Thesis (M.S.)--Virginia Polytechnic Institute and State University, 1994. / Vita. Abstract. Includes bibliographical references (leaves 58-59). Also available via the Internet.

Thesis (M.S.)--Virginia Polytechnic Institute and State University, 1994. / Vita. Abstract. Includes bibliographical references (leaves 33-36). Also available via the Internet.

Thesis (M.S.)--Virginia Polytechnic Institute and State University, 1993. / Vita. Abstract. Includes bibliographical references (leaves 85-86). Also available via the Internet.

Thesis (M.S.)--Virginia Polytechnic Institute and State University, 1990. / Vita. Abstract. Includes bibliographical references (leaves 65-66). Also available via the Internet.

Thesis (Ph. D.)--Virginia Polytechnic Institute and State University, 1990. / Vita. Abstract. Includes bibliographical references (leave 102). Also available via the Internet.

M.Eng. (Electrical and Electronic Engineering) / An in-fibre Bragg grating is a period perturbation of the refractive index of the core of an optical fibre, where the length of the grating is much longer than the period of the grating. These gratings reflect light in a narrow band around a certain optical frequency. This narrow band is shifted in wavelength when the element is strained and is an absolute measure of the strain state of the grating. One way to interrogate this type of sensor is by using it as a mirror of an optical fibre laser, therefby forcing the laser emission band to coincide with the resonant frequency of the grating. In this thesis a theoretical model was developed to describe the operation of optically pumped Er+-doped optical fibre lasers. An explicit expression for the ouput power for a Fabry Perot fibre laser, was derived for the first time. The intracavity power propagation was also solved numerically. An optical fibre laser consisting out of an Er+-doped optical fibre optically pumped at 980nm, was built. A multilayer dielectric stack mirror was deposited on the one fibre endpoint of the laser. The other reflector is an in-fibre Bragg grating with a peak reflectance of 94% at 1548.5nm and a bandwith of <O.3nm. The buildup of the output power of the laser during the deposition, showed good correlation with the predicted values. The length of the active fibre was also varied, and again the theory could correctly predict the output power as well as the laser pump threshold. A scanning type of Sagnac interferometer was investigated as a possible wavelength demodulation system for the fibre laser sensor. With some alterations this system shows merit as an inexpensive and effective way to monitor the wavelength shifts in in-fibre Bragg gratings.

M.Ing. / This thesis, devoted to fibre optics, is primarily concerned with the utilization of fibre Bragg gratings and optical couplers to realize optical add-drop multiplexers (OADMs). A comparative study regarding various OADM configurations is undertaken on the basis of manufacturing and the performance in terms of insertion loss, channel isolation, tuning ranges, stability and cost. The heart of most of the OADMs is fibre Bragg gratings. The Runge-Kutta numerical integration method is used to solve the coupled-mode equations in order to simulate the spectral dependence of Bragg gratings numerically. Properties such as the grating strength, the grating length and the grating index profile governing the spectral dependence of Bragg gratings are investigated. In recent years, there has been an increasing interest in the dispersive properties of Bragg gratings. We investigate methods to limit the amount of dispersion induced by fibre Bragg gratings. The tuning of Bragg gratings for dynamic OADMs is also reviewed. High channel isolation Bragg gratings are theoretically and experimentally investigated. DC-apodized gratings were designed and manufactured by using the phase mask method through the use of a preconditioning technique. Bragg gratings with channel isolations of up to 24.61 dB have been realized by using this technique. The spectral dependence of DC-apodized gratings on the amount of preconditioning and the smoothness of the index envelope is simulated and in agreement with the experimental results. An athermal Bragg grating was designed and manufactured, exhibiting an average wavelength-temperature sensitivity of 2.76 pm/oC. An OADM comprising a DC-apodized Kaiser grating and an optical circulator was realized. The device showed an insertion loss of 1.84 dB and a channel isolation of 22.84 dB. The coupling mechanisms for different types of optical couplers are investigated. The distribution of power was established to be either by evanescent field coupling (etched, polished and weakly fused couplers) or due to the beating phenomenon (strongly fused couplers). The beating phenomenon of the HE11 and HE12 modes in the waist of the tapered-fused coupler is modelled and used to simulate different characteristics, such as wavelength, polarization and external refractive index dependence of tapered-fused couplers, in order to realize OADMs.

This thesis proves that it is possible in principle to make in line optical fibre polarizers from tapered optical fibres surrounded by a quartz cladding. The theory of light propagation and polarization in fibres was reviewed as background information and several fabrication processes were evaluated and tried experimentally. The best results are obtained by heating a quartz tube in an oxy-propane flame, so that it collapses onto the fibre. Unfortunately, due to residues remaining between fibre and quartz tube, and due to large differences in melting points the results are quite irreproducible, and routine fabrication of polarizers with predictable properties is not yet feasible by the methods described in this thesis. / Science, Faculty of / Physics and Astronomy, Department of / Graduate

Orientador: Cristiano Monteiro de Barros Cordeiro / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Física Gleb Wataghin / Made available in DSpace on 2018-09-02T14:50:23Z (GMT). No. of bitstreams: 1 Osorio_JonasHenrique_D.pdf: 57449332 bytes, checksum: 92f06bf0e96b31630478243a818a7fd6 (MD5) Previous issue date: 2017 / Resumo: Nesta tese, fibras ópticas especiais são estudadas para fins de sensoriamento. Primei-ramente, propomos a estrutura denominada fibra capilar com núcleo embutido (embedded-core capillary fibers) para realização de sensoriamento de pressão. Estudos numéricos e analíticos foram realizados e mostraram que altas sensibilidades a variações de pressão poderiam ser al-cançadas com esta estrutura simplificada, que consiste de um capilar dotado de um núcleo, dopado com germânio, em sua parede. Experimentos permitiram medir uma sensibilidade de (1.04 ± 0.01) nm/bar, que é um valor alto quando comparado a outros sensores de pressão ba-seados em fibras microestruturadas. Ademais, estudamos fibras do tipo surface-core, que são fibras cujos núcleos são colocados na superfície externa da fibra. Nesta abordagem, redes de Bragg foram utilizadas para obter sensores de índice de refração ¿ fazendo-se uso da interação entre o campo evanescente do modo guiado no núcleo e o ambiente externo à fibra ¿ e de cur-vatura ¿ ao se explorar o fato de que, nestas fibras, o núcleo se encontra fora do centro geomé-trico da mesma. As sensibilidades a variações de índice de refração e curvatura medidas, 40 nm/RIU em torno de 1.41 e 202 pm/m-1 comparam-se bem a outros sensores baseados em redes de Bragg. Outrossim, fibras capilares poliméricas foram investigadas como sensores de temperatura e pressão. Para a descrição do sensor de temperatura, usou-se um modelo analítico para simular o espectro de transmissão dos capilares e a sua dependência com as variações de temperatura. No que tange à aplicação de sensoriamento de pressão, variações nas espessuras dos capilares devido à ação da pressão foram calculadas e relacionadas à sensibilidade da me-dida de monitoramento. Nestas duas aplicações, realizações experimentais também são repor-tadas. Finalmente, oportunidades adicionais de sensoriamento ao se utilizar fibras ópticas es-peciais são apresentadas, a saber, um sensor de pressão para dois ambientes baseados em fibras de cristal fotônico, um sensor de três parâmetros baseado em redes de Bragg, fibras afinadas e interferência multimodal, um sensor de nível de líquido baseado em redes de Bragg e interfe-rência multimodal e um sensor de temperatura baseado em fibras embedded-core preenchidas com índio. Os resultados aqui reportados demonstram o potencial das fibras ópticas em forne-cerem plataformas de sensoriamento para alcançar medidas de diferentes tipos de parâmetros com alta sensibilidade e resolução adequada / Abstract: In this thesis, specialty optical fibers for sensing applications are investigating. Firstly, we propose the embedded-core capillary fiber structure for acting as a pressure sensor. Analyt-ical and numerical studies were performed and showed that high pressure sensitivity could be achieved with this simplified fiber structure, which consists of a capillary structure with a germanium-doped core placed within the capillary wall. Experiments allowed measuring a sensitivity of (1.04 ± 0.01) nm/bar, which is high when compared to other microstructured optical fiber-based pressure sensors. Moreover, we studied the so-called surface-core optical fibers, which are fibers whose cores are placed at the external boundary of the fiber. In this approach, Bragg gratings were used to obtain refractive index ¿ making use of the interaction between the guided mode evanescent field and the external medium ¿ and directional curva-ture sensors ¿ by exploring the off-center core position. The measured refractive index and the curvature sensitivities, respectively 40 nm/RIU around 1.41 and 202 pm/m-1, compares well to other fiber Bragg grating-based sensors. Additionally, antiresonant polymer capillary fibers were investigated as temperature and pressure sensors. For the temperature sensing descrip-tion, one used an analytical model to simulate the transmission spectra of such fibers and the dependence on temperature variations. Regarding the pressure sensing application, pressure-induced capillary wall thickness variations were analytically accounted and related to the sys-tem pressure sensitivity. In both these applications, experimental data were presented. Finally, additional opportunities using specialty optical fibers were presented, namely, a photonic-crystal fiber-based dual-environment pressure sensor, a three parameters sensor using Bragg gratings, tapered fibers and multimode interference, a liquid-level sensor based on Bragg grat-ings and multimode interference, and a temperature sensor based in an embedded-core fiber filled with indium. The results reported herein demonstrates the potential of optical fibers for providing sensing platforms to attain measurements of different sort of parameters with highly sensitivity and improved resolutions / Doutorado / Física / Doutor em Ciências / 152993/2013-4 / CNPQ

Thesis (Ph.D.)--Tufts University, 2004. / Adviser: David R. Walt. Submitted to the Dept. of Chemistry. Includes bibliographical references. Access restricted to members of the Tufts University community. Also available via the World Wide Web;