This thesis describes the development and implementation of single-molecule carbon nanotube-based field-effect transistors (smFETs) for studies of nucleic acid dynamics. Single-molecule techniques, most notably fluorescence resonance energy transfer (smFRET) and single-molecule force spectroscopy, have been employed to investigate biomolecular dynamics due to their ability to directly observe discrete, rare events, as well as to characterize structural motions in a diverse ensemble. However, these techniques are hampered by difficulties in measuring millisecond-scale dynamics, such as base pair rearrangements, as well as the inability to observe unperturbed individual molecules for long times. Alternatively, smFETs allow observation of the dynamics of charged biomolecules, such as charged amino acids in proteins or the phosphate groups of nucleic acid backbones, with microsecond temporal resolution. Structural rearrangements of a single charged molecule on the surface of a single-walled carbon nanotube (CNT) transistor can lead to measureable fluctuations in conductance through the CNT. Thus, this technique allows for simultaneous characterization of fast events and, due to the label-free and minimally-invasive nature of smFET technology, the quantification of how the frequency of these events change over long time-scales. A portion of this work describes smFET fabrication, focusing on improvements to the functionalization method, a critical step to reliably generate individual attachment sites on the CNT for subsequent single-molecule studies. A new synthetic chemistry approach is performed in ultraminiaturized, nanofabricated reaction chambers; using lithographically-defined nanowells, single-point attachments are achieved on hundreds of individual carbon nanotube transistors, providing robust statistics and unprecedented spatial control in adduct positioning. Each device acts as a sensor to detect, in real-time and through quantized changes in conductance, single-point functionalization of the nanotube, as well as consecutive chemical reactions and subsequent molecular interactions molecular conformational changes. In particular, this thesis is focused on studying the dynamics of nucleic acids using smFET technology. First, the smFET technique presented is verified by studying the thermodynamics and kinetics of DNA hybridization, the results of which compare favorably both with predicted values and previous smFET studies using alternative device architectures. Next, the reversible folding of a single-stranded telomeric DNA sequence known to form a G-quadruplex structure is studied, revealing the characteristic increased stability of the G-quadruplex structure in the presence of potassium ions relative to sodium ions. Finally, smFET studies of the dynamics of the adenine-sensing pbuE riboswitch aptamer found in Bacillus subtilis are discussed. These results demonstrate how long-lived, ligand-dependent intermediates form at a base-pair level and suggest that these intermediates have consequences for riboswitch-regulation by adenine binding to the aptamer. With the increased time resolution of smFET technology, this work has achieved the first observation of RNA zipping and unzipping at the single-molecule level, as well as label-free observations of the effects of a three-way junction motif on helix zipping and unzipping.

Aberrant expression of short non-coding micro RNAs (miRNA) in many human diseases, along with remarkable stability in physiological media, has made them attractive clinical biomarkers. In particular, miRNA-122 is substantially elevated in plasma of patients with established drug-induced liver injury and can also be used to identify early liver injury when current markers, such as alanine aminotransferase (ALT), still show normal levels. The development of a rapid test for miRNA-122 e.g. in drug poisoning would allow earlier and more sensitive clinical diagnosis of liver injury. Nucleic acids are traditionally analysed by polymerase chain reaction (PCR), which has a high degree of sensitivity but suffers from high cost and is prone to sample contamination. The aim of this project is to develop a PCR free method to directly detect miRNA- 122 in biological samples using SMART technology. The SMART technology takes advantage of dynamic chemistry for sequence specific recognition of nucleic acids using aldehyde-modified nucleobases (SMART nucleobases), and target-complementary peptide nucleic acid (PNA) probe containing an “abasic” position (so called modified PNA probe). In this study, this unique detection method was used in a fluorescent detection with the use of light up probes, which are probes with an environmental dye as nucleobase; a FRET system was also designed to allow the discrimination between perfect match target and mismatched one. The SMART technology was also transferred onto magnetic beads to develop an ELISA like assay allowing sensitive and rapid detection of single stranded DNA mimic of the miRNA-122. With its potential PCR free approach, this easily adapted platform promises to transform and expand routine clinical diagnostic testing and screening for circulating miRNAs.

The structure and function of RNA molecules are dependent on RNA-metal ion interactions in both diffusive and direct ways. Structural information for RNA has been obtained using various biophysical and biochemical methods. In this study, using site-directed spin labeling (SDSL) and EPR spectroscopy, distances in RNA duplexes, TAR RNA, and the hammerhead ribozyme have been measured to investigate RNA structures. Kinetic measurements have been performed in the extended hammerhead ribozyme to correlate the catalytic function with metal dependent ribozyme folding. As a basic model system for distance measurements, inter-spin distances in RNA duplexes with spin labels at various positions are measured using SDSL with continuous EPR and a Fourier deconvolution method. Divalent metal-ion dependent TAR RNA folding from bent to extended conformers is monitored by measuring inter-spin distances near the bulge region. In order to investigate a proposed loop-loop interaction in the extended hammerhead ribozyme which significantly enhances the ribozyme activity, distance measurements, dynamics studies, and kinetics measurements have been performed. We have introduced PELDOR long-distance measurements in order to investigate metal dependent folding of the hammerhead ribozyme. The dynamics of the spin labels attached to the hammerhead ribozyme with increasing mono- and divalent metal ion concentrations are monitored using CW EPR spectroscopy at room temperature. EPR data show that a loop-loop interaction occurs near the U1.6 nucleotide, and that in 0.1 M NaCl the docking occurs at submillimolar Mg2+ concentrations ([Mg2+]1/2, docking = ~ 0.7 mM). Kinetics measurements show that the hammerhead ribozyme requires high concentration of Mg2+ for the maximum cleavage activity ([Mg2+]1/2, cleavage = ~ 90 mM).

Carbohydrates are known to play important roles in a large number of physiological and pathological processes. Conceivably, “binders” of carbohydrates of biological importance could be used as diagnostic and therapeutic agents. Currently, lectins are the major available tools in research for carbohydrate recognition. However, the available lectins often have cross-reactivity issues, along with the high costs and stability issues. Therefore, there is a critical need to develop alternatives (lectin mimics). In this regard, there have been very active efforts in developing different “binders”, such as small molecule lectinmimics and aptamers. Among all the small molecule lectinbmimics developments, boronic acid stands out as the most important building blocks of the sensors design for carbohydrates biomarkers due to its intrinsic binding affinities with diols. To address a fundamental question that whether boronic acid also binds to six-membered ring sugars, with very limited precedents, we provided a concrete experimental evidence of the binding. Specifically, a series of isoquinolinylboronic acids were found to have remarkably high binding affinities with fluorescence change upon binding to representative sugars. Most importantly, these isoquinolinylboronic aicds showed weak but very encouraging bindings with six-membered sugar model. All these promising results paves the way of using boronic acids, especially isoquinolinylboronic acid as building blocks for chemosensors design for biological carbohydrates biomarkers, which universally contain six-membered ring and liner diols. Aptamer provides another alternative way for sensors development for carbohydrates biomarkers as lectin mimics. Compared to lectins, they are normally cheaper and more stable. However, there is much less options. Another challenging area for aptamer-based lectin mimics development is the difficulty to differentiate changes in glycosylation patterns of a glycoprotein, which affect the function of a glycoprotein and thus recognized as biomarkers. To address this major challenge, our group first demonstrated that the incorporation of a boronic acid into DNA would allow for the aptamer selection process to gravitate towards the glycosylation site. To examine the generality of boronic acid incorporation, increase the structural diversity, and broaden the application of boronic acid-modified DNA, a series of B-TTP analogues with simplified structures were designed, synthesized, and successfully incorporated into DNA. A simple route was also developed using 1,7-octadiyne as a linker for both Sonogashira coupling with thymidine and CuAAC tethering of a boronic acid moiety. This paves the way for the preparation of a large number of B-TTPs with different structural features for aptamer selection or array analysis. Finally, bacterial quorum sensing has received much attention in recent years because of its relevance to pathological events such as biofilm formation. As one of the very first groups that developed a series of antagonists for AI-2 mediated quorum sensing, we herein designed and synthesized a series of analogues based on the structures of two lead inhibitors identified through virtual screening. Besides, we also examined their inhibitory activities, twelve of which showed equal or better inhibitory activities compared with the lead inhibitors. The best compound showed an IC50 of about 6 mM in a whole cell assay using Vibrio harveyi as the model organism. This encouraging results and SAR discuss also paves the way for the finding of more potent compound through further structure optimization.

Methicillin Resistant Staphylococcus aureus (MRSA) is one of the most important threats of nosocomial infections in many regions of the world and Vancomycin Resistant Enterococcus (VRE) is an emerging pathogen that develops full resistance against third-generation glycopeptide antibiotics. Conventional methods for identification of MRSA and VRE generally depend on culturing, which requires incubation of biological samples at least 24-72 hours to get accurate results. These methods are time consuming and necessitate optical devices and experts for evaluation of the results. On the other hand, early diagnosis and initiation of appropriate treatment are necessary to decrease morbidity and mortality rates. Thus, new diagnostic systems are essential for rapid and accurate detection of biological analytes at the point of care. This study presents design, fabrication, and implementation of MEMS based micro electrochemical sensor (&micro / ECS) to detect the methicillin resistance in Staphylococcus aureus and vancomycin resistance in Enterococcus species. To the best of our knowledge, the developed sensor is the first &micro / ECS which utilizes on-chip reference (Ag), working (Au), and counter (Pt) electrodes together with a microchannel to detect MRSA and VRE. The characterization of the designed sensor was achieved analyzing the interactions of the buffer solutions and solvents with the electrodes and Parylene C film layer by using optical and electrochemical methods. Specific parts of genes that are indicators of antimicrobial resistances were used in order to detect the resistances with high selectivity and sensitivity. Thus, synthetic DNA and bacterial PCR product were used as target probes in redox marker based detection and enzyme based detection, respectively. In order to enhance the hybridization, folding structures of the capture probe were investigated by using mfold Web Server. In redox marker based detection, the hybridization of DNA was indirectly detected by using Hoechst 33258 as redox marker with differential pulse voltammetry. The cross reactivity of the tests were performed by using different target probes of femA genes of S. aureus and S. epidermis, which are the major genes detected in methicillin detection assays. Consequently, amplification of signal by using horseradish peroxidase and TMB/H2O2 as substrate was achieved in order to enhance detection sensitivity. The sensor could detect 0.01 nM 23-mer specific part of mecA gene with redox marker based detection and 10 times diluted PCR product with enzyme-based detection in about six hours including the steps of sample preparation from whole blood. This sensor with its compatibility to MEMS fabrication processes and IC technology has a promising potential for a hand-held device for POC through the integration of micropotentiostat.

The structure and function of RNA molecules are dependent on RNA-metal ion interactions in both diffusive and direct ways. Structural information for RNA has been obtained using various biophysical and biochemical methods. In this study, using site-directed spin labeling (SDSL) and EPR spectroscopy, distances in RNA duplexes, TAR RNA, and the hammerhead ribozyme have been measured to investigate RNA structures. Kinetic measurements have been performed in the extended hammerhead ribozyme to correlate the catalytic function with metal dependent ribozyme folding. As a basic model system for distance measurements, inter-spin distances in RNA duplexes with spin labels at various positions are measured using SDSL with continuous EPR and a Fourier deconvolution method. Divalent metal-ion dependent TAR RNA folding from bent to extended conformers is monitored by measuring inter-spin distances near the bulge region. In order to investigate a proposed loop-loop interaction in the extended hammerhead ribozyme which significantly enhances the ribozyme activity, distance measurements, dynamics studies, and kinetics measurements have been performed. We have introduced PELDOR long-distance measurements in order to investigate metal dependent folding of the hammerhead ribozyme. The dynamics of the spin labels attached to the hammerhead ribozyme with increasing mono- and divalent metal ion concentrations are monitored using CW EPR spectroscopy at room temperature. EPR data show that a loop-loop interaction occurs near the U1.6 nucleotide, and that in 0.1 M NaCl the docking occurs at submillimolar Mg2+ concentrations ([Mg2+]1/2, docking = ~ 0.7 mM). Kinetics measurements show that the hammerhead ribozyme requires high concentration of Mg2+ for the maximum cleavage activity ([Mg2+]1/2, cleavage = ~ 90 mM).

In this study we use AFM-based nanolithography technique to produce nanofeatures of the single strand DNA and LNA probe molecules which are prepared via thiolated nucleic acid self-assembled monolayers (SAMs) on gold substrates. The goal is to observe the topographic changes of the DNA film structures resulting from the formation of rigid double strand DNA when the target and probe DNAs bind together. The so-called hybridization depends strongly on the probe density on the substrate surface. To find the proper probe density for hybridization, we vary the concentration of the probe DNA and search for the optimal conditions for measuring the height changes of the nanofeatures. We also monitor the topographic changes of the DNA nanofeatures in the different target DNA concentrations as a function of time, and the binding isotherms are fitted with the Langmuir adsorption model to derive the equilibrium dissociation constant and maximum hybridization efficiency. In addition, we extend the nanoscale hybridization reaction detection to mismatched DNA:DNA and LNA:DNA hybridization, and observe that topographic change of mismatched hybridization is inconspicuous and rapidly reach equilibrium. The results reveal the apparent difference between the perfect match and mismatch conditions, and validate that this approach can be applied to differentiate the situations for both perfect match and mismatch cases, demonstrating its potentials in the gene chip technology.

Improving the identification ability of surfaced-immobilized nucleic acid probes for small size DNA or RNA targets, utilizing optical or electrochemical methods, has been the goal for the gene chip technology. This study focuses on new probe design for introducing hairpin structural features and locked nucleic acid modification. We use three kinds of probes (DNA-LN, DNA-HP and LNA-HP) to prepare recognition layers via self-assembly processes on a gold substrate, and utilize AFM-based nanolithography technique to produce nanofeatures to observe the stiffness changes of oligonucleotide chains resulting from the formation of rigid double stranded duplexes when target sequence hybridizes to the probe. We also monitor the topographic changes upon exposure to the single mismatched and non-complementary targets as a function of time. The results reveal LNA-HP probes exhibit the highest response to discriminating single-point mutation in the base sequence. In addition, we study the effects of salt concentration, reaction temperature and the small size on the hybridization efficiency.

This thesis presents the crystal structures of 2', 5', cyclic and modified nucleosides / nucleotides. Chapter I gives a brief account of the structural studies on 2', 5' and modified nucleotides. It also presents a short, summary of unusual nucleic acids structures studies on hydration patterns and metal ion interactions Nomenclature and conventions used for describing the conformatioNa1 features are presented. FiNa1ly, the crystallographic suite of programs used for processing the intensity data, structure solution, refinement and generating various diagrams are mentioned. Chapter II describes the crystal structures of anhydrous and hydrated sodium salt of N6-methyl adenosine-S'-monophosphate. N6-AMP-A (anhydrous form) belongs to the trigoNa1 space group P3221 with unit cell dimensions a = b = 10.30 A and c= 25.03 A while N6-AMP-H (hydrated form) belongs to orthorhombic space group C222X with a= 6.910 A, b= 19.318 A, and c= 41.070 A. CuKα intensity data consisting of 1740 and 2740 observed reflections were collected on a CAD4 diffractometer. Both structures were solved using SHELXS97 and refined to R factors of 0.0336 and 0 0381 for anhydrous and hydrated forms respectively. In both structures the adenine bases are in the ant% conformation with respect to the ribose but their torsion angles XCN differ significantly by 78° The ribose moiety shows CS-endo puckering and the conformation about the C4/-C5/ bond is g+ and t in the anhydrous and hydrated structures respectively. The two Na+ ions, present m the hydrated form, coordinate with water oxygen atoms only. A notable feature of the Na+ ion coordination in the anhydrous form is the participation of N3 and N7 of the base besides macrochelation between base-ribose and base-phosphate moieties. Adenine bases in both forms stack at a separation of about 3.4 A between them N6-AMP molecules pack as if one set of bases intercalate between the other set in the hydrated structure while they form helix like pattern m the anhydrous structure Molecular dynamics calculations were carried out for both structures with a view to obtain greater insight into the effect of hydration on the conformation of the molecule. Stereochemically permissible models for poly-A using the N6-AMP-H coordinates were generated using the method developed by Srinivasan and Olson. Its features and possible biological relevance are discussed. Chapter III deals with the structure of sodium adenosine-5'-monosulfate trihydrate (5'-AMS). Intensity data for this modified nucleotide were collected at the Brookhaven NatioNa1 Laboratory, Synchrotron facility, USA. 5'-AMS belonged to the orthorhom bic space group P2!2!2i with unit cell parameters a= 20.698 A, b= 24.621 A and c= 25.925 A and eight molecules, eight Na+ ions and 23 water molecules in the asymmetric unit of the lattice. Never before a nucleotide structure having eight molecules in the asymmetric unit has been reported. Out of 84177 reflections collected using a radiation of A =0.92 A, 9108 independent reflections having Io>2a(Io) were considered observed. The structure was solved using the program Shake and Bake (SnB) and refined by, SHELXL97. The fiNa1 R factor for 1971 parameters was 0.0397. Adenine bases of all the eight 5'-AMS molecules are in anti conformation with respect to the ribose moiety with XCN angles varying from -150 to -177°. But the conformations of the ribose moieties and the sulfate groups about the C4/-C5/ bond are not the same for all the molecules. 5'-AMS molecules A, B and D show C2-exo-C3-endo mixed puckering while C has C£-exo puckering. The remaining four molecules E, F, G and H have C3-endo conformation. The conformation about the C4/-C5/ bond for molecules A, B, C and D is g~ while for E, F and G it is g+. Molecule H shows both g+ and g~ since the 05' atom is disordered. An important feature of the metal ion coordination is the bidentate formation by sodium ions Na3 and Na7 with the sulfate group of molecule C and ribose hydroxyl oxygen atoms of molecule D respectively. Another feature which deserves mention is the participation of Nl and N7 of the adenine base m metal coordination Adenine bases of molecules A, B, C and D form self pairs with those of H, G, F and E respectively through N6...N7 and N6...N1 hydrogen bonds. The 5'-AMS molecules pack as duplexes in the unit cell. A Stereochemically permissible model for poly-A with sugar sulfate backbone using the 5'-AMS coordinates were generated using the method developed by Srinivasan and Olson and its features are discussed. Crystal structures of two polymorphs of mixed sodium and potassium salts of cytidine-5'-monophosphate hexahydrate are discussed in Chapter IV. The two polymorphs of 5'-CMP were grown using methanol and DMF respectively m the crystallization experiments. MoKα intensity data for CMP-I were collected on a Rigaku AFC image plate system while that for CMP-II were collected on a Bruker CCD Smart system. Both belong to the monoclinic space group P2X with a= 8.869 A, b= 20 580 A, c= 23.179 A, β= 105.79° and a= 8.929 A, b= 22.257 A and c= 20.545 A, β= 90.02° for CMP-I and II respectively. The the unit cell volume of the two polymorphs differ by just 12 A3 as the unit cell parameters are same, although the b and c axes are interchanged m CMP-II and their β value differs by 16°. Both polymorphs of CMP have four nucleotide molecules in the asymmetric unit of their orthorhombic lattices. But the number of metal ions and solvents are not the same in the two structures. CMP-I has five sodium ions, three potassium ions, 23 water and two methanol molecules while CMP-II has two sodium ions, four potassium ions, 22 water and an unknown solvent molecule (assigned as dimethyl ether) in the asymmetric unit. This is the first nucleotide structure having two different alkali metal ions (Na+ and K4") in the crystal structure. Out of 36946 and 31293 reflections collected 12247 and 15476 independent reflections having IO>2<J(I0) were considered observed for CMP-I and II respectively. Both structures were solved by combination of heavy-atom and direct methods using DIRDIF96 and refined using SHELXL97 to R factors of 0.0819 and 0 0867 for CMP-I and II respectively In both forms all the four molecules have anti conformation about the glycosidic bond, CS-endo conformation for the ribose moiety and g+ conformation about the C4'-C5' bond but their metal coordination patterns are significantly different. K1 ion in CMP-I forms an intra molecular macrochelate between the ribose and adenine base while K2 and K3 ions form bidentates with the cytosine and phosphate group of molecules A and D respectively. Na1, Na3 and Na5 are all involved in bidentate interactions with the ribose of molecule C, ribose of molecule A and phosphate of molecule D respectively. In contrast, Na2 and Na4 coordinates with solvent atoms only and do not interact with the nucleotide atoms at all. K1 and K2 ions of CMP-II form bidentates with the cytosines of molecules C and D respectively while K2 and K4 form intra molecular macrochela-tion between the base and ribose of molecules C and B respectively. Na1 and Na2 form bidentates with the ribose of molecules C and D respectively Comparison of the two polymorphs of CMP reveals that despite several striking conformatioNa1 similarities there are also significant differences between them. It was noticed that molecules A, B, C and D of CMP-I corresponds to C, B, D and A of CMP-II. Out of eight metal ions (five Na+ and three K+ ions) present in CMP-I four of them (Kl, K2, K3 and Na3) are found to have partners (K4, Kl, K3 and Na1) in CMP-II within a distance of 0.75 A. One of the water molecules OW8 of CMP-I is replaced by a potassium ion K2 in CMP-II within a distance of 0.92 A. Out of 23 water molecules present in the structure 14 are common to both of them and only 8 are different while one is replaced by an ion. The four crystallographically independent 5'-CMP molecules are linked by metal ions Kl, K3, Na1, Na3, Na5 and Kl, K2, K4, Na1 ions forming a tetramers in CMP-I and CMP-II respectively. An interesting feature of CMP-I and CMP-II is the simultaneous display of base-base and base-ribose stacking patterns. The four nucleotide molecules in the asymmetric unit are related by several pseudo two-fold axis and the r.m.s. Deviations between them after applying the pseudo symmetry are 0.21 and 0.17 A for CMP-I and II respectively. The nucleotide molecules in CMP-I and II pack as infinite linear chains parallel to the b and c axis respectively which repeat along the c and b axis respectively. In between these nucleotide columns metal ions and water molecules are located forming channels between them. Chapter V deals with anhydrous cytidine-2/-phosphate and potassium uridine-5'-phosphate hexahydrate structures. 2'-CMP crystallizes m the orthorhombic space group P212121 with a= 6.698 A, b= 7.436 A and c= 25.291 A with one molecule in the asymmetric unit. MoKα intensity data were collected on a CCD SMART system consisting of 7647 reflection of which 1456 independent reflections having lo>2a(lo) were considered observed. The structure was solved and refined to an R factor of 0.0385 for 186 parameters using SHELXL97. The cytosine base is in the anti conformation with respect to the ribose with XCN = -141.1° similar to that in the hydrated structure. But it differs significantly from the syn conformation observed in several 2'-purine and 2'-5' dinucleotide structures containing purine-pyrimidine sequences. The ribose moiety shows Ctf-endo and the conformation about the C4/-C5/ bond is t with (f)α = 169.3° and <pO( = -72 7° The t conformation in the anhydrous form is different from the g+ conformation m the hydrated form of 2'-CMP 5'-UMP.K crystallizes in the monoclinic space group P2;i with a= 13 034 A, b= 8 916 A, c= 16 205 A and β=98 64° with two nucleotides, four K ions and ten water molecules in the asymmetric unit MoKα intensity data of 19261 were measured on a Bruker CCD system of which 6891 independent reflections having lo>2a(lo) were accepted as observed. The structure was solved and refined by full matrix least square methods to an R factor of 0.0324 for 609 parameters. Uracil bases of both nucleotide molecules are in the anti conformation with respect to the ribose with XCN= -129.4° and -132 7°. Uracil bases of both nucleotide molecules are protonated at N3 Both ribose moieties show C2’-endo puckering with C2' atom displaced by 0.57 and 0.59 A from the best plane constituted by the remaining atoms The phosphate group is in a staggered orientation and the conformation about the C4/-C5/ bond is g* with <j>00 = -67.1 and -62.7 and Øoc = 54.6 and 59.5 for molecules A and B respectively. Potassium ion K2 forms a bidentate by coordinating with ribose 02' and 03' atoms of molecule B and a macrochelate between the uracil base and ribose of molecule A by coordinating with 02 and 02' atoms. K4 also forms a bidentate by coordinating with ribose O2' and 03' atoms of molecule A. The two 5'-UMP molecules form a dimer by coordinating with K2 and K3 ions. They are related by a pseudo two-fold axis and the r.m.s. deviation between the coordinates is 0 12 A. Crystal structures of 8-Benzylamino cychc-3'-5'-monophosphate (8-Benz-cAMP) and 8-mercaptoguanosine (8-MERG) are presented in Chapter VI. 8-Benz-cAMP crystallizes in the monoclinic space group P2x with unit cell dimensions a= 7.989 A, b= 12 589 A, c= 11.773 A and β= 93.82°. MoKα data were collected on a CCD system yielded 4331 independent observed reflection with Io2cr(Io) out of 9733 reflections collected. The structure was solved and refined to a R factor of 0 0451 with 367 parameters. The adenine base is in the syn conformation with XCN= 84.7° as in few other 8-substituted cyclic purine nucleotides but different from the simple cyclic purine nucleotides. The phenyl moiety is in the trans conformation with respect to the base. The ribose moiety shows rare C4’-exo puckering with a deviation of 0.70 A from the best plane constituted by the remaining four atoms. The 05' atom is m the t conformation with respect to the ribose with cpα = -174.8° and <pα = -59.6° since only in this conformation 3' and 5' cyclization is possible. Hydrogen bonds Nl. .O1P and N6...O5' link two nucleotide molecules. Adenine bases stack on the phenyl ring from above and below. The only water molecule present in the structure form hydrogen bonds with the nucleotide atoms. 8-mercaptoguanosine crystallizes in the monoclinic space group C2 with unit cell dimensions a= 23.246 A, b=9.751 A, c= 6.406 A and b= 90.91°. MoKα intensity data collected on CAD diffractometer yielded 2683 independent observed reflections having I0>2<r(I0). The structure was solved using SHBLXS 97 and refined using SHELXL97 to a R factor of 0.0565. The guanine base is in the syn conformation with XCN= 64.1°. The ribose ring shows C2-endo puckering with C2' atom deviating by 0.62 A from the best plane. An interesting feature of this structure is the intra-molecular hydrogen bond between the base N3 and the ribose 05' atoms. The last chapter (VII) describes the crystal structures of three modified adenine nucleosides N6-benzyl adenosine (N6-BA), N6-cyclohexyl adenosine (N6-CA) and 5'-trityl adenosine (5'-TA). N6-BA belongs to the triclinic space group PI with a= 5.008 A, b= 8.921 A, c= 9.762 A and a = 111.73°, β= 90.37°, 7 = 91.42° while N6-CA and 5'-TA belong to the monoclinic space group P2i with a= 12.205 A, b=15.265 A, c= 15.095 A, P = 110.64° and a= 8.823 A, b= 15.613 A, c= 10.078 A and β = 115.01° with three and one molecules in their asymmetric units respectively. The three structures of N6-BA, N6-CA and 5'-TA were solved and refined to R factors of 0.0355, 0.0655 and 0.0262 using 1656, 7549, 2473 independent reflections and 244, 677, 360 parameters respectively using SHELX97. The adenine base of N6-BA is in the anti conformation with XCN= 168.9°. The benzyl moiety is in the distal geometry with respect to the imidazole ring. The furanose ring shows CSI-exo-CS'-endo mixed puckering. There are several 7r-7r interactions observed in this structure. In contrast to N6-BA all three molecules of N6-CA show syn conformation about the glycosidic bond with XCN= 47.0°, 54 8°, 49 V for molecules A, B and C respectively. The cyclohexyl moiety of all three molecules are in the chair conformation. The ribose moieties of all three molecules show C2-endo puckering with C2' atom deviating by 0 59, 0 54, 0.57 A for molecules A, B and C respectively. The adenine base of the 5'-TA is in the anti conformation with \Cs= 168.4° and the ribose moiety shows C2-endo puckering The three phenyl rings of the trityl group are in staggered orientation. Interesting tape formation via N6…02' and N7...O3' hydrogen bonds is observed in all three nuclosides.

Kinetically controlled isothermal growth is fundamental to biological development, but it remains challenging to rationally design molecular systems that self-assemble isothermally into complex geometries via prescribed assembly and disassembly pathways. By exploiting the programmable chemistry of base pairing, sophisticated spatial and temporal control have both been demonstrated in DNA self-assembly, but largely as separate pursuits. This dissertation extends a new approach, called developmental self-assembly, that integrates temporal with spatial control by using a prescriptive molecular program to specify the kinetic pathways by which DNA molecules isothermally self-assemble into well-defined three-dimensional geometries. / Chemistry and Chemical Biology