This dissertation examines data transfers along the existing lines of cable TV. PLC equipment has been selected as the focus of this examination. The essay examines the question of Multicarrier modulation and focuses more specifically onto the problem of OFDM modulation, which is being used by the selected equipment. It further describes the process of integration of PLC equipment into the cable TV network, modifications of the CATV and the basic topology of the created data networks. The essay also offers a closer look onto a PLC modem and Head End from Corinex that have been used in the implementation of a data network in a selected rural settlement. The author has also raised the issue of the problems connected with cable wires connected with this particular type of data transfers and the solutions of some of the encountered problems. The characteristics of this network have then been measured during normal operation of the created network. Measurements have been carried out in order to determine the transfer speed on a physical and transfer level, the SNR of specific connections and the signal attenuation. The measurements have confirmed the suitability of the used PLC equipment for the purposes of data transfer along the cable TV lines as far as data speed and signal strength was concerned. A map of the particular cable TV lines and the PLC equipment has been included in the attachment.

The thesis deals with analysis of the PLC (Power Line Communication) system for data communications through powerlines. In the introduction describes the technology of data transmission through the energy network and is divided into categories corresponding with the explanation of the various specifications and features. Different types of coding, affecting the transmitted signal interference and modulation techniques used in a PLC are also described. The practical part is made up of telecommunications network model with transmission channel realized as additive white noise. The model can setup different types of modulation and coding in relate with the signal to noise ratio and bit error rates. The individual blocks settings are described in detail. The model was simulated. The results of simulation are displayed and evaluated at the end of work.

Este trabalho apresenta um novo algoritmo, denominado Intercalamento Temporal por Transformada de Fourier (FTI), desenvolvido para complementar sistemas de modulação digital. Com este processo, a informação é distribuida de forma difusa ao longo de um conjunto de símbolos, tanto no domínio do tempo como no da frequência. Constitui-se em um processo computacionalmente eficiente, especialmente adequado para operar em conjunto com a modulação OFDM, e que apresenta consideráveis ganhos de desempenho em algumas situações de degradação; por exemplo, é mais tolerante a ruídos impulsivos de longa duração do que a modulação OFDM convencional. Apresenta-se também um outro mecanismo, denominado de Realimentação de Erro, que melhora o desempenho do sistema em praticamente todas as situaçoes analisadas. Embora implique em aumento da carga computacional, este processo consiste de uma operação determinística, que dispensa etapas de iteração ou recursos computacionais distintos dos já disponíveis. Neste trabalho foi avaliada a utilização destas técnicas em um sistema OFDM com características similares ao sistema ISDB-T, adequado para radiodifusão de TV Digital . / This work introduces a new transform-based time interleaving algorithm: FTI-OFDM (Fourier Transform Interleaved OFDM), in which binary information is spread over several symbols, both in time and frequency domains. This process, designed to be included in digital modulation systems, is computationally efficient when used in conjunction with OFDM modulation. Simulations are used to show its superiority over the usual binary time interleaving used in ordinary OFDM under several impairment scenarios, that include long impulsive noise and deep fading. Also introduced in this work is the additional method of decision error feedback (ERF), that enhances the performance of FTI-OFDM in almost all situations. Furthermore, ERF is deterministic and non-iterative and employs the same computational resources found in OFDM systems. The performance of an FTI-OFDM system, similar to ISDB-T standard, is evaluated under several impairments, such as are found in Digital TV broadcasting environment.

Este trabalho apresenta um novo algoritmo, denominado Intercalamento Temporal por Transformada de Fourier (FTI), desenvolvido para complementar sistemas de modulação digital. Com este processo, a informação é distribuida de forma difusa ao longo de um conjunto de símbolos, tanto no domínio do tempo como no da frequência. Constitui-se em um processo computacionalmente eficiente, especialmente adequado para operar em conjunto com a modulação OFDM, e que apresenta consideráveis ganhos de desempenho em algumas situações de degradação; por exemplo, é mais tolerante a ruídos impulsivos de longa duração do que a modulação OFDM convencional. Apresenta-se também um outro mecanismo, denominado de Realimentação de Erro, que melhora o desempenho do sistema em praticamente todas as situaçoes analisadas. Embora implique em aumento da carga computacional, este processo consiste de uma operação determinística, que dispensa etapas de iteração ou recursos computacionais distintos dos já disponíveis. Neste trabalho foi avaliada a utilização destas técnicas em um sistema OFDM com características similares ao sistema ISDB-T, adequado para radiodifusão de TV Digital . / This work introduces a new transform-based time interleaving algorithm: FTI-OFDM (Fourier Transform Interleaved OFDM), in which binary information is spread over several symbols, both in time and frequency domains. This process, designed to be included in digital modulation systems, is computationally efficient when used in conjunction with OFDM modulation. Simulations are used to show its superiority over the usual binary time interleaving used in ordinary OFDM under several impairment scenarios, that include long impulsive noise and deep fading. Also introduced in this work is the additional method of decision error feedback (ERF), that enhances the performance of FTI-OFDM in almost all situations. Furthermore, ERF is deterministic and non-iterative and employs the same computational resources found in OFDM systems. The performance of an FTI-OFDM system, similar to ISDB-T standard, is evaluated under several impairments, such as are found in Digital TV broadcasting environment.

Η διαμόρφωση και η πολύπλεξη είναι από τα πιο σημαντικά τμήματα των συστημάτων ψηφιακής μετάδοσης και στόχος τους είναι να επιτύχουν την αποτελεσματική χρήση του καναλιού. Η τεχνική OFDM είναι μια μέθοδος διαμόρφωσης και πολύπλεξης για τη μετάδοση με πολλαπλές φέρουσες σε χρονικώς και συχνοτικώς επιλεκτικά κανάλια. Προσφέρει μεγαλύτερη ανοσία στη Διασυμβολική Παρεμβολή (ISI) και μπορεί να υλοποιηθεί εύκολα με χρήση του γρήγορου μετασχηματισμού Fourier. Η παρούσα διπλωματική εργασία στοχεύει στην καλή κατανόηση και παρουσίαση του ασύρματου καναλιού, του ισοδύναμου μοντέλου βασικής ζώνης του, καθώς και των φυσικών παραμέτρων, βάσει των οποίων κατηγοριοποιούμε τα ασύρματα συστήματα. Εξαιτίας των διαλείψεων πολυδιόδευσης, που δεν μπορούν να αποφευχθούν στα ασύρματα συστήματα, η τεχνική OFDM είναι περισσότερο κατάλληλη για αυτά τα συστήματα, παρά για τα ενσύρματα. Στη συνέχεια, προσομοιώνεται ένα σύστημα OFDM για διάφορα είδη καναλιών. Συγκεκριμένα, αρχικά θεωρείται ως περιβάλλον μετάδοσης το κανάλι AWGN και στη συνέχεια, το συχνοτικώς επιλεκτικό, σταθερό κανάλι. Στην επόμενη προσομοίωση χρησιμοποιήθηκε (συχνοτικώς επιλεκτικό) σταθερό κανάλι με εκθετική κρουστική απόκριση. Στις δύο τελευταίες προσομοιώσεις θεωρήσαμε κανάλι Rayleigh επίπεδης διάλειψης και ένα είδος συχνοτικώς επιλεκτικού καναλιού με διαλείψεις Rayleigh, αντίστοιχα. / Modulation and multiplexing are between the most important parts of a digital transmission system and their goal is to achieve an efficient use of the channel. Orthogonal Frequency Division Multiplexing (OFDM) is both a modulation and multiplexing method for multicarrier transmission through time and frequency selective channels. It offers a greater immunity to Inter-Symbol Interference (ISI) and can be easily implemented using the fast Fourier transform (FFT). This Diploma thesis aims at the interpretation and the presentation of wireless channel and OFDM technique, in detail. Initially, we described the wireless channel, its baseband equivalent, and the physical parameters that are used to classify the different types of it. Because of the multipath fading which is unavoidable in wireless systems, OFDM is more appropriate for these ones than for wire systems. Then, we simulate an OFDM system. The simulations take place in several types of (wireless) channel. Especially, we firstly considered an AWGN channel and then a frequency-selective, non-fading channel. We also used an exponential frequency-selective, non-fading channel. For the two last simulations we considered the one-tap (flat), Rayleigh fading channel, and a type of frequency-selective, fading channel.

The purpose of this paper is to study the possibilities of the OFDM system adaptive modulation. The study presents mechanism for acquiring the necessary data of every frequency subchannel using pilot signals and application of these data for system adjustment. The paper introduces the water-filling principle for subchannel power allocation on the basis of their SNR and adaptive modulation mechanisms for variety of OFDM usage. These mechanisms are implemented into a MATLAB model. The code is then transformed into graphical representation and using USRP2, the signal is transmitted by real world channel.

The main aim of this master's thesis was the create function models of wireless network technologies using the modern multitones modulation like is PFDM and FMT. This work is realised in Matlab – Simulink enviroment and models are tested in development kit. Development kit is universal software defined radio developer by Ettus.

Η εργασία αυτή ασχολείται με το πρόβλημα της εκτίμησης καναλιού σε συστήματα μετάδοσης OFDM. Το πρόβλημα αυτό συγκεντρώνει έντονο ερευνητικό ενδιαφέρον τα τελευταία χρόνια, καθώς συναντάται σε ένα ευρύ πεδίο εφαρμογών. Η άγνωστη συνάρτηση μεταφοράς του καναλιού στα ασύρματα συστήματα μετάδοσης, καθιστά απαραίτητη την εκτίμησή του πριν από οποιαδήποτε διαδικασία μετάδοσης. Στη συγκεκριμένη μεταπτυχιακή εργασία, αντικείμενο εξέτασης αποτελεί η επίδραση καναλιού με μη γραμμικά χαρακτηριστικά σε συστήματα μετάδοσης OFDM. Αρχικά, παρουσιάζεται ένας βελτιωμένος αλγόριθμος εκτίμησης καναλιού, ο οποίος βασίζεται σε ένα παραμετρικό μοντέλο. Η απόκριση συχνότητας του καναλιού εκτιμάται χρησιμοποιώντας ένα μοντέλο με L μονοπάτια. Γίνεται χρήση της μεθόδου ESPRIT για την αρχική εκτίμηση των πολυδρομικών καθυστερήσεων, ενώ η διαδικασία παρακολούθησης γίνεται με την τεχνική IPIC DLL. Με γνωστή την πληροφορία για τις πολυδρομικές καθυστερήσεις, εκτιμάται η απόκριση του καναλιού στο πεδίο της συχνότητας με τη μέθοδο του ελαχίστου μέσου τετραγωνικού σφάλματος. Ιδιαίτερης μνείας χρήζει το κριτήριο MDL (Minimum Description Length) που χρησιμοποιείται για την εύρεση των ενεργών μονοπατιών του καναλιού. Σύμφωνα με το κριτήριο, υπολογίζεται ο ιδιοχώρος, δηλαδή οι ιδιοτιμές και τα ιδιοδιανύσματα, του πίνακα αυτοσυσχέτισης του καναλιού. Ο ιδιοχώρος αυτός εμφανίζει ιδιαίτερη δομή και μπορεί να αναλυθεί σε κάθετους μεταξύ τους υποχώρους: τον υποχώρο του σήματος (signal subspace) και αυτόν του θορύβου (noise subspace). Έχει αποδειχθεί ότι η χρήση παραμετρικού μοντέλου καναλιού μπορεί να μειώσει δραστικά τις διαστάσεις του υποχώρου του σήματος και κατά συνέπεια να βελτιώσει την απόδοση της εκτίμησης του καναλιού. Στη συνέχεια εξετάζεται η δυνατότητα εφαρμογής του αλγόριθμου PAST κατά τη διαδικασία παρακολούθησης των πολυδρομικών καθυστερήσεων και η σύγκρισή του με την απόδοση του IPIC DLL. Ο αλγόριθμος PAST έχει χαμηλή υπολογιστική πολυπλοκότητα καθώς στηρίζεται σε αναδρομικές τεχνικές παρακολούθησης του ιδιοχώρου. Στα πλαίσια της μεταπτυχιακής εργασίας έγινε συγκριτική μελέτη των τεχνικών εκτίμησης καναλιού σε συστήματα μετάδοσης OFDM. Περιγράφονται τα βασικά χαρακτηριστικά των κυριότερων αλγορίθμων της βιβλιογραφίας και στη συνέχεια παρουσιάζονται τα αποτελέσματα των προσομοιώσεων σε περιβάλλον MATLAB. Με βάση τη θεωρητική μελέτη των μεθόδων εκτίμησης και τα αποτελέσματα των προσομοιώσεων, εξάγονται συμπεράσματα για τη βελτίωση της απόδοσης που παρουσιάζουν σε σχέση με τις μη παραμετρικές τεχνικές. Τέλος, υλοποιήθηκε ένας νέος αλγόριθμος για την εύρεση του υποχώρου του σήματος, ο οποίος βελτιώνει σημαντικά την απόδοση του κριτηρίου MDL. / The basic concept in this thesis is the problem of Channel Estimation in multipath fading chanels. The method we use is based on parametric channel modeling. Firstly, we use the MDL (Minimum Descreption Length) criterium in order to estimate the number of paths in the channel. Next the ESPRIT method calculates the Time Delays for every estimated path. The second part of the algorithm is used for tracking of time delays. We firstly use an IPIC DLL (InterPath Interference Cancellation Delay Locked Loop) technique and then the path gains are calculated via a MMSE estimator. There is also a study in Subspace Tracking problem. We use the PAST and PASTd algorithms to calculate the signal subspace for every OFDM symbol transmited. The two techniques we described increase the SER performance of the non parametric channel estimator by 2dB and the MSE performance by 5dB. We also describe a new algorithm which has better performance than the MDL criterium.

The work explores ways to generate the OFDM signal and LDPC channel coding methods. Describes the creation of basic modules of the communication system in Matlab and simulation methods for atmospheric transmission environment, including effects of turbulence, attenuation along the route and weather conditions on the transmitted signal.