Doctor of Philosophy (PhD) / Injuries to people living and working on farms in New South Wales continue to be a significant burden on the health system, Workers’ Compensation system, agricultural industries and farming families. Strategies to reduce the number and severity of injuries suffered by farmers and people working on farms rely on accurate information. Unfortunately there is no one dataset available to describe the circumstances surrounding farm injuries and the size of this burden in Australia. Hence, a number of different data sources are required to provide a picture of farm injuries. To date, there has been very little critical examination of what value each of these datasets provides to describing farm injuries. This Thesis aimed to: • Undertake surveillance of injuries occurring to people on farms or during agricultural production in NSW using data from an Emergency Department, NSW Hospital Separations information, NSW Workers’ Compensation Claims, and ABS Deaths data. • Critically examine the utility of Emergency Department, Hospital, Workers’ Compensation, and ABS Deaths Data for the surveillance of farm injuries in NSW. • Critically examine data classification systems used in Emergency Department, Hospital, Workers’ Compensation, and ABS Deaths data collections to describe the breadth of farm injuries in NSW. • Define the priority areas for farm injury prevention initiatives in NSW based on the information obtained from the examination of the data from Emergency Department, Hospital, Workers’ Compensation, and ABS Deaths. • Evaluate the effectiveness of the NSW Rollover Protective Structure (ROPS) rebate scheme and examine the utility of the data currently available in NSW to measure the performance of the program. Four datasets, Tamworth Emergency Department, Hospital Separations, Workers’ Compensation and the Australian Bureau of Statistics (ABS) Deaths data were used to provide information on the surveillance of farm injuries, describe the breadth of classifications used to describe farm injuries, and define priorities for the prevention of farm injuries. There were 384 farm-related injuries which presented to the Emergency Department at the Tamworth Base Hospital between 1 September 1997 and 31 August 1998. Emergency Department data collected in this study used the Farm Injury Optimal Dataset (FIOD) for classification, which allowed for a comprehensive picture of the circumstances surrounding the injury event. The three most common external causes of injury were related to horses, motorcycles, and animals. Commonly people were working at the time of injury. Children represented 21% of the people injured. The average number of injuries per 100 farms per annum was 34.7. An examination of hospital discharge data for NSW was undertaken for the period 1 July 1992 to 30 June 2000 where the location of the injury was a farm. Classification of cases in this dataset conformed to the International Classification of Disease (ICD) versions 9 and 10. There were 14,490 people who were injured on a farm during the study period. The three most common external causes of injury were motorcycles, animals being ridden and agricultural machinery. Children represented 17% of all farm injury cases. The rate per 1,000 farms ranged from 19 to 42 per annum. An examination of Workers’ Compensation claims for agricultural industries in NSW between 1 July 1992 and 30 June 2001 was undertaken. The ‘Type of Occurrence’ classification system was used to code the claims. There were 24,332 claims of which the majority were males (82%). The incidence of injury / disease in agriculture per annum varied from 37 per 1,000 workers to 73 per 1,000 workers. The rate per 1,000 agricultural establishments varied from 54 to 76. The average cost of a claim was $10,880 and the average time lost per claims was 9.2 weeks. There were 81 deaths and 3,158 permanent disabilities. The three most common agents were sheep / goats (5%), ferrous and non-ferrous metals (5%), crates / cartons / boxes / etc (5%). Using ABS deaths data to examine the deaths of people working and living on farms was limited to males whose occupation was recorded as ‘farmer and farm manager’ and ‘agricultural labourer and related worker’. There were 952 deaths over the period 1 January 1991 and 31 December 2000. The information provided a consistent series of cases over time. Areas where prevention should be directed included motor vehicle accidents; falls; agricultural machinery; other machinery; firearms; poisoning; and drowning. Using any one of the datasets alone to examine people injured on farms not only underestimates the number of people injured, but also misses particular types of agents involved in farm injuries. Each of the datasets used in this Thesis provides a different perspective of farm injury in NSW. By examining the information together, there are a number of areas which are consistently represented in each dataset such as falls and agricultural machinery. While no one dataset provided all the information that would be useful for the prevention of injuries, the available information does provide direction for the development of prevention strategies. The overall weakness of the information provided is that it misses a number of risk factors that contribute to farm injuries such as fatigue and training. The lack of appropriate denominator information also makes it difficult to directly compare the datasets and estimate the size of the problem. There are a number of additional coding categories that could be included in each dataset that would provide a better understanding of the different groups at risk of sustaining an injury on a farm or during agricultural work. These coding categories include activity at time of injury, admission to hospital, and occupation. An example of the use of data to determine the effectiveness of a farm injury prevention program is the ‘NSW Rollover Protective Structure (ROPS) Rebate Scheme’ evaluation. Tractor rollover deaths have been identified as an issue for prevention by Farmsafe Australia; however, such deaths were not identified in any of the datasets used in this Thesis due to coding limitations in the ABS data. In this Thesis information about the evaluation of the ‘NSW ROPS Rebate Scheme’ is presented. The scheme was successful in fitting 10,449 ROPS to tractors and the following lessons were learnt: when providing a rebate, the administration (i.e. sending the cheque) needs to be done well; advertising is important and should be co-ordinated, increase the awareness of the risk(s) the intervention is aiming to prevent and effectiveness of subsequent solution (s); the program should ensure there is an increased awareness of the outcome the intervention is aiming to prevent; if regulation is part of the program, enforcement needs to undertaken; and should address any barriers to uptake. The information provided in this Thesis highlights the substantial burden that farm injury places on the agricultural and rural sector of NSW. While there is no one data source that can describe the circumstances and the burden of farm injuries, the currently available datasets do provide an insight into the circumstances of farm injuries and the burden these injuries place on health, Workers’ Compensation, agricultural industries and farming families.

A substantial body of literature links precarious employment with increased exposure to occupational hazards and adverse OHS outcomes. While a majority of these studies has found that precarious work has adverse effects on OHS outcomes, findings are more mixed with regard to temporary employment (the focus of this study), and there are still many gaps in the research that have yet to be addressed. Various models have been proposed in an attempt to explain the causal mechanisms behind the health effects of precarious employment. However, relatively few studies have empirically investigated these mechanisms. There is also a dearth of research on the effects of precarious work on OHS outcomes in parts of the service sector, such as hospitality, despite the fact that these industries make extensive use of precarious work arrangements. Further, few studies have been based on international comparative data (and even fewer where the focus has been on a particular industry). This thesis seeks to address these gaps by investigating OHS outcomes of hotel workers engaged under different employment arrangements in Ireland and Australia. There are two principle objectives to the study. The first is to examine OHS outcomes, while the second is to test and refine the Quinlan, Mayhew and Bohle (2001) Three Factor Model in an attempt to explain the links between health and precarious employment. It also aims to enhance the understanding of the mechanisms by which these factors interact to influence outcomes. This study defines and tests a health and injury structural model. The structural equation modelling techniques employed have not been used in previous studies in this area and provide a clearer portrayal of the complex relationships between the many variables affecting the OHS of precarious employees in the hotel industry. The OHS outcomes range from exposure to occupational violence and stress to a wide variety of debilitating physical ailments. This research also highlights several indirect or spillover effects of precarious employment. The inconsistencies between both locations are mainly regarding perceived job security, economic and reward pressures and lack of control over working hours. Despite these differences, there are basic similarities between the locations that are important.

Doctor of Philosophy (PhD) / Injuries to people living and working on farms in New South Wales continue to be a significant burden on the health system, Workers’ Compensation system, agricultural industries and farming families. Strategies to reduce the number and severity of injuries suffered by farmers and people working on farms rely on accurate information. Unfortunately there is no one dataset available to describe the circumstances surrounding farm injuries and the size of this burden in Australia. Hence, a number of different data sources are required to provide a picture of farm injuries. To date, there has been very little critical examination of what value each of these datasets provides to describing farm injuries. This Thesis aimed to: • Undertake surveillance of injuries occurring to people on farms or during agricultural production in NSW using data from an Emergency Department, NSW Hospital Separations information, NSW Workers’ Compensation Claims, and ABS Deaths data. • Critically examine the utility of Emergency Department, Hospital, Workers’ Compensation, and ABS Deaths Data for the surveillance of farm injuries in NSW. • Critically examine data classification systems used in Emergency Department, Hospital, Workers’ Compensation, and ABS Deaths data collections to describe the breadth of farm injuries in NSW. • Define the priority areas for farm injury prevention initiatives in NSW based on the information obtained from the examination of the data from Emergency Department, Hospital, Workers’ Compensation, and ABS Deaths. • Evaluate the effectiveness of the NSW Rollover Protective Structure (ROPS) rebate scheme and examine the utility of the data currently available in NSW to measure the performance of the program. Four datasets, Tamworth Emergency Department, Hospital Separations, Workers’ Compensation and the Australian Bureau of Statistics (ABS) Deaths data were used to provide information on the surveillance of farm injuries, describe the breadth of classifications used to describe farm injuries, and define priorities for the prevention of farm injuries. There were 384 farm-related injuries which presented to the Emergency Department at the Tamworth Base Hospital between 1 September 1997 and 31 August 1998. Emergency Department data collected in this study used the Farm Injury Optimal Dataset (FIOD) for classification, which allowed for a comprehensive picture of the circumstances surrounding the injury event. The three most common external causes of injury were related to horses, motorcycles, and animals. Commonly people were working at the time of injury. Children represented 21% of the people injured. The average number of injuries per 100 farms per annum was 34.7. An examination of hospital discharge data for NSW was undertaken for the period 1 July 1992 to 30 June 2000 where the location of the injury was a farm. Classification of cases in this dataset conformed to the International Classification of Disease (ICD) versions 9 and 10. There were 14,490 people who were injured on a farm during the study period. The three most common external causes of injury were motorcycles, animals being ridden and agricultural machinery. Children represented 17% of all farm injury cases. The rate per 1,000 farms ranged from 19 to 42 per annum. An examination of Workers’ Compensation claims for agricultural industries in NSW between 1 July 1992 and 30 June 2001 was undertaken. The ‘Type of Occurrence’ classification system was used to code the claims. There were 24,332 claims of which the majority were males (82%). The incidence of injury / disease in agriculture per annum varied from 37 per 1,000 workers to 73 per 1,000 workers. The rate per 1,000 agricultural establishments varied from 54 to 76. The average cost of a claim was $10,880 and the average time lost per claims was 9.2 weeks. There were 81 deaths and 3,158 permanent disabilities. The three most common agents were sheep / goats (5%), ferrous and non-ferrous metals (5%), crates / cartons / boxes / etc (5%). Using ABS deaths data to examine the deaths of people working and living on farms was limited to males whose occupation was recorded as ‘farmer and farm manager’ and ‘agricultural labourer and related worker’. There were 952 deaths over the period 1 January 1991 and 31 December 2000. The information provided a consistent series of cases over time. Areas where prevention should be directed included motor vehicle accidents; falls; agricultural machinery; other machinery; firearms; poisoning; and drowning. Using any one of the datasets alone to examine people injured on farms not only underestimates the number of people injured, but also misses particular types of agents involved in farm injuries. Each of the datasets used in this Thesis provides a different perspective of farm injury in NSW. By examining the information together, there are a number of areas which are consistently represented in each dataset such as falls and agricultural machinery. While no one dataset provided all the information that would be useful for the prevention of injuries, the available information does provide direction for the development of prevention strategies. The overall weakness of the information provided is that it misses a number of risk factors that contribute to farm injuries such as fatigue and training. The lack of appropriate denominator information also makes it difficult to directly compare the datasets and estimate the size of the problem. There are a number of additional coding categories that could be included in each dataset that would provide a better understanding of the different groups at risk of sustaining an injury on a farm or during agricultural work. These coding categories include activity at time of injury, admission to hospital, and occupation. An example of the use of data to determine the effectiveness of a farm injury prevention program is the ‘NSW Rollover Protective Structure (ROPS) Rebate Scheme’ evaluation. Tractor rollover deaths have been identified as an issue for prevention by Farmsafe Australia; however, such deaths were not identified in any of the datasets used in this Thesis due to coding limitations in the ABS data. In this Thesis information about the evaluation of the ‘NSW ROPS Rebate Scheme’ is presented. The scheme was successful in fitting 10,449 ROPS to tractors and the following lessons were learnt: when providing a rebate, the administration (i.e. sending the cheque) needs to be done well; advertising is important and should be co-ordinated, increase the awareness of the risk(s) the intervention is aiming to prevent and effectiveness of subsequent solution (s); the program should ensure there is an increased awareness of the outcome the intervention is aiming to prevent; if regulation is part of the program, enforcement needs to undertaken; and should address any barriers to uptake. The information provided in this Thesis highlights the substantial burden that farm injury places on the agricultural and rural sector of NSW. While there is no one data source that can describe the circumstances and the burden of farm injuries, the currently available datasets do provide an insight into the circumstances of farm injuries and the burden these injuries place on health, Workers’ Compensation, agricultural industries and farming families.

This paper examined the critical factors and potential predictors necessary for successful admission to dental school for students participating in the credential enhancing Oral Health Sciences (OHS) master’s program at Boston University. The academic parameters of OHS-DMD and traditional (four year) college graduate DMD students were compared to determine if OHS graduates performed at a comparable academic level in dental school as DMD students who entered dental school without completing a credential enhancing master’s program. To accomplish this, we examined data from students who matriculated to the Oral Health Sciences program from 2006 to 2015 and collected demographic, undergraduate grade point average (GPA), dental admissions test (DAT) scores and Oral Health Sciences GPA from Admissions and Registrar records for our analyses. To compare dental school performance and success on national board exams we obtained data for both OHS-DMD and traditional DMD students who enter the Boston University Goldman School of Dental Medicine. We performed unpaired T-tests to evaluate differences in undergraduate GPA, DAT and OHS GPA data for those OHS students matriculating to any dental school to determine what criteria, if any, can be used to predict success. We found that two factors were significant in determining acceptance to dental school: the Oral Health Sciences GPA (3.501 ± 0.301 vs 2.914 ± 0.336, p <0.0001*) and DAT scores (18.380 ± 2.089 vs 17.231 ± 1.833, p= 0.0365*). Comparison of academic performance between DMD and OHS-DMD at BU dental school found that students perform equally as well in Year 1 but dropped lower in Year 2 when comparing GPA (3.40 ± 0.052 vs 3.290 ± 0.259*, p=0.043). Lastly, first attempt fail rates on national board examinations (8.3% + 4.78 vs 7.4% + 5.1, p=0.024) between traditional DMD and OHS-DMD students were reduced however retake pass rates were equivalent (p=0.120). These studies demonstrate that both OHS-GPA and DAT scores are significant factors in successful admission to dental school for those who had been unable to gain acceptance without the credential enhancing master’s program. Additionally, students performing well in the Oral Health Sciences program matriculate to dental school and are nearly as successful academically and on board exams as traditional four-year students DMD. Lastly, in keeping with the original mission of the OHS program, we have been largely successful in allowing underachieving and/or underrepresented minority and socioeconomically disadvantaged students to gain acceptance dental school.

Esta tese contempla a avaliação de maturidade, a metodologia Seis Sigma e a gestão da Segurança e Saúde no Trabalho (SST). Teve-se como objetivo geral propor e desenvolver um modelo para a avaliação e ações de melhoria na gestão da SST, sustentando-se nos conceitos provenientes essencialmente da avaliação de maturidade e da metodologia Seis Sigma. Este objetivo foi alcançado por meio de atividades de levantamento, análise e classificação do referencial bibliográfico pertinente; aplicação de um survey; construção de um modelo tendo em conta os resultados do survey e a base teórica analisada; entrevistas complementadas pela decorrente análise de conteúdo. Como resultados do levantamento bibliográfico, verificou-se uma predominância de técnicas com foco em ações pontuais quando se pretende buscar melhorias na área. Em termos de avaliação de maturidade, identificou-se que predomina ainda a concepção de modelos com cinco níveis de maturidade, que os modelos são normalmente estruturados por meio de grades de maturidade, e ainda, que são pouco freqüentes as aplicações para fins de avaliação na área de SST. Mostrou-se relevante o uso de características organizacionais como, por exemplo, a existência de serviços internos de SST e de certificações na área, setor de atividade econômica ou quantidade de subcontratados, para diferenciar cada unidade organizacional quanto a sua dificuldade em mudar o nível de desempenho na gestão da SST. Isso auxilia na avaliação e tratamento diferenciado dos problemas ou oportunidades, principalmente no que tange às práticas de gestão. Também, comprovou-se junto aos responsáveis pela gestão da SST em empresas de referência, que o modelo proposto e disponibilizável por meio da internet, é exeqüível e de fácil aceitabilidade. Além disso, ele poder ser utilizado remotamente, apresenta simplicidade de uso, interface amigável e a possibilidade de comparar empresas semelhantes, sem fornecer dados de acidentes ou doenças ocupacionais, ou ainda informações que identifiquem claramente a unidade organizacional. / This thesis addresses the Maturity Evaluation, the Six Sigma methodology and the Occupational Health and Safety (OHS) Management system. The main goal of this thesis was to develop a model for the assessment of the OHS management system and corresponding improvement actions, sustained by concepts derived mainly from the Maturity Evaluation process and Six Sigma methodology. This goal was achieved through the review, analysis and classification of the relevant bibliographic references on the specific topics, the implementation of a survey and the construction of a model in view of the results of the survey, of the reviewed theoretical framework and of the interviews complemented by the corresponding content analysis. As a result of the literature review, it was possible to verify that there is a predominance of techniques focused on specific and isolated actions, aiming to implement some improvements in the area. In what concerns the Maturity Evaluation, it was identified that there is a predominance of models based on five maturity levels, that these models are typically structured by maturity grids, as well as that OHS maturity evaluation models are scarce. Some organizational characteristics, such as the existence of OHS internal services, existent management systems certifications, the activity sector or the quantity of subcontracted employees, have come to play a relevant role in distinguishing the organisational unit and the corresponding effort needed to change their performance level regarding the OSH management system. The identification of this organisational profile will aid in the differential evaluation and treatment of the problems or opportunities regarding management practices in particular. Taking into consideration the opinion of OHS managers from some reference companies, it was also demonstrated that the proposed model, which is available online, is feasible and easily acceptable. Furthermore, the model, which can be used at a distance, is easy to use, has a user-friendly interface and allows for the comparison of similar companies without needing to provide details regarding company records on accidents, professional diseases or other information that clearly identifies the organisational unit.

Esta tese contempla a avaliação de maturidade, a metodologia Seis Sigma e a gestão da Segurança e Saúde no Trabalho (SST). Teve-se como objetivo geral propor e desenvolver um modelo para a avaliação e ações de melhoria na gestão da SST, sustentando-se nos conceitos provenientes essencialmente da avaliação de maturidade e da metodologia Seis Sigma. Este objetivo foi alcançado por meio de atividades de levantamento, análise e classificação do referencial bibliográfico pertinente; aplicação de um survey; construção de um modelo tendo em conta os resultados do survey e a base teórica analisada; entrevistas complementadas pela decorrente análise de conteúdo. Como resultados do levantamento bibliográfico, verificou-se uma predominância de técnicas com foco em ações pontuais quando se pretende buscar melhorias na área. Em termos de avaliação de maturidade, identificou-se que predomina ainda a concepção de modelos com cinco níveis de maturidade, que os modelos são normalmente estruturados por meio de grades de maturidade, e ainda, que são pouco freqüentes as aplicações para fins de avaliação na área de SST. Mostrou-se relevante o uso de características organizacionais como, por exemplo, a existência de serviços internos de SST e de certificações na área, setor de atividade econômica ou quantidade de subcontratados, para diferenciar cada unidade organizacional quanto a sua dificuldade em mudar o nível de desempenho na gestão da SST. Isso auxilia na avaliação e tratamento diferenciado dos problemas ou oportunidades, principalmente no que tange às práticas de gestão. Também, comprovou-se junto aos responsáveis pela gestão da SST em empresas de referência, que o modelo proposto e disponibilizável por meio da internet, é exeqüível e de fácil aceitabilidade. Além disso, ele poder ser utilizado remotamente, apresenta simplicidade de uso, interface amigável e a possibilidade de comparar empresas semelhantes, sem fornecer dados de acidentes ou doenças ocupacionais, ou ainda informações que identifiquem claramente a unidade organizacional. / This thesis addresses the Maturity Evaluation, the Six Sigma methodology and the Occupational Health and Safety (OHS) Management system. The main goal of this thesis was to develop a model for the assessment of the OHS management system and corresponding improvement actions, sustained by concepts derived mainly from the Maturity Evaluation process and Six Sigma methodology. This goal was achieved through the review, analysis and classification of the relevant bibliographic references on the specific topics, the implementation of a survey and the construction of a model in view of the results of the survey, of the reviewed theoretical framework and of the interviews complemented by the corresponding content analysis. As a result of the literature review, it was possible to verify that there is a predominance of techniques focused on specific and isolated actions, aiming to implement some improvements in the area. In what concerns the Maturity Evaluation, it was identified that there is a predominance of models based on five maturity levels, that these models are typically structured by maturity grids, as well as that OHS maturity evaluation models are scarce. Some organizational characteristics, such as the existence of OHS internal services, existent management systems certifications, the activity sector or the quantity of subcontracted employees, have come to play a relevant role in distinguishing the organisational unit and the corresponding effort needed to change their performance level regarding the OSH management system. The identification of this organisational profile will aid in the differential evaluation and treatment of the problems or opportunities regarding management practices in particular. Taking into consideration the opinion of OHS managers from some reference companies, it was also demonstrated that the proposed model, which is available online, is feasible and easily acceptable. Furthermore, the model, which can be used at a distance, is easy to use, has a user-friendly interface and allows for the comparison of similar companies without needing to provide details regarding company records on accidents, professional diseases or other information that clearly identifies the organisational unit.

Esta tese contempla a avaliação de maturidade, a metodologia Seis Sigma e a gestão da Segurança e Saúde no Trabalho (SST). Teve-se como objetivo geral propor e desenvolver um modelo para a avaliação e ações de melhoria na gestão da SST, sustentando-se nos conceitos provenientes essencialmente da avaliação de maturidade e da metodologia Seis Sigma. Este objetivo foi alcançado por meio de atividades de levantamento, análise e classificação do referencial bibliográfico pertinente; aplicação de um survey; construção de um modelo tendo em conta os resultados do survey e a base teórica analisada; entrevistas complementadas pela decorrente análise de conteúdo. Como resultados do levantamento bibliográfico, verificou-se uma predominância de técnicas com foco em ações pontuais quando se pretende buscar melhorias na área. Em termos de avaliação de maturidade, identificou-se que predomina ainda a concepção de modelos com cinco níveis de maturidade, que os modelos são normalmente estruturados por meio de grades de maturidade, e ainda, que são pouco freqüentes as aplicações para fins de avaliação na área de SST. Mostrou-se relevante o uso de características organizacionais como, por exemplo, a existência de serviços internos de SST e de certificações na área, setor de atividade econômica ou quantidade de subcontratados, para diferenciar cada unidade organizacional quanto a sua dificuldade em mudar o nível de desempenho na gestão da SST. Isso auxilia na avaliação e tratamento diferenciado dos problemas ou oportunidades, principalmente no que tange às práticas de gestão. Também, comprovou-se junto aos responsáveis pela gestão da SST em empresas de referência, que o modelo proposto e disponibilizável por meio da internet, é exeqüível e de fácil aceitabilidade. Além disso, ele poder ser utilizado remotamente, apresenta simplicidade de uso, interface amigável e a possibilidade de comparar empresas semelhantes, sem fornecer dados de acidentes ou doenças ocupacionais, ou ainda informações que identifiquem claramente a unidade organizacional. / This thesis addresses the Maturity Evaluation, the Six Sigma methodology and the Occupational Health and Safety (OHS) Management system. The main goal of this thesis was to develop a model for the assessment of the OHS management system and corresponding improvement actions, sustained by concepts derived mainly from the Maturity Evaluation process and Six Sigma methodology. This goal was achieved through the review, analysis and classification of the relevant bibliographic references on the specific topics, the implementation of a survey and the construction of a model in view of the results of the survey, of the reviewed theoretical framework and of the interviews complemented by the corresponding content analysis. As a result of the literature review, it was possible to verify that there is a predominance of techniques focused on specific and isolated actions, aiming to implement some improvements in the area. In what concerns the Maturity Evaluation, it was identified that there is a predominance of models based on five maturity levels, that these models are typically structured by maturity grids, as well as that OHS maturity evaluation models are scarce. Some organizational characteristics, such as the existence of OHS internal services, existent management systems certifications, the activity sector or the quantity of subcontracted employees, have come to play a relevant role in distinguishing the organisational unit and the corresponding effort needed to change their performance level regarding the OSH management system. The identification of this organisational profile will aid in the differential evaluation and treatment of the problems or opportunities regarding management practices in particular. Taking into consideration the opinion of OHS managers from some reference companies, it was also demonstrated that the proposed model, which is available online, is feasible and easily acceptable. Furthermore, the model, which can be used at a distance, is easy to use, has a user-friendly interface and allows for the comparison of similar companies without needing to provide details regarding company records on accidents, professional diseases or other information that clearly identifies the organisational unit.

This diploma thesis focuses on the evaluation and minimization of risks in the area of occupational health and safety (OSH), specifically on risks in the construction industry. The analysis of the current state evaluates the issue of current OSH from the European and national point of view, defines terms and contains basic principles of safe work with construction machines. The main task of this work is to analyze the risk associated with the performed activity on a model example and propose suitable measures for their minimization including financial evaluation.

The diploma thesis is focused on the issues of handling heavy loads using a crane. The thesis tries to identify threats in the process. Analysis of the current state evaluates the issue from the perspective of OHS not only in the Czech Republic but also in selected states of the European Union. Furthermore, the analysis discusses the obligations of employees and employers in the field of safety and clarifies the basic concepts of the issue. Based on a model example, the analyzes are performed to that identify the threats with the highest level of risk Subsequently, there are presented measures which should lead to the minimization of the level of risk for identified process threats.

This master`s thesis deals with a hazard analysis of selected machinery according to an actual legislative documents in Slovakia, which were taken over from Europien Union directives. The thesis is focused on exploring legislation related to the safety of toolroom workshop in the Czech Republic and Germany. Because of that was done the recherché of harmonized standards in these countries. Subsequently is made the identification of hazards under recherched standards and assessment of control system based on the performance level of the system. In the end are all obtained data evaluated and the precautionary measures are suggested. With taking care of economic factors are finally proposed the possibilities of the elimination of risks.