Spelling suggestions: "subject:"oligomeric silsesquioxane"" "subject:"oligomerica silsesquioxane""
1 |
Functionalized polyhedral oligomeric silsesquioxane (POSS) for incorporation of chemically pendant chains = Utilização de silsesquioxanos oligoméricos poliédricos funcionalizados (POSS) no ancoramento de cadeias orgânicas à superfície / Utilização de silsesquioxanos oligoméricos poliédricos funcionalizados (POSS) no ancoramento de cadeias orgânicas à superfícieRiaz, Ali, 1981- 25 August 2018 (has links)
Orientador: José de Alencar Simoni / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Química / Made available in DSpace on 2018-08-25T07:32:13Z (GMT). No. of bitstreams: 1
Riaz_Ali_D.pdf: 5855772 bytes, checksum: b17d5626ad22333e3c2a8cff516ddc1a (MD5)
Previous issue date: 2014 / Resumo: Este trabalho apresenta a síntese e caracterização de compostos silsesquioxanos gaiola cúbica (POSS) com cadeias orgânicas pendentes. O projeto foi iniciado com a idéia de sintetizar os silsesquioxanos cúbicos com cadeias organofuncionalizadas ancoradas, capazes de capturar os metais pesados, corantes e CO2. Mas foram enfrentadas algumas dificuldades como baixo rendimento (30-37%) e longo tempo de reação (5-35 dias). As reações foram investigadas para melhorar o rendimento, bem como para reduzir o tempo de reação. Algumas modificações em rotas de reação foram introduzidas, o que trouxe melhorias notáveis nos resultados, onde o rendimento aumentou cerca de 64 % e o tempo de reação foi reduzido para 24 horas em média. Na sequência, os produtos sintetizados foram caracterizados para elucidar suas estruturas, utilizando diferentes técnicas físicas tais como FTIR, CHN, XRD, MEV, TGA, 13CNMR e 29SiNMR no estado sólido, onde as gaiolas Si-O de todos os compostos foram evidenciadas por meio de 29SiRMN e dos seus espectros de FTIR, enquanto as cadeias ancorados às gaiolas de POSS foram confirmadas utilizando os resultados de 13CRMN, juntamente com seus respectivos espectros de FTIR. Os compostos sintetizados também foram testados quanto à sua estabilidade térmica utilizando a técnica de TGA. Após a otimização da síntese de silsesquioxanos cúbicos, os híbridos PAA-13-3, PAA-MTC e PAA-Ph foram avaliados por suas habilidades de captação de cátions bivalentes, tais como Cu2+, Cd2+ e Pb2+ de suas soluções aquosas, sendo que o Cu2+ apresentou maior afinidade de sorção em relação aos dois metais. Estes sistemas de sorção foram analisados através ICP-OES. Para explicar o comportamento de sorção destas amostras alguns modelos estatísticos como Langmuir, Freundlich, Temkin e Redlich-Peterson foram aplicadas, onde os dados de sorção de Cu2+ em PAA-13-3 foram melhor ajustados pelo modelo Langmuir, mostrando ser uma sorção monocamada, enquanto que no caso do PAA-MTC e PAA-Ph modelo de melhor ajuste foi o Freundlich, confirmando a sorção de múlti camadas. Um dos materiais sintetizados (PAA-13-3) foi avaliado quanto à sua capacidade de adsorver CO2 gasoso, mostrando-se promissor na remoção de CO2, mesmo a baixas pressões (máx. 100 mm Hg). A adsorção de CO2 no material também foi estudada por calorimetria de adsorção gás-sólido, em um calorímetro especialmente desenvolvido para tal, observando-se valores de entalpia de adsorção entre -36 e -7 kJ mol-1 / Abstract: This report presents the synthesis and characterization of POSS compounds having cubic silsesquioxane cage to which the organic pendant chains are anchored. The project was started with the idea to synthesize the cubic silsesquioxanes with organofunctionalized pendant chains, which are able to capture heavy metals, dyes and some acids like CO2. But in the beginning the hurdles like low % yields (30-37 %) and long reaction times (5-35 days) were to be faced. The reactions were worked out to enhance the % yields as well as to reduce the reaction time. Some modifications in reaction routes have been introduced, which brought up remarkable improvements in the results, where yield was increased upto 64 % and reaction time was reduced to 1 day. All the synthesized products were then characterized for their structure elucidations using different physical techniques like FTIR, CHN, TGA, 13CNMR & 29SiNMR in solid state, where Si¿O cages of all compounds were elaborated through 29Si-NMR in solid state as well as through their respective FTIR patterns, while the pendant chains anchored to the POSS cages were confirmed using 13C-NMR results along with their respective FTIR spectra. The synthesized compounds were then tested for their thermal stability using the TGA technique. After optimizing the synthesis of cubic silsesquioxanes, hybrids PAA-13-3, PAA-MTC and PAA-Ph were worked out for their abilities of capturing divalent cations like Cu2+, Cd2+ and Pb2+ from their aqueous solutions, where Cu2+ showed higher affinity of sorption than other two bivalent metals. These sorption systems were analyzed using the ICP-OES. To explain the sorption behaviour of these samples some statistical models like Langmuir, Freundlich, Sips, Temkin and Redlich-Peterson were applied to the sorption data, where the data for Cu2+ on to PAA-13-3 was best fitted by Langmuir adsorption isotherm model showing the sorption to be monolayer, while in case of PAA-MTC and PAA-Ph Freundlich model was found to be a best fit, confirming multilayer sorption. One of the synthesized materials (PAA-13-3) was also evaluated for its ability to adsorb gaseous CO2 and was proved to be promising in removing CO2, even at low pressures (max. 100 mmHg). The adsorption of CO2 in the material is also studied by solid-gas adsorption calorimetry through a calorimeter especially developed for this system, where enthalpy of adsorption values were found to be between -7 and -36 kJ mol-1 / Doutorado / Quimica Inorganica / Doutor em Ciências
|
2 |
Structure Property Relationships in Polymer Blends and Composites. Part I - Polymer/POSS Composites Part II - Poly(ethylene terepthalate) ionomer/Polyamide 6 Blends Part III - Elastomer/Boron Nitride CompositesIyer, Subramanian 06 July 2006 (has links)
No description available.
|
3 |
Molecular Shape Amphiphile Based on Keggin Polyoxometalates and iso-Butyl Polyhedral Oligomeric Silsesquioxanes: Synthesis and CharacterizationShan, Wenpeng 17 September 2014 (has links)
No description available.
|
4 |
Nanostructuration of epoxy networks by using polyhedral oligomeric silsesquioxanes POSS and its copolymersChen, Jiang Feng 08 June 2012 (has links) (PDF)
A series of hybrid component based on reactive polyhedral oligomeric silsesquioxane(POSS) precusors and its reactive copolymers of PGMA were synthesized and utilized to nanobuild in epoxy. Reactive POSS and copolymer dispersed in homogenous in matrix, overcomed POSS-POSS interaction, which resulted in macroscale phase separation. The nanocomposites obtained were analyzed by Scanning electron microscopy, Transmission electron microscopy, X-ray scattering and dynamic mechanical. An analogue of POSS (denoted as POSSMOCA) was synthesized via addition reaction, which had reactive amino group bonding into epoxy network and improved the thermostability, because of the structural silicon, nitrogen and halogen. Epoxy/polyhedral oligomeric silsesquioxanes (POSS) hybrid composites were prepared from prereaction between trifunctional silanol POSS-OH and diglycidyl ether of bisphenol A (DGEBA) via silanol and the oxirane group. Reactive POSS-PGMA was polymerized via Reversible addition-fragmentation transfer polymerization. It was easy to tail the compatibility of the epoxide block copolymer with a step-growth polymerized matrix, to form nanostructure via reaction with PGMA segements. In the case of inert POSS-PMMA copolymers modified epoxy, topology of copolymer defined the final morphology and interaction between epoxy and them, because of directional hydrogen bonding and dilution effect. Tg of different epoxide conversion, obeyed of Gordon-Taylor equation and Kwei equation, k which reflected the interaction of modifier and DGEBA/MEDA and epoxy/amine oligomers, was consistent of the rheology and dynamic results.
|
5 |
Giant Shape Amphiphiles Based on Polyoxometalates (POMs)-Polyhedra Oligomeric Silsesquioxane (POSS) Hybrids: Synthesis and CharacterizationJiang, Jing 07 June 2013 (has links)
No description available.
|
6 |
Synthesis of Polyhedral Oligomeric Silsesquioxane(POSS)-Based Shape Amphiphiles with Two Polymeric Tails of Symmetric or Asymmetric CompositionsWang, Zhao 03 June 2013 (has links)
No description available.
|
7 |
Giant Molecular Shape Amphiphiles Based on Polyhedral Oligomeric Silsesquioxanes: Molecular Design, "Click" Synthesis and Self-AssemblyLi, Yiwen 29 August 2013 (has links)
No description available.
|
8 |
Optical and thermal characteristics of thin polymer and polhedral oligomeric silsesquioxane (POSS) filled polymer filmsKarabiyik, Ufuk 06 June 2008 (has links)
Single wavelength ellipsometry measurements at Brewster's angle provide a powerful technique for characterizing ultrathin polymeric films. By conducting the experiments in different ambient media, multiple incident media (MIM) ellipsometry, simultaneous determinations of a film's thickness and refractive index are possible. Poly(tert-butyl acrylate) (PtBA) films serve as a model system for the simultaneous determination of thickness and refractive index (1.45 at 632 nm). Thickness measurements on films of variable thickness agree with X-ray reflectivity results. The method is also applicable to spincoated films where refractive indices of PtBA, polystyrene and poly(methyl methacrylate) are found to agree with literature values within experimental error. Likewise, MIM ellipsometry is utilized to simultaneously obtain the refractive indices and thicknesses of thin films of trimethylsilylcellulose (TMSC), regenerated cellulose, and cellulose nanocrystals where Langmuir-Blodgett (LB) films of TMSC serve as a model system.
Ellipsometry measurements not only provide thickness and optical constants of thin films, but can also detect thermally induced structural changes like surface glass transition temperatures (Tg) and layer deformation in LB-films. Understanding the thermal properties of the polymer thin films is crucial for designing nanoscale coatings, where thermal properties are expected to differ from their corresponding bulk properties because of greater fractional free volume in thin films and residual stresses that remain from film preparation. Polyhedral oligomeric silsesquioxane (POSS) derivatives may be useful as a nanofiller in nanocomposite formulations to enhance thermal properties. As a model system, thin films of trisilanolphenyl-POSS (TPP) and two different molar mass PtBA were prepared as blends by Y-type Langmuir-Blodgett film deposition. For comparison, bulk blends were prepared by solution casting and the samples were characterized via differential scanning calorimetry (DSC). Our observations show that surface Tg is depressed relative to bulk Tg and that magnitude of depression is molar mass dependent for pure PtBA films. By adding TPP as a nanofiller both bulk and surface Tg increase. Whereas, bulk Tg shows comparable increases for both molar masses, the increase in surface Tg for higher molar mass PtBA is greater than for lower molar mass PtBA. These studies show that POSS can serve as a model nanofiller for controlling Tg in nanoscale coatings. / Ph. D.
|
9 |
Stability and Morphological Evolution in Polymer/Nanoparticle Bilayers and Blends Confined to Thin Film GeometriesPaul, Rituparna 13 September 2007 (has links)
Thin film bilayers and blends composed of polymers and nanoparticles are increasingly important for technological applications that range from space survivable coatings to novel drug delivery systems. Dewetting or spontaneous hole formation in amorphous polymer films and phase separation in multicomponent polymer films can hinder the stability of these systems at elevated temperatures. Hence, fundamental understanding of dewetting and phase separation in polymer/nanoparticle bilayer and blend films is crucial for controlling transport and thermomechanical properties and surface morphologies of these systems. This dissertation provides studies on morphological evolution driven by phase separation and/or dewetting in model polymer/nanoparticle thin film bilayers and blends at elevated temperatures.
Morphological evolution in dewetting bilayers of poly(t-butyl acrylate) (PtBA) or polystyrene (PS) and a polyhedral oligomeric silsesquioxane (POSS), trisilanolphenyl-POSS (TPP) is explored at elevated temperatures. The results demonstrate unique dewetting morphologies in both PtBA/TPP and PS/TPP bilayers that are significantly different from those typically observed in dewetting polymer/polymer bilayers. Upon annealing the PtBA/TPP bilayers at 95°C, a two-step dewetting process is observed. PtBA immediately diffuses into the upper TPP layer leading to hole formation and subsequently the holes merge to form interconnected rim structures in the upper TPP layer. Dewetting of both the TPP and PtBA layers at longer annealing times leads to the evolution of scattered holes containing TPP-rich, fractal aggregates. The fractal dimensions of the TPP-rich, fractal aggregates are ~2.2 suggesting fractal pattern formation via cluster-cluster aggregation. Dewetting in PS/TPP bilayers also proceeds via a two-step process; however, the observed dewetting morphologies are dramatically different from those observed in PtBA/TPP bilayers. Cracks immediately form in the upper TPP layer during annealing of PS/TPP bilayers at 200°C. With increasing annealing times, the cracks in the TPP layer act as nucleation sites for dewetting and aggregation of the TPP layer and subsequent dewetting of the underlying PS layer. Complete dewetting of both the TPP and PS layers results in the formation of TPP encapsulated PS droplets.
Phase separation in PtBA/TPP thin film blends is investigated as functions of annealing temperature and time. The PtBA/TPP thin film blend system exhibits an upper critical solution temperature (LCST) phase diagram with a critical composition and temperature of 60 wt% PtBA and ~70°C, respectively. Spinodal decomposition (SD) is observed for 60 wt% PtBA blend films and off-critical SD is seen for 58 and 62 wt% PtBA blend films. The temporal evolution of SD in 60 wt% PtBA blend films is also explored. Power law scaling for the characteristic wavevector with time (q ~ t^n with n = -1/4 to -1/3) during the early stages of phase separation yields to domain pinning at the later stages for films annealed at 75, 85, and 95°C. In contrast, domain growth is instantly pinned for films annealed at 105°C.
Our work provides an important first step towards understanding how nanoparticles affect polymer thin film stability and this knowledge may be utilized to fabricate surfaces with tunable morphologies via controlled dewetting and/or phase separation. / Ph. D.
|
10 |
Phase and Rheological Behavior of Langmuir Films at the Air/Water Interface: Polyhederal Oligomeric Silsesquioxanes (POSS), POSS/Polymer Blends, and Magnetic NanoparticlesYin, Wen 12 June 2009 (has links)
For over a century, Langmuir films have served as excellent two-dimensional model systems for studying the conformation and ordering of amphiphilic molecules at the air/water (A/W) interface. With the equipment of Wilhelmy plate technique, Brewster angle microscopy (BAM), and surface light scattering (SLS), the interfacial phase and rheological behavior of Langmuir films can be investigated. In this dissertation, these techniques are employed to examine Langmuir films of polyhedral oligomeric silsesquioxane (POSS), polymer blends, and magnetic nanoparticles (MNPs).
In a first time, SLS is employed to study POSS molecules. The interfacial rheological properties of trisilanolisobutyl-POSS (TiBuP) indicate that TiBuP forms a viscoelastic Langmuir film that is almost perfectly elastic in the monolayer state with a maximum dynamic dilational elasticity of around 50 mNâ m-1 prior to film collapse. This result suggests that TiBuP can serve as model nanofiller with polymers.
As an interesting next step, blends of TiBuP and polydimethylsiloxane (PDMS) with different compositions are examined via surface pressure (surface pressureâ surface area occupied per molecule (A) isotherms and SLS. The results show that TiBuP, with its attendant water, serves as a plasticizer and lowers the dilational modulus of the films at low surface pressure. As surface pressure increases, composition dependent behavior occurs. Around the collapse pressure of PDMS, the TiBuP component is able to form networks at the A/W interface as PDMS collapse into the upper layer. Blends of non-amphiphilic octaisobutyl-POSS (OiBuP) and PDMS are also studied as an interesting comparison to TiBuP/PDMS blends. In these blends, OiBuP serves as a filler and reinforces the blends prior to the collapse of PDMS by forming "bridge" structure on top of PDMS monolayer. However, OiBuP is non-amphiphilic and fails to anchor PDMS chains to the A/W interface. Hence, OiBuP/PDMS blends exhibit negligible dilational viscoelasticity after the collapse of PDMS.
Furthermore, the phase behavior of PDMS blended with a trisilanol-POSS derivative containing different substituents, trisilanolcyclopentyl-POSS (TCpP), is also investigated via the Wilhelmy plate technique and BAM. These TCpP/PDMS blends exhibit dramatically different phase behavior and morphological features from previously studied POSS/PDMS blends, showing that the organic substituents on trisilanol-POSS have considerable impact on the phase behavior of POSS/PDMS blends.
The interfacial rheological behavior of tricarboxylic acid terminated PDMS (PDMS-Stabilizer) and PDMS stabilized MNPs are investigated and compared with "regular" PDMS containing non-polar end groups. The tricarboxylic acid end group of the PDMS-Stabilizer leads to a different collapse mechanism. The PDMS stabilized MNPs exhibit viscoelastic behavior that is similar to PDMS showing all the tricarboxylic acid end groups are bound to the magnetite cores.
Studying the interfacial behavior of different Langmuir films at the A/W interface provides us insight into the impact of molecule-molecule and molecule-subphase interactions on film morphology and rheology. These results are able to serve as important guides for designing surface films with preferred morphological and mechanical properties. / Ph. D.
|
Page generated in 0.068 seconds