Spelling suggestions: "subject:"buclear explosions"" "subject:"anuclear explosions""
1 |
Simulation of conductive environments using transmission line modellingScaramuzza, Richard Alan January 1993 (has links)
No description available.
|
2 |
Primary seismic wave (P) at 250-350 km compared to measured wave to 0.3 km from GNOME nuclear explosionLaun, Philip Royal 09 December 1964 (has links)
The first cycle of seismic waves recorded at distances of 45,
300 and 355 km. from the GNOME nuclear explosion was used to determine
whether the near source wave characteristics at 0.3 km.
could be determined from distance measurements. Both head wave
and body wave propagation were considered. First the recorded signals
at distance were inversely propagated back to the near source
region as head waves, and secondly, the measured source at 0.3 km.
was propagated out to 300 km. from the source as a body wave. In
both cases, restricted comparisons between theory and observation
can be made, but the comparison appears to favor the body wave type
of propagation. More research is needed to make a more conclusive
choice between the two modes of propagation. Methods were developed
which can be used to determine source motion from distance measurements
when the data are sufficient to do so. / Graduation date: 1965
|
3 |
Locating an underwater site of a nuclear explosion detected by a hydroacoustic networkHughes, T. January 1962 (has links) (PDF)
Thesis (M.S.)--Naval Postgraduate School, 1962. / Thesis Advisor(s): Cunningham, W. P. "1962." Description based on title screen as viewed on January 22, 2009. Includes bibliographical references (p. 32). Also available in print.
|
4 |
A geological engineering evaluation of an underground nuclear test siteSharp, Robert R. January 1972 (has links)
No description available.
|
5 |
Improving Estimates of Seismic Source Parameters Using Surface-Wave Observations: Applications to Earthquakes and Underground Nuclear ExplosionsHowe, Michael Joseph January 2019 (has links)
We address questions related to the parameterization of two distinct types of seismic sources: earthquakes and underground nuclear explosions. For earthquakes, we focus on the improvement of location parameters, latitude and longitude, using relative measurements of spatial cluster of events. For underground nuclear explosions, we focus on the seismic source model, especially with regard to the generation of surface waves.
We develop a procedure to improve relative earthquake location estimates by fitting predicted differential travel times to those measured by cross-correlating Rayleigh- and Love-wave arrivals for multiple earthquakes recorded at common stations. Our procedure can be applied to populations of earthquakes with arbitrary source mechanisms because we mitigate the phase delay that results from surface-wave radiation patterns by making source corrections calculated from the source mechanism solutions published in the Global CMT Catalog. We demonstrate the effectiveness of this relocation procedure by first applying it to two suites of synthetic earthquakes. We then relocate real earthquakes in three separate regions: two ridge-transform systems and one subduction zone. In each scenario, relocated epicenters show a reduction in location uncertainty compared to initial single-event location estimates.
We apply the relocation procedure on a larger scale to the seismicity of the Eltanin Fault System which is comprised of three large transform faults: the Heezen transform, the Tharp transform, and the Hollister transform. We examine the localization of seismicity in each transform, the locations of earthquakes with atypical source mechanisms, and the spatial extent of seismic rupture and repeating earthquakes in each transform. We show that improved relative location estimates, aligned with bathymetry, greatly reduces the localization of seismicity on each of the three transforms. We also show how improved location estimates enhance the ability to use earthquake locations to address geophysical questions such as the presence of atypical earthquakes and the nature of seismic rupture along an oceanic transform fault.
We investigate the physical basis for the mb-MS discriminant, which relies on differences between amplitudes of body waves and surface waves. We analyze observations for 71 well-recorded underground nuclear tests that were conducted between 1977-1989 at the Balapan test site near Semipalatinsk, Kazakhstan in the former Soviet Union. We combine revised mb values and earlier long-period surface-wave results with a new source model, which allows the vertical and horizontal forces of the explosive source to be different. We introduce a scaling factor between vertical and horizontal forces in the explosion model, to reconcile differences between body wave and surface wave observations. We find that this parameter is well correlated with the scaled depth of burial for UNEs at this test site. We use the modified source model to estimate the scaled depth of burial for the 71 UNEs considered in this study.
|
6 |
Remote sensing analysis of cratered surfaces Mars landing hazard assessment, comparison to terrestrial crater analogs, and Mars crater dating models /Chee, Yenlai, January 2007 (has links)
Thesis (M.S.)--University of Texas at El Paso, 2007. / Title from title screen. Vita. CD-ROM. Includes bibliographical references. Also available online.
|
7 |
Improving nuclear explosion detection using seismic and geomorphic data setsZeiler, Cleat Philip, January 2008 (has links)
Thesis (Ph. D.)--University of Texas at El Paso, 2008. / Title from title screen. Vita. CD-ROM. Includes bibliographical references. Also available online.
|
8 |
Subsurface radioactive gas transport and release studies using the UTEX modelLowrey, Justin David 15 October 2013 (has links)
Underground nuclear explosions (UNEs) produce anthropogenic isotopes that provide the only definitive means by which to determine whether a nuclear explosion has taken place. Verification of a suspected test under the Comprehensive Nuclear-Test-Ban Treaty (CTBT) includes both on-site and atmospheric sampling of specific noble gas radioisotopes for analysis of origin. It is well-established that the processes of subsurface transport can affect the rate at which such gases will reach the surface. However, the relative abundance of anthropogenic isotopes reaching the surface following transport is currently assumed to rely solely on their direct fission yield, decay rate, and their production from precursor decay, making no account for the influence of transport processes on isotopic ratios. The Underground Transport of Environmental Xenon (UTEX) model has been developed to examine the possible effects of subsurface transport on radioxenon isotopic ratios as well as to consider a number of on-site inspection-related applications. In this work, background on the UTEX model's development, evolution and vetting is presented. This is followed by the characterization and analysis of a number of applications of the model for consideration of CTBT-relevant scenarios. Specifically, the UTEX model's capability to analyze CTBT on-site inspection concept of operations is demonstrated. This is accomplished through an examination of generalized UNE source terms, geological stratigraphy, UNE impact on local geology, natural soil-gas radionuclide backgrounds, atmospheric infiltration, and sampling methodology. It is shown that the processes driving noble gas transport through geological media can significantly skew the ratios of key radioxenon isotopes that are used to help verify whether or not a well-contained underground test has taken place. This result emphasizes the need for a broader understanding of radionuclide signatures used for CTBT verification purposes and the mechanisms that can alter them. / text
|
9 |
The character of the core-mantle boundary : a systematic study using PcPGassner, Alexandra Carina January 2012 (has links)
Assuming that liquid iron alloy from the outer core interacts with the solid silicate-rich lower mantle the influence on the core-mantle reflected phase PcP is studied. If the core-mantle boundary is not a sharp discontinuity, this becomes apparent in the waveform and amplitude of PcP. Iron-silicate mixing would lead to regions of partial melting with higher density which in turn reduces the velocity of seismic waves.
On the basis of the calculation and interpretation of short-period synthetic seismograms, using the reflectivity and Gauss Beam method, a model space is evaluated for these ultra-low velocity zones (ULVZs). The aim of this thesis is to analyse the behaviour of PcP between 10° and 40° source distance for such models using different velocity and density configurations. Furthermore, the resolution limits of seismic data are discussed. The influence of the assumed layer thickness, dominant source frequency and ULVZ topography are analysed. The Gräfenberg and NORSAR arrays are then used to investigate PcP from deep earthquakes and nuclear explosions.
The seismic resolution of an ULVZ is limited both for velocity and density contrasts and layer thicknesses. Even a very thin global core-mantle transition zone (CMTZ), rather than a discrete boundary and also with strong impedance contrasts, seems possible: If no precursor is observable but the PcP_model /PcP_smooth amplitude reduction amounts to more than 10%, a very thin ULVZ of 5 km with a first-order discontinuity may exist. Otherwise, if amplitude reductions of less than 10% are obtained, this could indicate either a moderate, thin ULVZ or a gradient mantle-side CMTZ.
Synthetic computations reveal notable amplitude variations as function of the distance and the impedance contrasts. Thereby a primary density effect in the very steep-angle range and a pronounced velocity dependency in the wide-angle region can be predicted. In view of the modelled findings, there is evidence for a 10 to 13.5 km thick ULVZ 600 km south-eastern of Moscow with a NW-SE extension of about 450 km. Here a single specific assumption about the velocity and density anomaly is not possible. This is in agreement with the synthetic results in which several models create similar amplitude-waveform characteristics. For example, a ULVZ model with contrasts of -5% VP / -15% VS and +5% density explain the measured PcP amplitudes.
Moreover, below SW Finland and NNW of the Caspian Sea a CMB topography can be assumed. The amplitude measurements indicate a wavelength of 200 km and a height of 1 km topography, previously also shown in the study by Kampfmann and Müller (1989).
Better constraints might be provided by a joined analysis of seismological data, mineralogical experiments and geodynamic modelling. / Unter der Annahme, dass flüssiges Eisen aus dem äußeren Erdkern mit dem festen, silikat-reichen Unteren Mantel reagiert, wird eine Einflussnahme auf die Kern-Mantel Reflexionsphase PcP erwartet. Ist die Kern-Mantel Grenze aufgeweicht, und nicht wie bislang angenommen ein diskreter Übergang, so zeichnet sich dies in der Wellenform und Amplitude von PcP ab. Die Interaktion mit Eisen führt zu teilweise aufgeschmolzenen Bereichen höherer Dichte, welche die seismischen Wellengeschwindigkeiten herabsetzen.
Basierend auf den Berechnungen von kurzperiodischen synthetischen Seismogrammen, mittels der Reflektivitäts- und Gauss Beam Methode, soll ein möglicher Modellraum dieser Niedriggeschwindigkeitszonen ermittelt werden. Das Ziel dieser Arbeit ist es das Verhalten von PcP im Distanzbereich von 10° bis 40° unter dem Einfluss dieser Modelle mit diversen Geschwindigkeits- und Dichtekontrasten zu untersuchen. Ferner wird das Auflösungsvermögen hinsichtlich seismischer Daten diskutiert. Entscheidende Parameter wie Anomaliedicke, Quellfrequenz und Topographie werden hierbei analysiert. Tiefe Erdbeben und Kernexplosionen, die sich im entsprechenden Entfernungsbereich zum Gräfenberg und NORSAR Array befinden, werden anschließend im Hinblick auf PcP ausgewertet.
Das seismische Auflösungsvermögen von Niedriggeschwindigkeitszonen ist stark begrenzt sowohl in Bezug auf Geschwindigkeits- und Dichtekontraste als auch hinsichtlich der Mächtigkeit. Es besteht sogar die Möglichkeit einer dünnen, globalen Kern-Mantel Übergangszone, selbst mit großen Impedanzkontrasten, ohne dass dies mit seismologischen Methoden detektiert werden könnte: Wird kein precursor zu PcP beobachtet aber das PcPmodel /PcPsmooth Amplitudenverhältnis zeigt gleichzeitig eine Reduktion von mehr als 10%, dann könnte eine sehr dünne Niedriggeschwindigkeitszone von ca. 5 km Mächtigkeit und einer Diskontinuität erster Ordnung vorliegen. Andererseits, ist PcP um weniger als 10% reduziert, könnte dies entweder auf eine dünne, moderate Niedriggeschwindigkeitszone oder einen graduellen Kern-Mantel Übergang hindeuten.
Die synthetischen Berechnungen ergeben starke Amplitudenvariationen als Funktion der Distanz, welche auf den Impedanzkontrast zurückzuführen sind. Dabei ergibt sich ein primärer Dichteeffekt im extremen Steilwinkelbereich und ein maßgeblicher Geschwindigkeitseinfluss im Weitwinkelbereich. Im Hinblick auf die modellierten Resultate lässt sich eine 10 - 13.5 km mächtige Niedriggeschwindigkeitszone 600 km südöstlich von Moskau mit einer NW-SE Ausdehnung von mindestens 450 km folgern, wobei eine exakte Aussage über Geschwindigkeiten und Dichte nicht möglich ist. Dies ist im Konsens mit den synthetischen Berechnungen, wonach viele unterschiedliche Modelle ähnliche Amplituden- und Wellenformcharakteristiken erzeugen. Zum Beispiel erklärt ein Modell mit Kontrasten von -5% VP / -15% VS and +5% Dichte die gemessenen PcP Amplituden.
Darüber hinaus können unterhalb des südwestlichen Finnlands und nord-nordwestlich des Kaspischen Meeres Undulationen an der Kern-Mantel Grenze selbst vermutet werden. Unter Berücksichtigung früherer Studien, z. B. von Kampfmann and Müller (1989), deuten die Messergebnisse auf eine laterale Topographie von 200 km und eine Höhe von 1 km hin.
Eine Eingrenzung der potentiellen Anomaliemodelle kann nur durch eine gemeinsame Auswertung mit mineralogischen Experimenten und geodynamischen Modellierungen erfolgen.
|
10 |
Desenvolvimento de processos de microusinagem com laser de pulsos ultracurtos / Micro machining process development with ultrashort laser pulsesMIRIM, DENILSON de C. 11 November 2016 (has links)
Submitted by Claudinei Pracidelli (cpracide@ipen.br) on 2016-11-11T17:33:21Z
No. of bitstreams: 0 / Made available in DSpace on 2016-11-11T17:33:21Z (GMT). No. of bitstreams: 0 / O desenvolvimento de sistemas laser com pulsos ultracurtos trouxe a possibilidade de usinagem de estruturas muito pequenas em praticamente qualquer tipo de material. Neste trabalho foi dada continuidade a estudos já iniciados no Centro de Lasers e Aplicações (CLA) com os materiais dielétricos, introduzindo a largura temporal dos pulsos laser como mais uma variável e utilizando os conhecimentos adquiridos para a determinação de limiares de ablação e parâmetros de incubação em alguns metais como: aço AISI 1045, aço inoxidável VI138, cobre eletrolítico e molibdênio. A ausência de calor no processo de ablação dos metais torna-se muito difícil, pois a criação de uma camada de íons é muito prejudicada pela mobilidade eletrônica ao seu redor. Assim a ablação de metais com pulsos ultracurtos, tem como principal mecanismo a explosão de fase associada a outros processos que também contribuem na ablação, porém em menor escala, como a explosão coulombiana e a fusão ultrarrápida. Além disso, propriedades como a constante de acoplamento elétron-fônon e a condutividade térmica assumem um papel importante e devem ser levadas em conta na investigação do processo de ablação dos metais. Este trabalho possibilitou a obtenção de parâmetros de operação nos quais o calor transferido para a rede é minimizado, possibilitando a microusinagem de precisão e alterações controladas na morfologia da superfície de diversos metais. Os resultados propiciaram assim condições para novos desenvolvimentos e aplicações práticas de usinagem com pulsos ultracurtos. / Tese (Doutorado em Tecnologia Nuclear) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
|
Page generated in 0.0638 seconds