm of drones is under attack, it may not be able to obtain the position feedback provided by the Global Positioning System (GPS). This poses a new challenge for the UAV swarm to fulfill a specific mission. This thesis intends to use as few sensors as possible on the UAVs and to design the smallest possible information transfer between the UAVs to maintain the shape of the UAV formation in flight and to follow a predetermined trajectory. This thesis presents Extended Kalman Filter methods to navigate autonomously in a GPS-denied environment. The UAV formation control and distributed communication methods are also discussed and given in detail.

No description available.

Attitude control remains one of the top engineering challenges faced by small satellite mission planning and design. Conventional methods for attitude control include propulsion, reaction wheels, magnetic torque coils, and passive stabilization mechanisms, such as permanent magnets that align with planetary magnetic fields. Drawbacks of these conventional attitude control methods for small satellites include size, power consumption, dependence on external magnetic fields, and lack of full control authority. This research investigates an alternative, novel approach to attitude-control method for small satellites, utilizing the noncommutative property of rigid body rotation sequences. Piezoelectric bimorph actuators are used to induce sinusoidal small-amplitude satellite oscillations on two of the satellites axes. While zero net change occurs on these signaled axes, the third axis can develop an average angular rate. This noncommutative attitude control methodology has several advantages over conventional methods, including scalability, power consumption, and operation outside of Earth's magnetic field. This research looks into the feasibility of such a system, and lays the foundation for a simple control system architecture.

As electronics become smaller and more capable, it has become possible to conduct meaningful and sophisticated satellite missions in a small form factor. However, the capability of small satellites and the range of possible applications are limited by the capabilities of several technologies, including attitude determination and control systems. This dissertation evaluates the use of image-based visual attitude propagation as a compliment or alternative to other attitude determination technologies that are suitable for miniature satellites. The concept lies in using miniature cameras to track image features across frames and extracting the underlying rotation. The problem of visual attitude propagation as a small satellite attitude determination system is addressed from several aspects: related work, algorithm design, hardware and performance evaluation, possible applications, and on-orbit experimentation. These areas of consideration reflect the organization of this dissertation. A “stellar gyroscope” is developed, which is a visual star-based attitude propagator that uses relative motion of stars in an imager’s field of view to infer the attitude changes. The device generates spacecraft relative attitude estimates in three degrees of freedom. Algorithms to perform the star detection, correspondence, and attitude propagation are presented. The Random Sample Consensus (RANSAC) approach is applied to the correspondence problem to successfully pair stars across frames while mitigating false-positive and false-negative star detections. This approach provides tolerance to the noise levels expected in using miniature optics and no baffling, and the noise caused by radiation dose on orbit. The hardware design and algorithms are validated using test images of the night sky. The application of the stellar gyroscope as part of a CubeSat attitude determination and control system is described. The stellar gyroscope is used to augment a MEMS gyroscope attitude propagation algorithm to minimize drift in the absence of an absolute attitude sensor. The stellar gyroscope is a technology demonstration experiment on KySat-2, a 1-Unit CubeSat being developed in Kentucky that is in line to launch with the NASA ELaNa CubeSat Launch Initiative. It has also been adopted by industry as a sensor for CubeSat Attitude Determination and Control Systems (ADCS).

Markov processes have been widely studied and used for modeling problems. A Markov process has two main components (i.e., an evolution law and an initial distribution). Markov processes are not suitable for modeling some problems, for example, the problem of predicting a trajectory with a known destination. Such a problem has three main components: an origin, an evolution law, and a destination. The conditionally Markov (CM) process is a powerful mathematical tool for generalizing the Markov process. One class of CM processes, called $CM_L$, fits the above components of trajectories with a destination. The CM process combines the Markov property and conditioning. The CM process has various classes that are more general and powerful than the Markov process, are useful for modeling various problems, and possess many Markov-like attractive properties. Reciprocal processes were introduced in connection to a problem in quantum mechanics and have been studied for years. But the existing viewpoint for studying reciprocal processes is not revealing and may lead to complicated results which are not necessarily easy to apply. We define and study various classes of Gaussian CM sequences, obtain their models and characterizations, study their relationships, demonstrate their applications, and provide general guidelines for applying Gaussian CM sequences. We develop various results about Gaussian CM sequences to provide a foundation and tools for general application of Gaussian CM sequences including trajectory modeling and prediction. We initiate the CM viewpoint to study reciprocal processes, demonstrate its significance, obtain simple and easy to apply results for Gaussian reciprocal sequences, and recommend studying reciprocal processes from the CM viewpoint. For example, we present a relationship between CM and reciprocal processes that provides a foundation for studying reciprocal processes from the CM viewpoint. Then, we obtain a model for nonsingular Gaussian reciprocal sequences with white dynamic noise, which is easy to apply. Also, this model is extended to the case of singular sequences and its application is demonstrated. A model for singular sequences has not been possible for years based on the existing viewpoint for studying reciprocal processes. This demonstrates the significance of studying reciprocal processes from the CM viewpoint.

Biomimetic flapping-wing vehicles have attracted recent interest because of their numerous potential military and civilian applications. In this dissertation is described the design of a multi-agent adaptive controller for such a vehicle. This controller is responsible for estimating the vehicle pose (position and orientation) and then generating four parameters needed for split-cycle control of wing movements to correct pose errors. These parameters are produced via a subsumption architecture rule base. The control strategy is fault tolerant. Using an online learning process, an agent continuously monitors the vehicle's behavior and initiates diagnostics if the behavior has degraded. This agent can then autonomously adapt the rule base if necessary. Each rule base is constructed using a combination of extrinsic and intrinsic evolution. Details of the vehicle, the multi-agent system architecture, agent task scheduling, rule base design, and vehicle control are provided.

This study explores the variable speed operation and shift response of a prototype of a two speed single path CVT rotorcraft driveline system. Here a Comprehensive Variable Speed Rotorcraft Propulsion system Modeling (CVSRPM) tool is developed and utilized to simulate the drive system dynamics in steady forward speed condition. This investigation attempts to build upon previous variable speed rotorcraft propulsion studies by: 1) Including fully nonlinear first principles based transient gas-turbine engine model 2) Including shaft flexibility 3) Incorporating a basic flight dynamics model to account for interactions with the flight control system. Through exploring the interactions between the various subsystems, this analysis provides important insight into the continuing development of variable speed rotorcraft propulsion systems.