Yes / This study focuses on numerical modeling of condensation of water vapor in a Laval nozzle, using the liquid drop nucleation theory. Influence of nozzle geometry, pressure, and temperature on the average drop size is reported. A computer program written in MATLAB was used used to calculate the nucleation and condensation of water vapor in the nozzle. The simulation results are validated with the available experimental data in the literature for steam condensation. The model reveals that the average drop size is reduced by increasing the divergent angle of the nozzle. The results also confirm that increasing the inlet pressure has a direct effect on the average drop size while temperature rise has an inverse effect on the drop size.

No / Nucleation and condensation of mercury vapor has been investigated in various divergent angle and operating condition. Divergent angle has a great effect on droplet size at the end of nozzle. Influence of operating condition such as pressure and temperature on the size of droplet has been investigated. A one-dimensional mathematical model based on classical nucleation and growth has been developed to calculate the nucleation and condensation of mercury vapor. A mercury vapour turbine has been used in conjunction with a steam turbine for generating electricity. The mercury cycle offers an efficiency increase compared to a steam-only cycle because energy can be injected into the Rankine Cycle at higher temperature. The target of modeling is predicting the droplet size of mercury nano-particles during rapid expansion. The results are verified by accurate experimental data available in the literature. The governing equations were solved using Runge-Kutta third-order numerical method in MATLAB software.