Object of presented dissertation is proposition of apartment building. Apartment building is based on wood technology with two stages without cellar and with flat roof. Block of flats is designed with 8 flats. Some of them with big terrace. Object is situated in Olomouc, Czech Republic.

The diploma thesis deals with a work out project documentation of multifunctional building. The new building is located in the cadastral area of Moravské Budějovice. The object will have two uses. The first part of the building will be used as flats and the second part will be used as office space for design company with facilities. There are three floors in the residental part where seven flats are proposed (4x 3+1, 2x 2+kk and a barrier free flat 2+1). The other part of the object has two floors with offices. Their area is about 260 m2. There are 23 parking lots for cars in the building. The roof is designed as a vegetation flat roof. The object is based on concrete foundation strips. The vertical load-bearing constructions are made of ceramics bricks, the ceillings and stairs are made of reinforced concrete.

The aim of the thesis is solving the new building of the Faculty of Fine Arts in Brno. The studied area is located on the borders of the city of Brno-Center and Brno-Žabovřesky. Define the plot street Veveří, Bulínova, Academická, Hrnčířská and Šumavská. Žabovřesky. Define the plot street Veveří, Bulínová, Academic, Pottery and Šumavská. The proposal involves two universities - the Faculty of Arts and Faculty of Forensic Engineering. The proposal builds on a new urban plan for the city of Brno, and also reflects the design of the new underground tram Diameter. The building complex is designed as a whole. The buildings of these schools have certain common facilities, such as a library, cloakroom, dining room, hall, utility room. The proposal builds on the competition program at the Academic square in Brno. Parking is solved as an underground garage. Outside parking spaces for both faculties be reckoned with parking spaces for the City, and to be a substitute for the parking areas located on the currently designed plot. The proposed solution allows to stage construction, where the first stage will be built Faculty of Forensic Engineering, common areas, all the parking spaces and the second stage will be built Faculty of Fine Arts.

The subject of this thesis is six-storey concret basement multifunctional objekt. The building plot is located in Bratislava. The multifunctional object is designed with the view of the location. The Object will be used for trade and services and for living of a families. The object is in the shape of a rectangle. The main entrance and the driveway to the Object is at 1st ground floor level.The vertical supporting structures are formed by concrete pillars and walls with Ytong blocks that are insulated. The ceiling structure is made of concrete monolithic panels. The multifunctional object covers a pitched roof. The project was prepared by a computer program called Archicad.

The diploma thesis deals with the design of a new building of a senior house in the village Sazovice. The new building is situated on flat terrain in the center of the village. The building has three floors and one underground. The purpose is to build a building for seniors' stay. Part of the building consists of technical, operational and storage premises. The remaining space is used for housing. There are two main entrances to the building from the west side, where a car park and an access road is. The roofing is designed with a single-layer flat roof loaded with gravel. Part of the roof construction is designed as a vegetation with a terrace.

The diploma thesis deals with the proposal of a new guesthouse with a restaurant. The building is located in a slightly sloping terrain in the cadastral area of the village Vlasatice Brno-venkov in the South Moravian Region in the Czech Republic. The ground-plan shape of the building is mostly rectangular with folded facade parts. It is a partially basement building, to a lesser extent, recessed below ground level with three above-ground floors. The pension has a total of 22 rooms with a total capacity of 46 persons for short-term accommodation. Four rooms on the first floor are designed as wheelchair accessible. For the proper operation of the pension there is a reception on the first floor and an office with the appropriate meeting room on the second floor. One-storey part of the building consists of a restaurant with a capacity of 76 persons, which is designed as a frame skeleton with intensive vegetation single-skin flat roof. The preparation and meals and service of the restaurant is ensured by the kitchen together with its operations and respective warehouses located on the first floor. The basement is used primarily for the operation of the guesthouse, which is located air-conditioning engine room, utility room, workshop or warehouse. The building is for the most part bricked and the peripheral, internal bearing or partition walls are made of polished ceramic blocks porotherm. External walls are insulated with contact insulation system ETICS of gray EPS polystyrene. The glazed Schüco façade is used as the shell of the skeleton structure. The construction of the ceiling is composed of filigree ceiling panels and a singlelayer flat roof with a slope of 3% is used for roofing the building. The thesis contains project documentation for the realization of the construction.

The aim of the Diploma thesis is elaboration of design documentation for execution of an multifunkcional building.It is a building with four above ground floors and one partly under-ground floor. In the underground floor, individual garages are designed. The entrance is on the first floor, where there are also business premises. Office space is located on the second floor, and flats are placed on the third and fourth floors. The roof above the 4th floor is designed as flat roof. The underground part of the building and some other structures are designed from concrete. The other load-bearing masonry is made of ceramic blocks. The partitions are made of plasterboard or ceramic fittings. The shafts are also made of plasterboard. The ETICS system is used on the facade. The ceiling structures are monolithic reinforced concrete slabs. The roof is made as an extensive green roof.

This thesis solves the new building of commercial building with flats in vacant space in Prague street in Hořovice. This building is with the cellar in a part of object and it has four floors. Commercial building has rectangular ground plan and it is covered with flat roof. The facade will be furnished with contact thermally insulated system with improved plaster and cladding tape. The object is proposed to be made with brick from block. Ceiling is made from iron-concrete ceiling panels. In the basement there are cellar boxes for the each apartments, store room and boiler room. In the ground floor there are four shops which are directly approachable from the outside. Every shops have own store room, office and restroom. There are also situated pram room for apartments and two stores for household rubbish. The first floor is constructed for offices where two companies can be located. In the second floor there are six apartments. Two of them can be adapted for the person with reduced mobility. The third floor is identical with the second floor.

Diploma thesis adresses the the project documentation the new building of Sports club in Polička city. It’s an object designed for sports activities to the public with a café and sports shop. The building consists of two floors and one basement floor. The part of object with one floor is for refreshing vitsitors. A basement part with a two floor is used for sports activities. The building is covered with a flat roof and mounted on flat terrain. The total maximum capacity is 104 people.

New-building of leisure center. The building contains two stories, without basement. Structural system of building is created by Porotherm and supplemented by reinforced concrete columns. There are large entrance hall, canteen, lecture and exercise rooms in the ground level. Accommodation rooms, private apartment, laundry room and building manager’s apartment are situated in the second level of building. Roofing of the two-storey building is created by arched truss. The single-storey building is roofed by green roof.