Spelling suggestions: "subject:"bickel catalysts."" "subject:"dickel catalysts.""
1 |
Nickel (II) bromide bis-(triphenyl-phosphine)/lithium aluminum hydride: a versatile desulfurization reagent.January 1988 (has links)
Kin Man Ho. / Thesis (M.Ph.)--Chinese University of Hong Kong, 1988. / Bibliography: leaves 61-65.
|
2 |
TPD/TPR study of CO and H[subscript]2 interactions with supported nickel catalystsGarner, Gary Dean 12 1900 (has links)
No description available.
|
3 |
Catalytic polymerization of butadiene by some n3-allynickel (II) complexesNavarre, Alexandre January 1976 (has links)
No description available.
|
4 |
Synthesis, characterization and application of supported nickel catalysts for the hydrogenation of octanal.Mthalane, Samkelo. January 2010 (has links)
Three nickel based catalysts were prepared by the impregnation method (Ni/Al2O3 and Ni/SiO2)
and co-precipitation method (Ni/ZnO). The catalysts were characterized by XRD, ICP-OES,
BET-surface area and pore volume, SEM, TEM, TPR, NH3-TPD and in-situ XRD reduction. The
catalytic activity of the catalysts in the liquid phase hydrogenation of octanal was studied at 110
°C and 50 bar. The effect of water as a co-feed on the catalytic activity of the catalysts was also
investigated.
Generally, all the catalysts were crystalline materials. The Ni/Al2O3 and Ni/ZnO catalysts
contained NiO species that were “hard” to reduce, whereas the Ni/SiO2 catalyst was the easiest to
reduce, according to the TPR and in-situ XRD reduction studies. The total acidity (μmol
NH3/gcatal.) of the catalysts decreased in the following sequence: Ni/Al2O3 > Ni/ZnO > Ni/SiO2.
The Ni/SiO2 and Ni/ZnO catalysts had intermediate and strong acidic sites, respectively, while
the Ni/Al2O3 catalyst had weak-intermediate and strong acidic sites. The BET-surface area and
pore volume of the catalysts decreased in the following order: Ni/Al2O3 > Ni/SiO2 > Ni/ZnO.
The conversion of octanal for all the catalysts was ca. 90 %. The Ni/SiO2 and Ni/ZnO catalysts
had octanol selectivities of over 99 % and the Ni/Al2O3 catalyst had 95 % octanol selectivity. The
alumina support was observed to catalyze the formation of heavy products (C24 acetal, dioctyl
ether and 2-hexyl-1-decanol).
The water present in the feed poisoned the alumina sites that were responsible for the formation
of heavy products thereby, making the catalyst more selective (> 99 %) to octanol. For the
Ni/SiO2 catalyst the presence of water in the feed caused the octanal conversion to decrease with
time-on-stream. The deactivation of the Ni/SiO2 catalyst, when water was used as a co-feed, was
caused by the mechanical failure of the catalyst and also by the leaching of nickel metal during
the reaction. / Thesis (M.Sc.)--University of KwaZulu-Natal, Durban, 2010.
|
5 |
Synthesis of 5-halo-3-methoxy-salicylaldiminato nickel catalysts and their use for ethylene polymerization in organic and aqueous media /Kolhatkar, Nikhil Avinash. January 2009 (has links)
Thesis (M.S.)--Rochester Institute of Technology, 2009. / Typescript. Includes bibliographical references (leaves 99-101).
|
6 |
Arsenic poisoning of nickel catalystsYe, Hui 01 January 1992 (has links)
No description available.
|
7 |
Kinetics of the dissolution of copper in aqueous aliphatic amines, and catalytic reduction of nickel ion by molecular hydrogenSircar, Sisir Coomar January 1959 (has links)
Kinetics of the Dissolution of Copper in Aqueous Aliphatic Amines.
An investigation was made of the dissolution of copper metal in aqueous solutions of methyl, ethyl and n-butyl amine and ammonia, as well as in solutions of their aminium and ammonium ions, under oxygen pressure. Study of the kinetics of the dissolution was carried out over a wide range of concentrations. It was observed that there are two regions of oxygen pressure dependency of the rate. The range of oxygen pressure, where rate is independent of oxygen pressure, was investigated in detail.
The rate process has been established to obey the relation
R = [formula omitted] [k₂(A) + k₃ (AH⁻⁺)]
for all the systems studied.
A mechanism for the dissolution reaction has been proposed.
Catalytic Reduction of Nickel Ion by Molecular Hydrogen.
The rate of precipitation of nickel from salt solution by molecular hydrogen in the presence of catalyst has been investigated
over a wide range of concentrations. The variables studied are concentration of nickel, hydrogen pressure, amount of catalyst, concentration of- hydrogen ion and temperature. The rate of reduction is found to obey an equation of the form:
[formula omitted] = -k₁[S][PH₂]½[Ni⁺⁺] + k₂[S][H⁺]
The activation energy is found to be 25±2 kcal/mol.
The equilibrium constant k for the reaction Ni⁺⁺ H2 Ni° + H₂ ⇌ Nº + 2 H⁺ is found to be 4.65 x 10⁻⁶ atm⁻¹ at 140°C. / Applied Science, Faculty of / Mining Engineering, Keevil Institute of / Graduate
|
8 |
Catalytic polymerization of butadiene by some n3-allynickel (II) complexesNavarre, Alexandre January 1976 (has links)
No description available.
|
9 |
Deactivation of nickel methanation catalysts induced by the decomposition of iron carbonylShen, Wei-Ming. January 1982 (has links)
Thesis (Ph. D.)--University of Wisconsin--Madison, 1982. / Typescript. Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 232-249).
|
10 |
Parametric study of the partial oxidation of propane over Ni and Pt based catalystsMukka, Mayuri. January 2010 (has links)
Thesis (M.S.)--West Virginia University, 2010. / Title from document title page. Document formatted into pages; contains xiii, 130 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 125-129).
|
Page generated in 0.0587 seconds