The Kalahari Goldridge mine is located within the Archaean Kraaipan Greenstone Belt about 60 km SW of Mafikeng in the Northwestern Province, South Africa. Several gold deposits are located within approximately north - south-striking banded iron-formation (BIF). Current opencast mining operations are focused on the largest of these (D Zone). The orebody is stratabound and hosted primarily in the BIF, which consists of alternating chert and magnetite-chloritestilpnomelane-sulphide-carbonate bands ranging from mm to cm scale. The ore body varies in thickness from 15 to 45 m along a strike length of about 1.5 km. The BlF is sandwiched between a sericite-carbonate-chlorite schist at the immediate footwall and carbonaceous meta-pelites in the hanging-wall. Further west in the footwall, the schists are underlain by mafic meta-volcanic amphibolite. Overlying the hanging-wall carbonaceous metapeiites are schist units and meta-greywackes that become increasingly conglomeratic up the stratigraphy. Stilpnomelane-, chlorite- and minnesotaite-bearing assemblages in the BlFs indicate metamorphic temperatures of 300 - 450°C and pressures of less than 5 kbars. The BIF generally strikes approximately 3400 and dips from 60 to 75°E. Brittle-ductile deformation is evidenced by small-scale isoclinal folds, brecciation, extension fractures and boudinaging of cherty BIF units. Fold axial planes are sub-parallel to the foliation orientation with sub-vertical plunges parallel to prominent rodding and mineral lineation in the footwall. Gold mineralization at the Kalahari Goldridge deposit is associated with two generations of subhorizontal quartz-carbonate veins dips approximately 20 to 40°W. The first generation consists of ladder vein sets (Group lIA) preferentially developed in Fe-rich meso bands, whilst the second generation consists of large quartz-carbonate veins (Group lIB), which crosscut the entire ore body extending into the footwall and hanging-wall in places. Major structures that control the ore body are related to meso-scale isoclinal folds with fold axes subparallel to mineral elongation lineations, which plunge approximately 067°E. These linear structures form orthogonal orientation with the plane of the mineralized shallowdipping veins indicating stretching and development of fluid - focusing conduits. A second-order controlling feature corresponds to the intersection of the mineralized veins and foliation planes of host rock, plunging approximately 008°N and trending 341°. G0ld is closely associated with sulphides, mainly pyrite and pyrrhotite and to a lesser extent with bismuth tellurides, and carbonate gangue. The ore fluid responsible for the gold deposition is in the C-O-H system with increased CH₄ contents attributed to localized hydrolysis reaction between interbedded carbonaceous sediment and ore fluid. The fluid is characterized by significant C0₂ contents and low salinities below 7.0 wt % NaCl equivalent (averages of 3.5 and 3.0 wt % NaCl equivalent for the first and second episodes of the mineralization respectively) . Calculated values of f0₂. ranging from 10⁻²⁹·⁹⁸ to 10⁻³²·⁹⁶ bars, bracket the C0₂-CH₄ and pyrite-pyrrhotite-magnetite buffer boundaries and reveal the reducing nature of the ore fluid at deposition. Calculated total sulphur content in the ore fluid (mΣs), ranges from 0.011 to 0.018M and is consistent with the range (10⁻³·⁵ to 10⁻¹M) reported for subamphibolite facies ore fluids. The close association of sulphides with the Au and nature of the fluid also give credence that the Au was carried in solution by the Au(HS)₂ - complex. Extensive epigenetic replacement of magnetite and chlorite in BIF and other meta-pelitic sediments in the deposit by sulphides and carbonates, both on meso scopic and microscopic scales gives evidence of an interaction by a CO₂- and H₂S-bearing fluid with the Fe-rich host rocks in the deposit. This facilitated Au precipitation due to changes in the physico-chemical conditions of the ore fluid such as a decrease in the mΣs and pH leading to the destabilization of the reduced sulphur complexes. Local gradients in f0₂ may account for gold precipitation in places within carbonaceous sediments. The fineness of the gold grams (1000*Au/(Au + Ag) ranges from 823 to 921. This compares favourably with the fineness reported for some Archaean BIFhosced deposits (851 - 970). Mass balance transfer calculations indicate that major chemical changes associated with the hydrothermal alteration of BIF include enrichment of Au, Ag, Bi, Te, volatiles (S and CO₂), MgO, Ba, K and Rb but significant depletion of SiO₂ and minor losses of Fe₂O₃. In addition, anomalous enrichment of Sc (average, 1247%) suggests its possible use as an exploration tool in the ferruginous sediments in the Kraaipan greenstone terrane. Evidence from light stable isotopes and fluid inclusions suggests that the mineralized veins crystallized from a single homogeneous fluid source during the two episodes of mineralization under the similar physicochemical conditions. Deposition occurred at temperatures rangmg from 350 to 400°C and fluid pressures ranging from 0.7 to 2.0kbars. Stable isotope constraints indicate the following range for the hydrothermal fluid; θ¹⁸H₂O = 6.65 to 10.48%0, 8¹³CΣc = -6.0 to -8.0 %0 and 8³⁴SΣs = + 1.69 to + 4.0%0 . These data do not offer conclusive evidence for the source of fluid associated with the mineralization at the Kalahari Goldridge deposit as they overlap the range prescribed for fluid derived from devolatization of deep-seated volcano-sedimentary piles near the brittle-ductile transition in greenstone belts during prograde metamorphism, and magmatic hydrothermal fluids. / KMBT_363 / Adobe Acrobat 9.54 Paper Capture Plug-in

In the Middelplaats mine area of the Kalahari manganese field, two drill holes (MP53 and MP54) intersected anomalously high-grade manganese ore sitting stratigraphically just above an igneous body (likely a dike or sill). Manganese ore located within approximate 5 meters of the contact with the underlying igneous rocks has been substantially metasomatically upgraded from 25 percent manganese, to over 40 percent whilst the dominant manganese species within the ore has been altered to hausmannite. This report demonstrates the metasomatic alteration is related to devolatilization (removal and/or remobilization of H₂O, CO₂ and CaO) due to contact metamorphism caused by the underlying igneous rocks. The Middelplaats mine is situated in the southwest corner of the Kalahari manganese field where the paleo basin shallows out and ends. Within the mine area, several stratigraphic units pinch out or are truncated by the side of the basin. This pinching out of lithological formations has led to the underlying Ongeluk Formation being in contact with the much younger units of the Hotazel Formation. Therefore, geochemical investigation into the nature and source of the igneous rocks was also undertaken to see if the rocks from the two drill holes were related to one another and/or the underlying Ongeluk Formation. Results of these geochemical studies have demonstrated that the Middelplaats igneous rocks (dolerites) from the two drill holes (MP53 and MP54) share a co-genetic source region. There is also reasonable geochemical evidence that the source region of the Middelplaats igneous rocks was substantially similar to the source region of the Ongeluk Formation. This may indicate that the source region of the Ongeluk Formation was reactivated at some later stage resulting in the emplacement of doleritic dikes or sills in the Middelplaats mine area. The Middelplaats igneous rocks were also found to have undergone a slight but pervasive potassic alteration; with most of the original plagioclase feldspar showing some level of replacement by a potassium enriched feldspar. Although no source for this potassic fluid was found, the devolatilization reaction within the manganese ore appears to have released some potassium into the surrounding rocks. This additional potassium may be responsible for some localized potassic alteration.

[Truncated abstract] The Tintina Gold Province (TGP) comprises numerous (<15) gold belts and districts throughout interior Alaska and Yukon that are associated with Cretaceous plutonic rocks. With a gold endowment of ∼70Moz, most districts are defined by their placer gold contributions, which comprise greater than 30 Moz, but four districts have experience significant increases in gold exploration with notable discoveries at Fort Knox (5.4 Moz), Donlin Creek (12.3 Moz), Pogo (5.8 Moz), True North (0.79 Moz), and Brewery Creek (0.85 Moz). All significant TGP gold deposits are spatially and temporally related to reduced (ilmenite-series) and radiogenic Cretaceous intrusive rocks that intrude (meta-) sedimentary strata. The similar characteristics that these deposits share are the foundation for the development of a reduced intrusion-related gold deposit model. Associated gold deposits have a wide variety of geological and geochemical features and are categorized as intrusion-centered (includes intrusion-hosted, skarns and replacements), shear-related, and epizonal. The TGP is characterized by vast, remote under-explored areas, unglaciated regions with variable oxidation depths and discontinuous permafrost, which, in combination with a still-evolving geological model, create significant exploration challenges. Twenty-five Early and mid-Cretaceous (145-90 Ma) plutonic suites and belts are defined across Alaska and Yukon on the basis of lithological, geochemical, isotopic, and geochronometric similarities. These features, when combined with aeromagnetic characteristics, magnetic susceptibility measurements, and whole-rock ferric:ferrous ratios define the distribution of magnetite- and ilmenite-series plutonic belts. Magnetite-series plutonic belts are dominantly associated with the older parts of the plutonic episode and comprise subduction-generated metaluminous plutons that are distributed preferentially in the more seaward localities dominated by primitive tectonic elements. Ilmenite-series plutonic belts comprise slightly-younger, slightly-peraluminous plutons in more landward localities in pericratonic to continental margin settings. They were likely initiated in response to crustal thickening following terrane collision. The youngest plutonic belt forms a small, but significant, magnetite-series belt in the farthest inboard position, associated with alkalic plutons that were emplaced during weak extension. Intrusion-related metallogenic provinces with distinctive metal associations are distributed, largely in accord with classical redox-sensitive granite-series. Copper, Au and Fe mineralisation are associated with magnetite-series plutons and tungsten mineralisation associated with ilmenite-series plutons. However, there are some notable deviations from expected associations, as intrusion-related Ag-Pb-Zn deposits are few, and significant tin mineralisation is rare. Most significantly, many gold deposits and occurrences are associated with ilmenite-series plutons which form the basis for the reduced intrusion-related gold deposit model

A review of Archean granite-greenstone terranes, orogenic gold deposits, the Slave Province and modern exploration tools, techniques and methods was conducted to identify prospective areas in the Yellowknife domain for hosting orogenic gold deposits and illustrate the best exploration methods for delineating this deposit type. This study identifies Archean granite-greenstone terranes as economically important hosts to quartz-carbonate vein-hosted orogenic gold deposits. These deposits occur at convergent plate margins, but can also be related to local extensional tectonics within a convergent setting. Heat generated from tectonic processes can trigger hydrothermal fluid movement along first-order faults and shear zones. Precipitation of gold-bearing quartz-carbonate veins from the hydrothermal fluids occurs in second- and third-order faults and shear zones related to the first-order structures. This study also identifies the Archean Slave Province in northern Canada as a well-endowed craton with numerous orogenic gold deposits, diamondiferous kimberlites, VMS deposits and several other mineralization styles. In particular, three greenstone belts (Yellowknife, Cameron River and Beaulieu River) associated with likely first-order structures are comprised of prospective rocks for hosting orogenic gold and VMS mineralization. The Yellowknife greenstone belt hosts the past-producing and former world-class Con and Giant orogenic gold deposits, but has been little explored with modern exploration techniques. The Cameron River and Beaulieu River greenstone belts host numerous base and precious metal VMS and BIF-hosted orogenic gold prospects and deposits, indicating mineralization is present. There is considerable potential for significant discoveries to be made using modern exploration techniques in the greenstone belts; however, exploration in the region has been hindered over the past decade by ongoing political negotiations. Once the political negotiations are finalized, application of modern exploration methods and techniques in the prospective greenstone belts should be carried out. Regional scale methodologies should be applied to generate targets using predictive modelling, implicit 3D modelling, 3D geochemistry and exploration targeting so decisions defining a businesses strategy for ground acquisition of high priority targets are made using quantitative analysis. Once ground is acquired, field-based exploration for orogenic gold and VMS deposits should include geological mapping with a focus on structural geology, geochemical sampling and airborne magnetic, radiometric and EM geophysical surveys. Prior to reconnaissance drilling, integration of all data layers and interpretation within a common 3D earth model should be conducted. Following successful reconnaissance drilling, definition drilling along strike and down dip of intersected mineralization, combined with borehole geophysics, should be carried out to delineate the extent of mineralization.

The Koulekoun Gold project is the most important prospect of Avocet Mining plc. It is one of the projects within the TriK-block in Guinea (West Africa) for which an exploration permit has been granted. The Koulekoun deposit is located within the Siguiri basin of Birimian age in the Eastern Guinea region; where most Guinea’s gold mines are situated. The present study involves the investigation of structural elements (S₀, S₁, S₂, intrusive contacts, faults and veins) from selected drill cores from drill sections that intersect the Koulekoun orebody in four parts of the deposit; characterizes the principal orientations of measured structures and determines their relationships using stereonet; in order to predict important intersections to focus on in exploration programs within the TriK-block and suggests a possible structural model of the Koulekoun deposit. Raw data used for the present research was collected from half-core samples due to the absence of surface outcrop from which direct measurements could have been made. Measured data were interpreted using stereographic projection. Often no preferred orientations of structural elements exist in the area, suggesting a complex structural situation, particularly with regard to hydrothermal vein attitudes. Thus, it has been illustrated from structural data analysis and S₀ data 3d interpolation of the four sub-structural domains (North-East, North-West, Central and South) that NE-SW structures (S₂, intrusive contact, fault and vein) have controlled the occurrency of gold mineralization in the Koulekoun deposit area. Geometrical relationships between structure main cluster orientation from stereonet analysis show the majority of S₀ moderately E-dipping; intrusive contacts dip at moderate angle to the SE in all zones, except in the North-East zone where they are sub-vertical and SE-dipping. Fault planes show variable orientation of NE-SW, NW-SE and E-W, and steeply SE-dipping. Vein planes correspond to fault systems and show high variability in their orientation with numerous orders of vein direction in each domain. The cross-cutting relationships suggest two principal generations of faults: the NE-SW fault (F1) and the NW-SE fault (F2). These two fault systems and their associated vein intersection areas preferably define the ore shoot zones within the Koulekoun deposit. The proposed structural model of the Koulekoun deposit suggests the intersection and interference of major NW-SE and minor NE-SW structures. The interference of folds formed basin-dome structures with oval shape geometries striking NW-SE and that dominantly occur in North-East, North-West and Central zones. The South Zone is characterized by NE-SW gently plunging and moderately inclined folds with NW-SE striking axial surface. Gold mineralization occurs at the edges of basin-dome structures in North-East, North-West and Central zones. Mineralized porphyry intrusions are likely located within the axial surface of the South zone folds and extend toward the Central zone. The proposed model is compliant with the earlier model of the Koulekoun deposit presented by Tenova (2013); Fahey et al. (2013) describing the Koulekoun deposit as an auriferous NE-SW trending fault zone, intersecting a major NW-striking and steeply E-dipping porphyry units. The model also fits within the regional structural context suggested by Lahondere et al. (1999a) related to the E-W vein structures attributed to NW-SE fractures and to the conjugated fault of NE-SW direction. Comparatively to the three industrial gold deposits (Siguiri, Lero, Kiniero) being currently mined in the Siguiri Basin, and defined as mesothermal vein and lode mineralization hosted in Birimian meta-sedimentary rocks (Lalande, 2005), the Koulekoun gold deposit appears to be a porphyry hosted orogenic disseminated style mineralization system (Fahey et al., 2013). Although, similarities between the Koulekoun gold deposit and these three industrial deposits (Siguiri, Lero, Kiniero) constitute of the intensive extends of the weathering profile and at some stages, by the existence of numerous ring-shaped and curved lineaments enhanced by drag folding (Lero deposit for instance). It is therefore recommended that targets selection around the Koulekoun deposit and within the TriK-block for further exploration programs be concentrated along NW-SE structures, in objective to determine possible intersection zones with NE-SW structures.

The Paleoproterozoic Transvaal Supergroup in the Northern Cape Province of South Africa is host to high-grade BIF-hosted hematite iron-ore deposits and is the country’s most important source of iron to date. Previous work has failed to provide a robust and all-inclusive genetic model for such deposits in the Transvaal Supergroup; in particular, the role of hydrothermal processes in ore-genesis has not been adequately clarified. Recent studies by the author have produced evidence for hydrothermal alteration in shales (Olifantshoek Supergroup) stratigraphically overlying the iron-ore intervals; this has highlighted the need to reassess current ore-forming models which place residual supergene processes at the core of oregenesis. This thesis focuses on providing new insights into the processes responsible for the genesis of hematite iron ores in the Maremane anticline through the use of newly available exploration drill-core material from the centre of the anticline. The study involved standard mineralogical investigations using transmitted/reflected light microscopy as well as instrumental techniques (XRD, EPMA); and the employment of traditional whole-rock geochemical analysis on samples collected from two boreholes drilled in the centre of the Maremane anticline, Northern Cape Province. Rare earth element analysis (via ICP-MS) and oxygen isotope data from hematite separates complement the whole-rock data. Iron-ore mineralisation examined in this thesis is typified by the dominance of Fe-oxide (as hematite), which reaches whole-rock abundances of up to 98 wt. % Fe₂O₃. Textural and whole-rock geochemical variations in the ores likely reflect a variable protolith, from BIF to Fe-bearing shale. A standard supergene model invoking immobility and residual enrichment of iron is called into question on the basis of the relative degrees of enrichment recorded in the ores with respect to other, traditionally immobile elements during chemical weathering, such as Al₂O₃ and TiO₂. Furthermore, the apparently conservative behaviour of REE in the Fe ore (i.e. low-grade and high-grade iron ore) further emphasises the variable protolith theory. Hydrothermally-induced ferruginisation is suggested to post-date the deposition of the post-Transvaal Olifantshoek shales, and is likely to be linked to a sub-surface transgressive hydrothermal event which indiscriminately transforms both shale and BIF into Fe-ore. A revised, hydrothermal model for the formation of BIF-hosted high-grade hematite iron ore deposits in the central part of the Maremane anticline is proposed, and some ideas of the author for further follow-up research are presented.