No description available.

Wind energy, the fastest growing source of renewable energy, is a promising resource for power generation. Offshore wind energy, in particular,offers favorable conditions for power generation—high winds with low turbulence, minimal visual impacts and high generation capacities. Offshore wind turbines mounted on floating platforms are the most economical and viable solution for deep water sites. A semi-submersible platform is an appropriate floating platform for a deep water site, providing stability through high water-plane area. In the wind energy industry, there has been continuing interest in developing larger turbines. At Sandia National Laboratories (SNL), efforts have led to the development of a 13.2 MW wind turbine model with blades 100 meters in length, significantly larger than commercially available blades at present. Such a large wind turbine needs to be carefully analyzed and studied before it can be considered suitable for commercial purposes. The dynamic analysis of the SNL 13.2 MW wind turbine mounted on a moored semi-submersible platform is the subject of this study. This integrated 13.2 MW wind turbine system has been developed and its various physical properties have been studied in this and another associated study. The semi-submersible platform is developed using various modeling tools. For the wind turbine-platform system model developed, dynamic analyses are performed using simulation tools to understand the coupled behavior of the wind turbine and the platform. A reference site is chosen to define the environmental conditions, based on which the short-term extreme response of the offshore wind turbine is estimated. The system is loaded with selected combinations of winds and waves to assess controlling combinations of wind speeds and wave heights that influence the response. The influence of changes in model parameters on overall response is also studied. / text

For an offshore platform structure applied to wave-energy conversion system, in order to catch the maximum waves to generate more powers, similar to wind-energy power generators, a range of angles for the devices normal to the propagating direction of incident waves is required, particularly when the power converting system has directional preference. In this study, an electro-magnetic wave energy conversion device was developed and tested in a single-mooring offshore platform system. In order to find the best design parameters for the electro-magnetic generators system in various wave periods a water-tank experiment was designed and performed. During the experimental study, both wave parameters and dimensional related parameter of the generator were under investigation. It was found in this study that the newly developed wave conversion system can work well under certain periods and height of waves. The relationships between the parameter were presented into figures.

For an offshore platform structure applied to wave-energy conversion system, in order to catch the maximum waves to generate more powers, similar to wind-energy power generators, a range of angles for the devices normal to the propagating direction of incident waves is required, particularly when the power converting system has directional preference. That is one essential reason why a single mooring offshore platform system is so important in the development of an offshore wave-energy conversion system. The single mooring-system would allow the offshore wave-energy conversion system to turn freely in accordance to the action of strong directions of propagating waves and in this way, most energy induced from the incident waves can be caught and converted into reusable powers. The aims of this study are firstly, based on previous studies to further modify a single moored offshore platform system that may subject to less wave forces in the sea and, secondly, to verify the efficiency of single-moored system by carrying out an experimental testing on a simple single-moored floating platform system in the water tank.

Offshore oil platforms are used for the exploitation and production of hydrocarbons and consist of a processing plant and a utility plant. The oil and gas industry operations are energy-intensive and, in the case of offshore platforms, the need to decrease energy consumption and reduce CO2 emissions has increased. In the oil and gas industry, the ISO 50001 standard promotes the implementation of energy management systems and proposes indicators based on energy. Interestingly, after several decades of knowledge of the concept of exergy, this has not been formally implemented in the programs and strategies of the oil and gas industry organizations. In this research, the implementation of the exergy method and the carbon capture and storage strategy for the assessment of the performance of a floating, production and storage offloading units FPSO is proposed. FPSO platforms and their processing and utility plants may have different configurations depending on, among others, the reservoir characteristics and production requirements. The possible configurations can therefore be numerous. In this sense, some operation scenarios based on different well-fluid compositions and operation modes are studied. The platform models are developed and simulated using the software Aspen HYSYS®. Results show that, on average, the reduction of 88.8% in CO2 emissions is penalized with a reduction in exergy efficiency of 1.7 points. Further, results allow a better understanding of exergy and environmental performance of the FPSO. / Plataformas de petróleo offshore são utilizadas para a exploração e produção de hidrocarbonetos e consistem em uma planta de processamento e uma planta de utilidade. As operações da indústria de petróleo e gás são de energia intensiva e, no caso de plataformas offshore, é necessário cada vez mais diminuir o consumo de energia e reduzir as emissões de CO2. Na indústria de petróleo e gás, a norma ISO 50001 promove a implementação de sistemas de gestão de energia e propõe indicadores baseados em energia. Entretanto, após várias décadas de conhecimento do conceito de exergia, este não foi formalmente implementado nos programas e estratégias das organizações da indústria de petróleo e gás. Neste trabalho, propõe-se a implementação da análise exergética e a estratégia de captura e armazenamento de carbono para a avaliação do desempenho de unidades flutuantes, de produção, de armazenamento e transferência FPSO. As plataformas FPSO e suas plantas de processamento e utilidade podem ter diferentes configurações dependendo, entre outras, das características do reservatório e dos requisitos de produção. As configurações possíveis podem, portanto, ser numerosas. Neste sentido, são estudados alguns cenários de operação baseados em diferentes composições dos fluidos do poço e em três modos de operação. Os modelos de plataforma são desenvolvidos e simulados usando o software Aspen HYSYS®. Os resultados mostram que, em média, a redução de 88,8% nas emissões de CO2 é penalizada com uma redução da eficiência exergética de 1,7 pontos. Além disso, os resultados permitem uma melhor compreensão da exergia e desempenho ambiental do FPSO.

Offshore oil platforms are used for the exploitation and production of hydrocarbons and consist of a processing plant and a utility plant. The oil and gas industry operations are energy-intensive and, in the case of offshore platforms, the need to decrease energy consumption and reduce CO2 emissions has increased. In the oil and gas industry, the ISO 50001 standard promotes the implementation of energy management systems and proposes indicators based on energy. Interestingly, after several decades of knowledge of the concept of exergy, this has not been formally implemented in the programs and strategies of the oil and gas industry organizations. In this research, the implementation of the exergy method and the carbon capture and storage strategy for the assessment of the performance of a floating, production and storage offloading units FPSO is proposed. FPSO platforms and their processing and utility plants may have different configurations depending on, among others, the reservoir characteristics and production requirements. The possible configurations can therefore be numerous. In this sense, some operation scenarios based on different well-fluid compositions and operation modes are studied. The platform models are developed and simulated using the software Aspen HYSYS®. Results show that, on average, the reduction of 88.8% in CO2 emissions is penalized with a reduction in exergy efficiency of 1.7 points. Further, results allow a better understanding of exergy and environmental performance of the FPSO. / Plataformas de petróleo offshore são utilizadas para a exploração e produção de hidrocarbonetos e consistem em uma planta de processamento e uma planta de utilidade. As operações da indústria de petróleo e gás são de energia intensiva e, no caso de plataformas offshore, é necessário cada vez mais diminuir o consumo de energia e reduzir as emissões de CO2. Na indústria de petróleo e gás, a norma ISO 50001 promove a implementação de sistemas de gestão de energia e propõe indicadores baseados em energia. Entretanto, após várias décadas de conhecimento do conceito de exergia, este não foi formalmente implementado nos programas e estratégias das organizações da indústria de petróleo e gás. Neste trabalho, propõe-se a implementação da análise exergética e a estratégia de captura e armazenamento de carbono para a avaliação do desempenho de unidades flutuantes, de produção, de armazenamento e transferência FPSO. As plataformas FPSO e suas plantas de processamento e utilidade podem ter diferentes configurações dependendo, entre outras, das características do reservatório e dos requisitos de produção. As configurações possíveis podem, portanto, ser numerosas. Neste sentido, são estudados alguns cenários de operação baseados em diferentes composições dos fluidos do poço e em três modos de operação. Os modelos de plataforma são desenvolvidos e simulados usando o software Aspen HYSYS®. Os resultados mostram que, em média, a redução de 88,8% nas emissões de CO2 é penalizada com uma redução da eficiência exergética de 1,7 pontos. Além disso, os resultados permitem uma melhor compreensão da exergia e desempenho ambiental do FPSO.