Thesis (MEng--Engineering) -- Auckland University of Technology, 2005. / Also held in print (xix, 157 leaves, col. ill., 30 cm.) in Wellesley Theses Collection. (T 668.4239 ABB)

M.Phil. (Optometry) / Significant vision impairment caused by uncorrected distance or near vision (at a level defined by The World Health Organization as a disability) affects over 600 million people globally (9% of the world’s population). Over 3.5 billion people (52% of the world’s population) need some form of vision correction to see clearly. By 2020, this number is projected to reach 6.1 billion, 66% of the world’s population. Vision impairment is an important issue affecting the everyday lives of these 3.5 billion people worldwide. Two thirds of those affected live in the less developed world where the majority do not have easy access to eye care, eye examinations and affordable spectacles. Purpose If an ametrope or presbyope pricks a small hole into a leaf, piece of paper or cardboard and looks through it, he or she will usually experience improved acuity providing there is no central cataract or any ocular pathology. Rural communities, who have no access to eye-care or vision specialists, with vision problems, may benefit from looking through a pinhole while looking far and near. Many who are longsighted or presbyopic, may have problems reading their Bibles for example. They may only have candles as a source of light at night. They could improve their vision by looking through a small hole while reading. The purpose of this study is to explore the possibility of such a simple and almost cost free device contributing to solving this need. Method Uncompensated (without the pinhole) near or proximal visual acuities (VAs) were measured and recorded on one eye of 45 presbyopic subjects over the age of 50 years in photopic (250 lux) and then scotopic (20 lux) conditions. There were 36 male and 9 female subjects. Their ages ranged between 50 and 74 years with an average of 59 (SD = ±7.52) years. The ambient room illumination for photopic conditions was measured using a Sekonic Lumi Model 246 light-meter. No visual or pathological conditions or requirements were set for the subjects. The subjects were asked to read the smallest letters on the near chart by moving their head closer ...

Typescript (photocopy). / Digitized by Kansas Correctional Industries

In this work a finite element model is proposed to describe the swelling of poly(acrylic acid) hydrogels under the influence of an external electric field. The specific application of this model is for optical applications, but the design could be used equally well for other applications such as sensors and actuators.The model is proposed as five individual modules, which work in conjunction with each other but which can also function independently. This independence allows the model to provide intermediate results to the user, and also permits each module to be improved or adjusted individually without affecting the operation of the overall model. The first module is the Electrical module, which calculates the external electric field present in the hydrogel by solving Laplace's equation. The second module is the Chemical module, which uses the electric field to calculate the diffusion and migration of ions through the hydrogel/solvent regions. The third module is the Force module, which uses the change in ion concentrations to calculate the resulting change in osmotic pressure (force). This force is then used in the Mechanical module to calculate the deformation of the hydrogel, based on the assumption of linear elasticity. Finally, the fifth module is the Optical module, which uses the deformation to calculate the theoretical change in focal length.To verify the operation of the model, numerous experiments were conducted with the deformation of a poly(acrylic acid) hydrogel being measured under various external voltages with different electrode configurations. Overall, the model agrees quite well with the experimental results, but also highlights some interesting discrepancies that will need to be considered in future work. There is also some scope for improvement in the experimental method used, but again this is left for future work.

In this work a finite element model is proposed to describe the swelling of poly(acrylic acid) hydrogels under the influence of an external electric field. The specific application of this model is for optical applications, but the design could be used equally well for other applications such as sensors and actuators.The model is proposed as five individual modules, which work in conjunction with each other but which can also function independently. This independence allows the model to provide intermediate results to the user, and also permits each module to be improved or adjusted individually without affecting the operation of the overall model. The first module is the Electrical module, which calculates the external electric field present in the hydrogel by solving Laplace's equation. The second module is the Chemical module, which uses the electric field to calculate the diffusion and migration of ions through the hydrogel/solvent regions. The third module is the Force module, which uses the change in ion concentrations to calculate the resulting change in osmotic pressure (force). This force is then used in the Mechanical module to calculate the deformation of the hydrogel, based on the assumption of linear elasticity. Finally, the fifth module is the Optical module, which uses the deformation to calculate the theoretical change in focal length.To verify the operation of the model, numerous experiments were conducted with the deformation of a poly(acrylic acid) hydrogel being measured under various external voltages with different electrode configurations. Overall, the model agrees quite well with the experimental results, but also highlights some interesting discrepancies that will need to be considered in future work. There is also some scope for improvement in the experimental method used, but again this is left for future work.

M. Phil. / Please refer to full text to view abstract / Prof. J.T. Ferreira

M.Phil. / Tinted spectacle lenses have long been worn to provide ocular protection from harmful electromagnetic radiation during recreational activities. Controversy exists surrounding the colour of the spectacle tints and the environmental conditions under which these tints are worn. There is little scientific evidence to substantiate the many opinions of authors on the effects of tinted spectacle lenses on visual skills and, ultimately, on overall performance in recreational situations. This study serves to provide scientific data concerning the effects of tinted lenses on static visual acuity, contrast sensitivity, colour vision, stereopsis and visual evoked potential (VEP). These results are related to the visible spectrum transmission curve for each experimental lens. recommendations are then made concerning the environmental conditions under which each lens tint should be worn. The HOYA ULT-2000 Light Transmission Metre was used to establish the percentage of visible light being transmitted through each of the experimental lenses. The DMS 80/90 Visible Spectrophotometer was used to generate a visible spectrum transmission curve for each of the 8 experimental lenses used in this study. 30 subjects (Group A) were randomly selected from the RAU student population for the assessment of the effects of tinted lenses static visual acuity, contrast sensitivity, colour vision and stereopsis. 10 students (Group B) were then randomly selected from the RAU student population for the assessment of the effects of tinted experimental lenses on visual evoked potential (VEP). The ametropic subjects in Groups A and B all wore their habitual spectacle or contact lens corrections throughout the testing procedure. The following lens tint colours were used: clear, black, grey, yellow, green, blue, red and pink. The subjects were evaluated binocularly without any tinted lens being worn, then through each of the 8 tinted experimental lenses (randomly presented). Results of the visual skills and VEP testing were analysed as follows: Group A: An average score was calculated for the results achieved on the static visual acuity, contrast sensitivity, colour vision and stereopsis tests when no experimental lenses were worn. This average was then compared to the average static visual acuity, contrast sensitivity, colour vision and stereopsis scores for each of the 8 experimental lenses. Group B: An average score was calculated for each of the amplitude and latency components of the VEP waveforms generated when no experimental lenses are worn. This average was then compared to the average amplitude and latency components generated when each of the 8 experimental lenses (as for Group A) are worn. Static visual acuity was assessed using a Snellen visual acuity letter chart at 6m. Contrast sensitivity was assessed using a Vistech VCTS 6500 Contrast Sensitivity Chart at 3m. Colour vision assessment was performed using the lshihara Colour Vision Test and the City University Colour Vision Test. The Random Dot Near Stereo Test was used to assess stereopsis. The Nicolet Pathfinder II was used to assess visual evoked potentials (VEPs). The results of this study show that the black, grey, yellow, green, blue, red and pink tinted lenses have a statistically significant influence on visual efficiency only when subjective methods (i.e. static visual acuity, contrast sensitivity, colour -vision and stereopsis) of visual efficiency assessment are used. The tinted lenses had little effect on visual efficiency when an objective means (i.e. VEP) of assessment was used, as there were no statistically significant differences between the lenses. The results of this research project indicate that the colour of the lens tint has little real effect on visual efficiency, when measured objectively. The effect of the lens tint is shown to be highly subjective. Tinted lens selection would therefore be based on personal preference and the amount of protection that the lens provides from harmful electromagnetic radiation. It can be concluded that no single lens tint is therefore suitable for all individuals under the same environmental conditions.

by Poon Wai-cheong. / Bibliography: leaf 47 / Thesis (M.B.A.)--Chinese University of Hong Kong, 1983

Thesis (Ph.D.)--University of Wollongong, 2006. / Typescript. Includes bibliographical references: leaf 205-210.

SOLA International, a company which manufactures optical lenses, attended the 2000 Mathematics-in-Industry Study Group (MISG) with a wish list. Topping this list was the creation of a mathematical model of a lens, which given the lens geometry and material properties, could predict the deformation of the lens when it was subjected to an impact, such as that experienced in the fracture tests lenses must pass before being approved for sale. The first steps towards such a model were taken at MISG. At MISG, a lens was modelled simply as a thin uniform thickness plate, undergoing small, linear deformations. In the first section of my thesis I extend this model by considering variable thickness plates and larger, nonlinear deformations. For this extended model I have confirmed that the result obtained at MISG, that the contact between a plate and a spherical indentor occurs at a single point, still holds. The second part of this thesis looks at the dynamic deformation, or vibration, of plates. I have developed numerical solution methods for the large amplitude vibration equations with and without the in-plane inertia terms, based on a finite difference scheme. A comparison of these solutions confirms the often used assumption that the in-plane inertia may be neglected. I have also implemented a number of solution methods from the literature, which use separation of variables techniques. Comparing these with the numerical solutions, we find that the numerical solutions better capture the multi-modal nature of the vibration - showing multiple cycles in the approximate period. Having achieved an understanding of the types of forces involved in plate deformation and vibration I consider shell theory in the final section of my thesis. While time constraints meant no dynamic results could be obtained, general nonlinear deep shell equations have been derived. The static version of these equations has then been solved, with the development of a new solution technique which combines a Taylor expansion to approximate the behaviour at the shell centre with a numerical shooting method. Various shallow shell simplifications of the deep shell equations are then discussed and solved. By comparison of the solutions obtained for the deep and shallow, linear and nonlinear equations I have been able to determine which theories apply to which geometries. A complete model of a lens needs to take into account the shape, its thickness and curvature and the material from which it is made. From the work done in this thesis we have been able to determine that a lens model would require the nonlinear theory. Whether the deep shell theory is necessary is debatable as the geometry of a typical lens falls in the grey area, where either theory could be used depending on the accuracy required. For a very accurate model, deep shell theory would be necessary; if an approximate solution obtained quickly was more useful then I suggest the use of a particular set of shallow shell equations. A full lens model would require variable thickness shell theory and the solution of the dynamic equations, neither of which has been achieved here, but the solution techniques I have developed would be applicable to these theories.