Indiana University-Purdue University Indianapolis (IUPUI) / Gas-phase ion/ion covalent modification was coupled to ion mobility/mass spectrometry analysis to directly correlate the structure of gaseous ubiquitin to its solution structures with selective covalent structural probes. Collision cross-section (CCS) distributions were measured prior to ion/ion reactions to ensure the ubiquitin ions were not unfolded when they were introduced to the gas phase. Ubiquitin ions were electrosprayed from aqueous and methanolic solutions yielding a range of different charge states that were analyzed by ion mobility and time-of-flight mass spectrometry. Aqueous solutions stabilizing the native state of ubiquitin generated folded ubiquitin structures with CCS values consistent with the native state. Denaturing solutions favored several families of unfolded conformations for most of the charge states evaluated. Gas-phase covalent labeling via ion/ion reactions was followed by collision-induced dissociation of the intact, labeled protein to determine which residues were labeled. Ubiquitin 5+ and 6+ electrosprayed from aqueous solutions were covalently modified preferentially at the lysine 29 and arginine 54 residues, indicating that elements of secondary structure, as well as tertiary structure, were maintained in the gas phase. On the other hand, most ubiquitin ions produced in denaturing conditions were labeled at various other lysine residues, likely due to the availability of additional sites following methanol and low pH-induced unfolding. These data support the conservation of ubiquitin structural elements in the gas phase. The research presented here provides the basis for residue-specific characterization of biomolecules in the gas phase.

The initial steps involved in the assembly of normally soluble proteins into amyloid fibrils remain unclear, yet over 20 human diseases are associated with proteins that aggregate in this manner. Protein surface modification is a potential means of mapping the interaction sites in early oligomers that precede amyloid formation. This dissertation focuses on the use of covalent labeling combined with mass spectrometry to elucidate the structural features of Cu(II)-induced β-2-microglobulin (β2m) amyloid formation. An improved covalent modification and MS-based approach for protein surface mapping has been developed to address the need for a reliable approach that ensures protein structural integrity during labeling experiments and provides readily detectable modifications. This approach involves measuring the kinetics of the modification reactions and allows any local perturbations caused by the covalent label to be readily identified and avoided. This MS-based method has been used to study human β2m, a monomeric protein that has been shown to aggregate into amyloid fibrils in dialysis patients leading to dialysis-related amyloidosis. Under conditions that lead to β2m amyloid formation, reactions of β2m with three complementary covalent labels have been used to identify the Cu(II) binding site, metal-induced conformational changes, and the oligomeric interfaces. Results confirm that Cu(II) binds to His31 and the N-terminal amine. Binding to these residues causes several structural changes in the N-terminal region and ABED β-sheet which likely enables formation of oligomeric intermediates. The covalent labeling data indicate that the pre-amyloid β2m dimer has an interface that involves the antiparallel arrangement of ABED sheets from two monomers. Moreover, our covalent labeling data allowed us to develop a model for the tetramer in which the interface is mediated by interactions between D strands of one dimer unit and the G strands of another dimer unit. Lastly, the selective covalent modification approach has been used to delineate the structural changes in β2m after interaction with Cu(II), Ni(II), and Zn(II) and their effect on its aggregation. Our covalent labeling data indicates that the unique effect of Cu(II) appears to be caused by the site at which the metal binds the protein and the conformational changes it induces.

<p>Thermodynamic stability measurements on proteins and protein-ligand complexes can offer insights not only into the fundamental properties of protein folding reactions and protein functions, but also into the development of protein-directed therapeutic agents to combat disease. Conventional calorimetric or spectroscopic approaches for measuring protein stability typically require large amounts of purified protein. This requirement has precluded their use in proteomic applications. Stability of Proteins from Rates of Oxidation (SPROX) is a recently developed mass spectrometry-based approach for proteome-wide thermodynamic stability analysis. Since the proteomic coverage of SPROX is fundamentally limited by the detection of methionine-containing peptides, the use of tryptophan-containing peptides was investigated in this dissertation. A new SPROX-like protocol was developed that measured protein folding free energies using the denaturant dependence of the rate at which globally protected tryptophan and methionine residues are modified with dimethyl (2-hydroxyl-5-nitrobenzyl) sulfonium bromide and hydrogen peroxide, respectively. This so-called Hybrid protocol was applied to proteins in yeast and MCF-7 cell lysates and achieved a ~50% increase in proteomic coverage compared to probing only methionine-containing peptides. Subsequently, the Hybrid protocol was successfully utilized to identify and quantify both known and novel protein-ligand interactions in cell lysates. The ligands under study included the well-known Hsp90 inhibitor geldanamycin and the less well-understood omeprazole sulfide that inhibits liver-stage malaria. In addition to protein-small molecule interactions, protein-protein interactions involving Puf6 were investigated using the SPROX technique in comparative thermodynamic analyses performed on wild-type and Puf6-deletion yeast strains. A total of 39 proteins were detected as Puf6 targets and 36 of these targets were previously unknown to interact with Puf6. Finally, to facilitate the SPROX/Hybrid data analysis process and minimize human errors, a Bayesian algorithm was developed for transition midpoint assignment. In summary, the work in this dissertation expanded the scope of SPROX and evaluated the use of SPROX/Hybrid protocols for characterizing protein-ligand interactions in complex biological mixtures.</p> / Dissertation

Cell surface proteins play an important role in understanding cell-cell communication, cell signaling pathways, cell division and molecular pathogenesis in various diseases. Commonly used biotinylation regents for cell surface mapping have shown some potential drawbacks such as crossing the cell membrane, difficult recovery of biotinylated proteins from streptavidin/avidin beads, interference from endogenous biotin and nonspecific nature of streptavidin. With aim to solve these problems, we introduced sulfo-N-hydroxysuccinimidyl (NHS) ester functionalized magnetic nanoparticles containing cleavable groups to label solvent exposed primary amine groups of proteins. Silica coated iron oxide magnetic nanoparticles (Fe3O4@SiO2 MNPs) were linked to NHS ester groups via a cleavable disulfide bond. Additionally, the superparamagnetic properties of Fe3O4@SiO2 MNPs facilitate efficient separation of the labeled peptides and removal of the detergent without any extra step of purification. In the last step, the disulfide bond between the labeled peptides and MNPs was cleaved to release the labeled peptides. The disulfide linked NHS ester modified Fe3O4@SiO2 MNPs were tested using a small peptide, and a model protein (bovine serum albumin) followed by liquid chromatography-tandem mass spectrometry analysis (LC-MS/MS) of labeled peptides. In the next step, disulfide linked, NHS ester modified Fe3O4@SiO2 MNPs (150 nm) successfully labeled the solvent exposed cell surface peptides of Saccharomyces cerevisae. Electron microscopic analysis confirmed the cell surface binding of NHS ester modified Fe3O4@SiO2 MNPs. Mass spectrometric analysis revealed the presence of 30 unique proteins containing 56 peptides. Another MNPs based labeling reagent was developed to target solvent exposed carboxyl acid residues of peptides and proteins. The surface of Fe3O4@SiO2 MNPs was modified with free amine groups via a disulfide bond. Solvent exposed carboxyl groups of ACTH 4-11 and BSA were labeled by using1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) chemistry. Upon cleaving the disulfide bond, labeled peptides were analyzed by LC-MS/MS. The MNPs containing labeling reagents offers specific labeling under physiological conditions and rapid magnetic separation of labeled peptides prior to mass spectrometric analysis. The ability of large Fe3O4@SiO2 MNPs to specifically attach to cell surface makes them a potential candidate to study the surface of variety of different cell types and complex proteins surrounded by lipid bilayer.

This dissertation describes the advantages and feasibility of newly synthesized near-infrared (NIR) bis-heptamethine cyanine (BHmC) dyes for non-covalent labeling schemes. The NIR BHmCs were synthesized for biomolecule assay. The advantages of NIR BHmCs for biomolecule labeling and the instrumental advantages of the near-infrared region are also demonstrated. Chapter 1 introduces the theory and applications of dye chemistry. For bioanalysis, this chapter presents covalent and non-covalent labeling. The covalent labeling depends on the functionality of amino acids and the non-covalent labeling relies on the binding site of a protein. Due to the complicated binding process in non-covalent labeling, this chapter also discusses the binding equilibria in spectroscopic and chromatographic analyses. Chapter 2 and 3 evaluate the novel BHmCs for non-covalent labeling with human serum albumin (HSA) and report the influence of micro-environment on BHmCs. The interesting character of BHmCs in aqueous solutions is that the dyes exhibit non- or low-fluorescence compared to their monomer counterpart, RK780. It is due to their H-type closed clam-shell form in the solutions. The addition of HSA or organic solvents opens up the clam-shell form and enhances fluorescence. The binding equilibria are also examed. Chapter 4 provides a brief introduction that summaries the use of capillary electrophoresis (CE), and offers a detailed instrumentation that discusses the importance and advantage of a detector in NIR region for CE separation. Chapter 5 focuses on the use of NIR cyanine dyes with capillary electrcophoresis with near-infrared laser induce fluorescence (CE-NIR-LIF) detection. The NIR dyes with different functional groups show that RK780 is a suitable NIR dye for HSA labeling. The use of BHmCs with CE-NIR-LIF reduces signal noises that are commonly caused by the interaction between NIR cyanine dyes and negatively charged capillary wall. In addition, bovine carbonic anhydrase II (BCA II) is applied to study the influence of hydrophobicity on non-covalent labeling. Finally, chapter 6 presents the conformational dependency of BHmCs on the mobility in capillary and evaluates the further possibility of BHmCs for small molecule detection. Acridine orange (AO) is used as a sample and it breaks up the aggregate and enhances fluorescence. The inserted AO into BHmC changes the mobility in capillary, owing to the conformational changes by AO.