The microelectronics industry requires continuous advances due to ever-evolving technology and the corresponding need for higher density substrates with smaller features. Specifically, new dielectric materials with enhanced electrical properties are needed. At the same time, adhesion must be maintained in order to preserve package reliability and mechanical performance. As a result, this research investigates the use of thin glass sheets as an alternative substrate material as it offers a number of advantages including coefficient of thermal expansion similar to silicon, good dielectric properties and optical transparency to assist in the alignment of buried features. As part of this project it was necessary to deposit metallic coatings onto the glass sheets to create electrical tracks, pads and microvias. In order to meet these requirements, the metallisation of both smooth as received glass surfaces and surfaces roughened by laser machining using electroless copper and nickel deposition were investigated. This study resulted in a number of important conclusions about the roles of chemical bonding and mechanical anchoring in both the adhesion and catalyst adsorption, that are key factors in the electroless metallisation process.....

The aim of this diploma thesis was summary of all steps and knowledge necessary to deposition of quality Ni-P coatings deposited on wrought magnesium alloys AZ31 and AZ61. There is the treatise about wrought magnesium alloys AZ31 and AZ61. Thesis includes its phase composition in the theoretical part. There are given its possible processing methods too. Next, there is desribed the mechanism of deposition of Ni-P coatings, components required to electroless deposition and factors affecting the quality and properties of these coatings. The theoretical part is ended by serie of reviews. Authors of these reviews deal with pretreatment of substrates, preparation, characterization and measuring of mechanical, structure and corrosion properties of deposited coatings. The optimalization of pretreatment, parametres and composition of nickel bath suitable for magnesium alloys is described in experimental part. The microstructure, present interlayer between substrate and Ni-P coating and chemical composition of deposited coatings was observed and measured by optical and electron microscopy. The mechanical characterization of Ni-P coatings was performed by microhardness tester.

El conocimiento de las características interfaciales es de suma importancia para poder desarrollar materiales que sean capaces de dar lugar a reacciones electrocatalíticas eficientes. Por esta razón, en esta tesis se muestran diferentes estudios interfaciales sobre superficies monocristalinas de platino y cobre en diferentes electrolitos. Además se estudian las características de la interfase electrodoldisolución con superficies de platino modificadas con adátomos de hierro, cobalto y níquel. Para ello, se han empleado las técnicas de voltametría cíclica, espectroscopía infrarroja con transformada de Fourier, desplazamiento de carga con CO y salto de temperatura inducido por láser. Los resultados muestran cómo varía el campo eléctrico interfacial disminuye al aumentar el recubrimiento de hierro y níquel en la superficie de platino. Este efecto tiene un gran impacto en la reacción de evolución de hidrógeno, ya que la mejora electrocatalítica de esta reacción está relacionada con la energía de reorganización de las moléculas de agua, la cual, depende de la fortaleza del campo eléctrico interfacial. Los estudios realizados en medio alcalino para las diferentes superficies de cobre y platino sin modificar muestran una correlación entre el potencial de máxima entropía y las funciones de trabajo para cada una de las diferentes orientaciones atómicas superficiales. Por otro lado, debido a la aplicabilidad de las nanopartículas en los sistemas reales de conversión de energía, se realizaron experimentos de sincrotrón empleando la técnica de Bragg coherent difraction imaging con el objetivo de estudiar el deterioro de las nanopartículas en condiciones operando.