Spelling suggestions: "subject:"tet zero energy building"" "subject:"beet zero energy building""
1 |
Investigating How Energy Use Patterns Shape Indoor Nanoaerosol Dynamics in a Net-Zero Energy HouseJinglin Jiang (5930687) 16 January 2019 (has links)
<p>Research on net-zero energy buildings (NZEBs) has been
largely centered around improving building energy performance, while little
attention has been given to indoor air quality. A critically important class of
indoor air pollutants are nanoaerosols – airborne particulate matter smaller
than 100 nm in size. Nanoaerosols
penetrate deep into the human respiratory system and are associated with
deleterious toxicological and human health outcomes. An important step towards
improving indoor air quality in NZEBs is understanding how occupants, their
activities, and building systems affect the emissions and fate of nanoaerosols. New developments in smart energy monitoring
systems and smart thermostats offer a unique opportunity to track occupant
activity patterns and the operational status of residential HVAC systems. In this study, we conducted a one-month field
campaign in an occupied residential NZEB, the Purdue ReNEWW House, to explore
how energy use profiles and smart thermostat data can be used to characterize
indoor nanoaerosol dynamics. A Scanning Mobility Particle Sizer and Optical
Particle Sizer were used to measure indoor aerosol concentrations and size
distributions from 10 to 10,000 nm. AC
current sensors were used to monitor electricity consumption of kitchen
appliances (cooktop, oven, toaster, microwave, kitchen hood), the air handling
unit (AHU), and the energy recovery ventilator (ERV). Two Ecobee smart thermostats informed the
fractional amount of supply airflow directed to the basement and main floor. The nanoaerosol concentrations and energy use
profiles were integrated with an aerosol physics-based material balance model to
quantify nanoaerosol source and loss processes.
Cooking activities were found to dominate the emissions of indoor nanoaerosols,
often elevating indoor nanoaerosol concentrations beyond 10<sup>4</sup> cm<sup>-3</sup>. The emission rates for different
cooking appliances varied from 10<sup>11</sup> h<sup>-1</sup> to 10<sup>14</sup>
h<sup>-1</sup>. Loss rates were found to be significantly different between AHU/ERV
off and on conditions, with median loss rates of 1.43 h<sup>-1</sup> to 3.68 h<sup>-1</sup>, respectively. Probability density
functions of the source and loss rates for different scenarios will be used in
Monte Carlo simulations to predict indoor nanoaerosol concentrations in NZEBs using
only energy consumption and smart thermostat data.</p>
|
2 |
The social construction of performance-based designPowell, Ashleigh Boerder 24 April 2013 (has links)
Construction and operation of commercial and residential buildings in the United States have been identified as the single largest sector of energy consumption and contributor to greenhouse gas emissions. Subsequently, buildings must be a primary target for reductions. From short-term incentives, to long-term milestones, building energy efficiency, specifically net zero energy buildings, have emerged as a significant and unprecedented objective for a variety of public and private organizations in the United States. Altering the practices of the building culture requires not only technological innovation, but also an understanding of how practitioners within the building culture see their role in transforming it. Consequently my research seeks to understand how building industry professionals comprehend their capacity to influence the cultural boundaries of their profession in order to account for and mitigate the impacts of energy and emissions in the built environment. Ultimately, this study is an investigation into the social construction of technological change.
The AIA+2030 Professional Series offered by the Denver Chapter of the American Institute of Architects has served as the single case study for this investigation. By limiting local conditions to the Denver-based Series and defining advocates as the self-selected group of participants, I’ve narrowed this analysis to reflect a workable microcosm of practitioners who are committed to the investigation and integration of net zero energy design, construction, and building operation practices. In order to substantiate this empirical analysis, I employed a triangulated series of data collection and interpretation consisting of: participant observation, interviews, and a survey. Data analysis involved an iterative process of coding and categorizing the primary key words and themes that emerged throughout my investigation.
Each of the perspectives offered during this investigation indicate that architects who are advocates of net zero energy building design perceive that consequential opportunities for fundamental change exist within the social and cultural facets of the building culture. Ultimately, by preferencing social and cultural activism over technological manipulation, these advocates have corroborated the notion that technological change is fundamentally rooted in social change. / text
|
3 |
Renewable Energy Investment Planning and Policy DesignGhalebani, Alireza 08 April 2016 (has links)
In this dissertation, we leverage predictive and prescriptive analytics to develop decision support systems to promote the use of renewable energy in society. Since electricity from renewable energy sources is still relatively expensive, there are variety of financial incentive programs available in different regions. Our research focuses on financial incentive programs and tackles two main problem: 1) how to optimally design and control hybrid renewable energy systems for residential and commercial buildings given the capacity based and performance based incentives, and 2) how to develop a model-based system for policy makers for designing optimal financial incentive programs to promote investment in net zero energy (NZE) buildings.
In order to customize optimal investment and operational plans for buildings, we developed a mixed integer program (MIP). The optimization model considers the load profile and specifications of the buildings, local weather data, technology specifications and pricing, electricity tariff, and most importantly, the available financial incentives to assess the financial viability of investment in renewable energy. It is shown how the MIP model can be used in developing customized incentive policy designs and controls for renewable energy system.
|
4 |
Investigation of different ventilation profiles to avoid stratification in Nearly Zero Energy BuildingsVarela Santana, Alazne Irene January 2023 (has links)
This research paper examines possible solutions for the problems that warm air heating is suffering in Nearly Zero Energy Buildings. These NZEBs are passive houses constructed to have high energy efficiency where the quantity of power used is equal to the power created annually, produced locally or in the surroundings by renewable energy sources. The problem is that this type of houses are facing problems when it comes to the heating system, where temperature of air in the ceiling is greater than on the floor, so temperature stratification happens and thermal comfort is not reached in the occupied zone. For this reason, this study is carried out and tries to find optimal solutions for warm air heating. To accomplish the investigation, an experimental study has been performed using water as the working fluid in a small-scale model. Here, paddles moved horizontally located in the center of the model at the inversion level have been used to simulate the effect that the diffuser does in the air when heating. Measurements with different paddles were made to analyze the importance of the size in the mixing and one of the paddles has been positioned on a side, next to the wall, to analyze the influence of an obstacle. It has been concluded that the area of the paddle does not have a great influence on the mixing rate, but the height of it. Also, the obstacle introduced when having the paddle next to the wall showed good results in the mixing rate. Finally, the potential energy of the water tank has not suffered any change at the surface but it has decreased at the bottom for all of the paddles, so it has been wound up that the area does not have influence on the change of potential energy. All in all, two main conclusions have been reached. On the one hand, the configuration of the air inlet diffuser significantly influences the rate of mixing. Specifically, a greater vertical size of the diffuser leads to a higher speed of mixing attainment. On the other hand, it is recommended to position the diffuser towards an obstacle, such as the adjacent wall, in order to induce turbulence. As a consequence, these findings can be investigated later in a real scale model using air as the working fluid. In this way, a solution for problems of warm air heating could be found.
|
5 |
Energy performance evaluation and economic analysis of variable refrigerant flow systemsKim, Dongsu 09 August 2019 (has links)
This study evaluates energy performance and economic analysis of variable refrigerant flow (VRF) systems in U.S. climate locations using widelyepted whole building energy modeling software, EnergyPlus. VRF systems are known for their high energy performance and thus can improve energy efficiency in buildings. To evaluate the energy performance of a VRF system, energy simulation modeling and calibration of a VRF heat pump (HP) type system is performed using the EnergyPlus program based on measured data collected from an experimental facility at Oak Ridge National Laboratory (ORNL). In the calibration procedures, the energy simulation model is calibrated, according to the ASHRAE Guideline 14-2014, under cooling and heating seasons. After a proper calibration of the simulation model, the VRF HP system is placed in U.S. climate locations to evaluate the performance variations in different weather conditions. An office prototype building model, developed by the U.S. Department of Energy (DOE), is used with the VRF HP system in this study. This study also considers net-zero energy building (NZEB) design of VRF systems with a distributed photovoltaic (PV) system. The NZEB concept has been considered as one of the remedies to reduce electric energy usages and achieve high energy efficiency in buildings. Both the VRF HP and VRF heat recovery (HR) system types are considered in the NZEB design, and a solar PV system is utilized to enable NZEB balances in U.S. climate locations by assuming that net-metering available within the electrical grid-level. In addition, this study conducts life cycle cost analysis (LCCA) of NZEBs with VRF HP and HR systems. LCCA provides present values at a given study period, discounted payback period, and net-savings between VRF HP and HR systems in U.S. climate locations. Preliminary results indicate that the simulated VRF HP system can reasonably predict the energy performance of the actual VRF HP system and reduce between 15-45% for HVAC site energy uses when compared to a VAV system in U.S. climate locations. The VRF HR system can be used to lower building energy demand and thus achieve NZEB performance effectively in some hot and mild U.S. climate locations.
|
6 |
A simulation-optimization method for economic efficient design of net zero energy buildingsDillon, Krystal Renee 22 May 2014 (has links)
Buildings have a significant impact on energy usage and the environment. Much of the research in architectural sustainability has centered on economically advanced countries because they consume the most energy and have the most resources. However, sustainable architecture is important in developing countries, where the energy consumption of the building sector is increasing significantly. Currently, developing countries struggle with vaccine storage because vaccines are typically warehoused in old buildings that are poorly designed and wasteful of energy. This thesis created and studied a decision support tool that can be used to aid in the design of economically feasible Net Zero Energy vaccine warehouses for the developing world. The decision support tool used a simulation-optimization approach to combine an optimization technique with two simulation softwares in order to determine the cost-optimal design solution. To test its effectiveness, a new national vaccine storage facility located in Tunis, Tunisia was used. Nine building parameters were investigated to see which have the most significant effect on the annual energy usage and initial construction cost of the building. First, tests were conducted for two construction techniques, five different climates in the developing world, and three photovoltaic system prices to gain insight on the design space of the optimal solution. The results showed the difference between an economically efficient and economically inefficient Net Zero Energy building and the results were used to provide generalized climatic recommendations for all the building parameters studied. The final test showed the benefits of combining two optimization techniques, a design of experiments and a genetic algorithm, to form a two-step process to aid in the building design in the early stages and final stages of the design process. The proposed decision support tool can efficiently and effectively aid in the design of an economically feasible Net Zero Energy vaccine warehouse for the developing world.
|
7 |
A Methodology to Sequentially Identify Cost Effective Energy Efficiency Measures: Application to Net Zero School BuildingsJanuary 2016 (has links)
abstract: Schools all around the country are improving the performance of their buildings by adopting high performance design principles. Higher levels of energy efficiency can pave the way for K-12 Schools to achieve net zero energy (NZE) conditions, a state where the energy generated by on-site renewable sources are sufficient to meet the cumulative annual energy demands of the facility. A key capability for the proliferation of Net Zero Energy Buildings (NZEB) is the need for a design methodology that identifies the optimum mix of energy efficient design features to be incorporated into the building. The design methodology should take into account the interaction effects of various energy efficiency measures as well as their associated costs so that life cycle cost can be minimized for the entire life span of the building.
This research aims at developing such a methodology for generating cost effective net zero energy solutions for school buildings. The Department of Energy (DOE) prototype primary school, meant to serve as the starting baseline, was modeled in the building energy simulation software eQUEST and made compliant with the requirement of ASHRAE 90.1-2007. Commonly used efficiency measures, for which credible initial cost and maintenance data were available, were selected as the parametric design set. An initial sensitivity analysis was conducted by using the Morris Method to rank the efficiency measures in terms of their importance and interaction strengths. A sequential search technique was adopted to search the solution space and identify combinations that lie near the Pareto-optimal front; this allowed various minimum cost design solutions to be identified corresponding to different energy savings levels.
Based on the results of this study, it was found that the cost optimal combination of measures over the 30 year analysis span resulted in an annual energy cost reduction of 47%, while net zero site energy conditions were achieved by the addition of a 435 kW photovoltaic generation system that covered 73% of the roof area. The simple payback period for the additional technology required to achieve NZE conditions was calculated to be 26.3 years and carried a 37.4% premium over the initial building construction cost. The study identifies future work in how to automate this computationally conservative search technique so that it can provide practical feedback to the building designer during all stages of the design process. / Dissertation/Thesis / Masters Thesis Built Environment 2016
|
8 |
The net zero-energy home: Precedent and catalyst for local performance-based architectureJanuary 2014 (has links)
abstract: The building sector is responsible for consuming the largest proportional share of global material and energy resources. Some observers assert that buildings are the problem and the solution to climate change. It appears that in the United States a coherent national energy policy to encourage rapid building performance improvements is not imminent. In this environment, where many climate and ecological scientists believe we are running out of time to reverse the effects of anthropogenic climate change, a local grass-roots effort to create demonstration net zero-energy buildings (ZEB) appears necessary. This paper documents the process of designing a ZEB in a community with no existing documented ZEB precedent. The project will establish a framework for collecting design, performance, and financial data for use by architects, building scientists, and the community at large. This type of information may prove critical in order to foster a near-term local demand for net zero-energy buildings. / Dissertation/Thesis / Appendix M - Simulation and Weather Data / M.S. Built Environment 2014
|
9 |
Conception optimale de bâtiments à énergie nette nulle sous différents climats / Optimal design of net zero energy buildings under different climatesHarkouss, Fatima 28 June 2018 (has links)
La conception des bâtiments à consommation énergétique nette zéro (BCENN) a été introduite pour limiter la consommation d'énergie et les émissions polluantes dans les bâtiments. Le défi dans la conception de BCENN est de trouver la meilleure combinaison de stratégies de conception qui feront face aux problèmes de performance énergétique d'un bâtiment particulier. Cette thèse présente une méthodologie pour l'optimisation multicritères basée sur la simulation des BCENN. La méthodologie proposée est un outil utile pour améliorer la conception des BCENN et faciliter la prise de décision dans les premières phases de la conception des bâtiments. L’amélioration des bâtiments en matière d'efficacité énergétique nécessite une optimisation des paramètres passifs. Une étude complète sur la conception passive optimale pour les bâtiments résidentiels est présentée. Le confort thermique adaptatif des occupants est également amélioré en mettant en œuvre les stratégies de refroidissement passif appropriées telles que les dispositifs d’occultation et la ventilation naturelle. Les caractéristiques des systèmes de conditionnement de l’air et de production d’énergie mis en œuvre dans les BCENN doivent être sélectionnées avec soin pour garantir l'objectif de performance prévu. Dans cette thèse, six ensembles de systèmes énergétiques sont comparés et optimisés, pour la conception de BCENN dans des climats représentatifs choisis, à savoir Indore (besoin de froid dominant), Tromso (besoin de chaud dominant) et Beijing (climat mixte). / The conception of net zero energy buildings (NZEB) has been introduced to limit energy consumption, global warming potentials, and pollution emissions in buildings. The challenge in NZEB design is to find the best combination of design strategies that will enhance the energy performance of a particular building. The aim of this thesis is to develop an understanding of NZEBs design concepts. Besides, it aims to assist NZEB designers to select the suitable design options of passive and RE systems based on a systemic evaluation in different climates. This thesis presents a methodology for the simulation-based multi-criteria optimization of NZEBs. The methodology is applied to investigate the cost-effectiveness potential for optimizing the design of NZEBs in different case studies taken as diverse climatic zones. The proposed methodology is a useful tool to enhance NZEBs design and to facilitate decision making in early phases of building design. A comprehensive study on optimal passive design for residential buildings is presented. The occupants’ adaptive thermal comfort is also improved by implementing the appropriate passive cooling strategies such as blinds and natural ventilation. The configurations and capacities of the implemented RE systems in NZEBs must be appropriately selected to ensure the intended performance objective. In the thesis, investigation, optimization and comparison of six RE solution sets for designing NZEBs is carried out in three typical climates: Indore (cooling dominant), Tromso (heating dominant) and Beijing (mixed climate).
|
Page generated in 0.1421 seconds