No description available.

No description available.

Master’s thesis is dedicated to the issue of network element. In the first part are described technological aspects as the internal structure of network elements and control mechanisms that provide differentiaton of services and support their quality requirements. In the first chapter are listed control mechanisms from most simple like FIFO to the more sophisticated like CBWFQ. Active queue managements are not missing and they are described in the section Riadiaci člen. Significant role in the differentiation of services have processes marking and pakets classification. The second chapter is devoted most promising standard DiffServ. Contains section devoted to architecture, paket marking, code point DSCP and the final part is devoted to the types of per-hop behavior and it is expedited forwarding EF and technique assured forwarding AF. The third chapter gives an overview common models of neural networks, their properties and assess their suitability for deployment in network elements. The routher design itself and its structure in programming environment Matlab/Simulink is the subject of the fourth chapter. Except used bloks from Simulink library is described their setting and function in the wiring. Consequently results are reviewied and conclusions drawn.

[pt] O objetivo desta dissertação consiste no desenvolvimento e na realização de um analisador de redes e elementos de redes na taxa de 1 Gbps. A tecnologia de lógica programável (FPGA) é utilizada através de uma placa de desenvolvimento ativada por ferramentas computacionais dedicadas a esta aplicação. O módulo realizado é utilizado para caracterizar uma rede e alguns elementos de rede em função da taxa máxima de transmissão de pacotes, número de pacotes perdidos e retardo. Uma comparação entre os resultados fornecidos pelo módulo desenvolvido e um equipamento comercial é apresentada e comentada. Finalmente, as principais vantagens da proposta desta dissertação são destacadas. / [en] The main purpose of this dissertation is the development and realization of a Gigabit Ethernet network element analyzer. The FPGA technology is employed through a development board, activated by dedicated software tools. The prototype realized is employed to describe a network and network elements by maximum transmission capacity, frame loss and delay. A comparative analysis between this prototype and a commercial equipment is performed. Finally, the main advantages of this dissertation will be highlighted.

The objective of this master’s thesis is monitoring and management of computer networks via SNMP protocol and its practical application. The main part describes working with SNMPc program in an experimental network through implementation of its parts into the network and configuration of SNMP agents on routers, switch and end station. This thesis includes the results of traffic testing, disconnected links, effects of traffic load on QoS parameters, making longterm statistics, baselines and alarms. The thesis also includes parametres obtained with SNMP protocol from network nodes and end station.

Magister Scientiae - MSc / Telecommunication companies, service providers and large companies are now adapting converged multi-service Next Generation Networks (NGNs). Network management is shifting from managing Network Elements (NE) to managing services. This paradigm shift coincides with the rapid development of Quality of Service (QoS) protocols for IP networks. NEs and services are managed with Policy Based Network Management (PBNM) which is most concerned with managing services that require QoS using the Common Open Policy Service (COPS) Protocol. These services include Voice over IP (VoIP), video conferencing and video streaming. It follows that legacy NEs without support for QoS need to be replaced and/or excluded from the network. However, since most of these services run over IP, and legacy NEs easily supports IP, it may be unnecessary to throw away legacy NEs if it can be made to fit within a PBNM approach. Our approach enables an existing PBNM system to include legacy NEs in its management paradigm. The Proxy-Policy Enforcement Point (P-PEP) and Queuing Policy Enforcement Point (Q-PEP) can enforce some degree of traffic shaping on a gateway to the legacy portion of the network. The P-PEP utilises firewall techniques using the common legacy and contemporary NE management protocol Simple Network Management Protocol (SNMP) while the Q-PEP uses queuing techniques in the form Class Based Queuing (CBQ) and Random Early Discard (RED) for traffic control. / South Africa

The thesis deals with the use of neuronal networks for the control of telecommunication network elements. The aim of the thesis is to create a simulation model of network element with switching array with central memory, in which the optimization control switching array is solved by means of the Hopfield neural network. All source code is created in integrated environment MATLAB with the use of Neural Network Toolbox.

The objective of this master’s thesis is monitoring and management of computer networks via SNMP protocol and its practical application. The main part describes working with SNMPc program in an experimental network through implementation of its parts into the network and configuration of SNMP agents on routers, switch and end station. This thesis includes the results of traffic testing, disconnected links, effects of traffic load on QoS parameters, making longterm statistics, baselines and alarms. The thesis also includes parametres obtained with SNMP protocol from network nodes and end station.

The diploma thesis deal with finding and testing neural networks, whose characteristics and parameters suitable for the active management of network element. Solves optimization task priority switching of data units from input to output. Work is focused largely on the use of Hopfield and Kohonen networks and their optimization. Result of this work are two models. The first theory is solved in Matlab, where each comparing the theoretical results of neural networks. The second model is a realistic model of the active element designed in Simulink