M.Sc. (Geology) / Please refer to full text to view abstract

Thesis (Ph.D.)--McMaster University (Canada), 1988. / Source: Dissertation Abstracts International, Volume: 62-13, Section: A, page: 0000.

M.Sc. / The Mamatwan mine is situated at the most southern end of the world’s largest landbased resource of manganese, the Kalahari manganese field. The mine is operated by South African Manganese Corporation Limited (SAMANCOR) and is the largest open pit manganese mine in the world. The sedimentary manganese ore bed is interbedded with iron-formation of the Hotazel Formation of the Early Paleoproterozoic Voëlwater Subgroup of the Transvaal Supergroup. The open pit Mamatwan mine has a proven economic ore reserve of between 300 and 400Mt and produces 1.2Mt of manganese ore annually, of which 0.5Mt of ore is beneficiated and shipped through the harbour at Port Elizabeth. The remaining ore is railed to ferro-alloy plants at Meyerton and Newcastle. Carbonate-rich manganese lutite mined at the Mamatwan Mine is widely known as Mamatwan-type ore. It has a manganese content ranging from 30 – 38%. Only a small portion (15m of a total thickness of 49m) of the ore bed, containing an average of 38% Mn, is being mined and processed at present. The larger portion of the ore bed is not utilized. This study focuses on the physical and chemical characteristics of the ore bed in more detail in order to make suggestions on how to a) reduce waste by upgrading the upper parts of the lower manganese ore bed, or b) to improve the current recovery from the present economic zone. A second part of this study pays special attention to the lithostratigraphy of the lower manganese ore bed. The focus is on the paragenetic sequence and the diagenetic evolution of the braunite lutite that constitutes the manganese ore. The Mamatwan-type ore can be described as diagenetic to very low-grade metamorphic carbonate-bearing braunite manganolutite. Based on geochemical and mineralogical data, the lower manganese ore body was previously subdivided into eleven lithogically distinct zones. Based on detailed diamond drill core logging and with the aid of geochemical and physical data of two selected drill cores, an additional thirteen subzones were identified in this study. These new subzones were found to be consistent across the entire study area, located to the west and north of the present Mamatwan open pit. The paragenetic sequence recognised in the ore of the lower manganese ore bed can be subdivided into four stages, namely: (a) sedimentation, which is represented by fine lamination and the presence of fine-grained “dusty hematite”. (b) early diagenesis as represented by micritic carbonate matrix and possibly braunite, (c) late diagenesis or low-grade metamorphism are represented by coarse grained hausmannite, specularitic hematite, partridgeite and Mn-calcite, and supergene alteration that occurs immdediately below the contact of the ore bed to the unconformably overlying Tertiary Kalahari Formation. This supergene altered zone is marked by the presence of Mn4+ oxides such as cryptomelane, manjiroite, romanechite and pyrolusite, in addition to barite. The results obtained in this study permit definition of two sedimentary cycles within the manganese ore bed at the Mamatwan mine. Both cycles are defined by a carbonate-rich finely laminated zone at the base, overlain by a central manganese-rich economic zone, capped by manganese lutite that is enriched in carbonate ovoids. The two manganeserich zones are known as the M (lower) and X (upper) zone, and are characterized by the replacement of carbonate ovoids by hausmannite. The two Mn-rich zones are chemically and physically almost identical, with the M zone 7.5m thick and the X zone 5.5m thick. However, in the present mining configuration only the M zone is being mined. The most important result arising from the present study is the recommendation to restructure the future mining operation in order to mine not only the M zone, but also the X zone.

A Dissertation Submitted to the Faculty of Science University of the Witwatersrand, Johannesburg for the Degree of Master of Science. / Beatrix Mine is located 35 km south of the city of Welkom in the Welkom Goldfield and as such forms the most southerly of the Witwatersrand-type gold mines. The Beatrix Reef overlies an angular unconformity at the base of the Turffontein Subgroup, Central Rand Group Significant, southerly truncation of over 600m of the Johannesburg Subgroup, and the lower formations of the Turffontein Subgroup, occur at this unconformity in the Beatrix area.. characteristics of the Beatrix Reef conglomerates such as the morphology, sorting and packing of clasts, and the arrangement. of the sediments in various sedimentary structures and facies/ sequences, suggest deposition within a braided fluvial environment on a coarse-grained braid-delta. Sedimentation occurred after the fluvial degradation of previously deposited units, and culminated in a marine/ lacustrine transgression. Low aggradation rates led to significant reworking and concentration of placer materials in a depositional model probably typical of ventral Rand Group placer formation. Heavy minerals (and gold) are concentrated in response to hydraulic conditions and show a close association with large and small scale sedimentary features. Transport directions deduced from the sedimentary structures suggest a north to south dispersal of sediment down the braid plain. Sedimentary structures in the finer rained units at the base of the Eldorado Formation are indicative of tidal influences and document the marine transgression as the culmination of the degradational events. The lithologys sedimentary structures and facies sequences of the coarser grained units of the Eldorado Formation well as the overall coarsening upward of these lithologies indicate sedimentation in a braided , fluvial system, on an alluvial fan prograding across the preyiously deposited units" Sedimentary ~tructures and lithologic variations confirm a continued north to south dispersal pattern. In the area south of the Sand over the period of fluvial degradation and transgression after the formation of the Beatrix: Reef was followed by more rapidly aggreding fluvial progradation due to a major change in base level in response to compressional tectonics and uplift along the Western Margin Structure. Only in post-Central Rand Group times did relaxation and extensional tectonics result in the outpourings of the Ventersdorp .supergroup lavas and the cessation of active Witwatersrand Supergroup sedimentation. / Andrew Chakane 2018

The Koongarra uranium deposit is hosted by quartz-chlorite schists. A conceptual model for the hydrogeology of the deposit is proposed on the basis of lithologic criteria and limited hydraulic testing. Water-level and aquifer-test data are presented that indicate the deposit lies within a partially confined, heterogeneous, anisotropic fractured-rock aquifer. The aquifer is dynamic with annual, diurnal, and semidiurnal water-level fluctuations. The results of aquifer tests indicate a high degree of connectivity in the aquifer. Fracture-dominated flow is observed in some tests, but the overall aquifer response appears to be that of an equivalent porous medium. A homogeneous, anisotropic model is used to estimate the transmissivity tensor for subregions of the aquifer. Anisotropy is well-developed with north- to east-northeast-oriented principal transmissivities. Northeast directions represent large-scale drawdown patterns and are subparallel to bedrock structure and the Koongarra fault. Northerly directions are localized and may reflect a less extensive fracture fabric or a flexure in the bedrock foliation.

[Formulae and special characters can only be approximated here. Please see the pdf version of the abstract for an accurate reproduction.] The formation of world-class Archean orogenic gold deposits in the Eastern Goldfields Province of Western Australia was the result of a critical combination of physical and chemical processes that modified a single and widespread ore-fluid along fluid pathways and at the sites of gold deposition. Increased gold endowment in these deposits is associated with efficient regional-scale fluid focusing mechanisms and the influence of multiple ore-depositional processes at the deposit-scale. Measurement of the complexity of geologic features, as displayed in high-quality geologic maps of uniform data density, can be used to highlight areas that influence regional-scale hydrothermal fluid flow. Useful measurements of geological complexity include fractal dimensions of map patterns, density and orientation of faults and lithologic contacts, and proportions of rock types. Fractal dimensions of map patterns of lithologic contacts and faults highlight complexity gradients. Steep complexity gradients, between domains of high and low fractal dimensions within a greenstone belt, correspond to district-scale regions that have the potential to focus the flow of large volumes of hydrothermal fluid, which is critical for the formation of significant orogenic gold mineralization. Steep complexity gradients commonly occur in greenstone belts where thick sedimentary units overly more complex patterns of lithologic contacts, associated with mafic intrusive and mafic volcanic units. The sedimentary units in these areas potentially acted as seals to the hydrothermal Mineral Systems, which resulted in fluid-pressure gradients and increased fluid flow. The largest gold deposits in the Kalgoorlie Terrane and the Laverton Tectonic Zone occur at steep complexity gradients adjacent to thick sedimentary units, indicating the significance of these structural settings to gold endowment. Complexity gradients, as displayed in surface map patterns, are an indication of three-dimensional connectivity along fluid pathways, between fluid source areas and deposit locations. Systematic changes in the orientation of crustal-scale shear zones are also significant and measurable map features. The largest gold deposits along the Bardoc Tectonic Zone and Boulder-Lefroy Shear Zone, in the Eastern Goldfields Province, occur where there are counter-clockwise changes in shear zone orientation, compared to the average orientation of the shear zone along its entire length. Sinistral movement along these shear zones resulted in the formation of district-scale dilational jogs and focused hydrothermal fluid-flow at the Golden Mile, New Celebration and Victory-Defiance deposits. Faults and lithologic contacts are the dominant fluid pathways in orogenic gold Mineral Systems, and measurements of the density of faults and contacts are also a method of quantifying the complexity of geologic map patterns on high-quality maps. Significantly higher densities of pathways in areas surrounding larger gold deposits are measurable within 20- and 5-kilometer search radii around them. Large variations in the sulfur isotopic composition of ore-related pyrites in orogenic gold deposits in the Eastern Goldfields Province are the result of different golddepositional mechanisms and the in-situ oxidation of a primary ore fluid in specific structural settings. Phase separation and wall-rock carbonation are potentially the most common mechanisms of ore-fluid oxidation and gold precipitation. The influence of multiple gold-depositional mechanisms increases the potential for significant ore-fluid oxidation, and more importantly, provides an effective means of increasing gold endowment. This explains the occurrence of negative δ34S values in ore-related pyrites in some world-class orogenic gold deposits. Sulfur isotopic compositions alone cannot uniquely define potential gold endowment. However, in combination with structural, hydrothermal alteration and fluid inclusion studies that also seek to identify multiple ore-forming processes, they can be a useful indicator. The structural setting of a deposit is also a potentially important factor controlling ore-fluid oxidation and the distribution of δ34S values in ore-related pyrites. At Victory-Defiance, the occurrence of negative δ34S(py) values in gently-dipping dilational structures, compared to more positive δ34S(py) values in steeply-dipping compressional structures, is potentially associated with different gold-depositional mechanisms that developed as a result of fluid-pressure fluctuations during different stages of the fault-valve cycle. During the pre-failure stage, when fluids are discharging from faults, fluid-rock interaction is the dominant gold-depositional mechanism. Phase separation and back-mixing of modified ore-fluid components are dominant during and immediately after faulting. Under appropriate conditions, any, or all, of these three mechanisms can oxidize orogenic gold fluids and cause gold deposition. The influence of multiple gold-depositional mechanisms during fault-valve cycles at dilational jogs, where fluid pressure fluctuations are interpreted to be most severe, can potentially explain both the large gold endowment of the giant to world-class Golden Mile, New Celebration and Victory-Defiance deposits along the Boulder-Lefroy Shear Zone, and the presence of gold-related pyrites with negative δ34S values in these deposits. This study highlights the interplay that exists between physical and chemical processes in orogenic gold Mineral Systems, during the transport of ore fluids in pathways from original fluid reservoirs to deposit sites. Potentially, a single and widespread orogenic ore-fluid could become oxidized, and lead to the formation of ore-related sulfides with variable sulfur isotopic compositions, depending on the nature and orientation of major fluid pathways, the nature of wall-rocks through which it circulates, and the precise ore-depositional processes that develop during fault-valve cycles.

[Truncated abstract] Detailed sedimentological, petrographical, geochemical and palynological studies have provided insight into the source rocks and the processes that operated during formation of the Tertiary Yandi channel iron deposit (CID) of the eastern Pilbara, Western Australia. Yandi is the largest and most valuable CID in the world, accounting for more than 2.5% of global iron production in 2003, and is the type-example of CID. The Yandi CID occupies the palaeo-Marillana Creek in the central Hamersley Ranges. It is near-coincident-with the modern Marillana Creek which incised Proterozoic bedrock of the Weeli Wolli Formation (Hamersley Group) and associated dolerite intrusions. Three lithostratigraphic units fill the palaeo-Marillana Creek and comprise the Marillana Formation. The units in stratigraphic order are the: (1) Munjina Member; (2) Barimunya Member, which hosts the majority of the iron resource; and (3) Iowa Eastern Member. Fossil pollen and spores in organic-rich claystones in the Munjina Member indicate that deposition of the Marillana Formation most likely commenced in the Early Oligocene in response to erratic seasonal flows with high energy flood events and intervening quiescent suspension settling of clays. The Marillana Formation consists of twelve facies. These conglomerate and clay facies form three facies associations. The basal facies association is composed of polymictic conglomerate, clay and interbedded CID that represents a lag deposit along the base of the palaeochannel. This facies association characterises the Munjina Member. The second facies association consists of iron-rich conglomerate sheets, bars and subordinate scour-fills and characterises the Barimunya Member. Channel iron deposits of the overlying Iowa Eastern member consist of reworked Barimunya Member iron conglomerates. The upper facies association is polymictic conglomerate with clay that characterises the remainder of the Iowa Eastern Member. Polymictic iron conglomerate in the Munjina and Barimunya Members contains Weeli Wolli Formation and dolerite clasts indicating local derivation. Rare earth element profiles of the other iron conglomerate facies indicate derivation of the Barimunya and Iowa Eastern CID from a different source. These iron conglomerates are characterised by relatively flat LREE profiles. The LREE exhibit an enriched profile approaching the MREE [(average La/Nd)N = 0.7], and the HREE profile shows minor enrichment approaching ytterbium [(average Dy/Yb)N = 0.9]. Comparison of iron conglomerate REE profiles to those of the bedrock indicates that these conglomerates were most probably derived from the Joffre Formation BIF of the Hamersley Group

Over the last two decades, gold occurrences in the Palaeoproterozoic Pine Creek Orogen (PCO) have been cited as type-examples of high-temperature contact-metamorphic or thermal-aureole deposits associated with granitoid magmatism. Furthermore, spatial relationships between these gold occurrences and the granitoids have led to inclusion of these deposits in the intrusion-related gold deposit group. Research on the characteristics, distribution and timing of these gold deposits tests these classifications and supports an alternative interpretation. The deposits display many similarities to well-described ‘turbidite-hosted’ orogenic gold deposits described from several Palaeozoic orogens. As in most ‘turbidite-hosted’ orogenic deposits, the gold mineralisation is dominantly epigenetic, sediment-hosted (typically greywacke and siltstone) and fold-controlled. Most gold is hosted by concordant or discordant veins, with limited alteration halos in host rocks, except where they occur in silicate-facies BIF or other Fe-rich rocks. The domal culminations of major doubly-plunging anticlines, and/or fold-limb thrust-faults, are important structural controls at the camp- and deposit-scales. Many deposits are sited in parts of the lithostratigraphy where there is significant competency and/or chemical contrast between units or sequences. In particular, the complex interdigitated stratigraphy of euxinic and transitional high-energy sedimentary rocks of the c.1900-1880Ma South Alligator Group is important for the localisation of gold deposits. The distribution of deposits is influenced further by the location and shape of granitoids and their associated contact-metamorphic aureole. Approximately 90% of gold deposits lie within the ∼2.5km wide contact-aureole, and most of these are concentrated in, and just beyond, the biotite-albite-epidote zone (0.5-1.0km from granitoid), with few deposits located in the inner hornblende-hornfels zone. At the deposit scale, gold is commonly associated with arsenopyrite-loellengite and pyrite, native-Bi and Bi-bearing minerals, and is confined to a variety of extensional quartz-sulphide ± carbonate veins. Such veins formed typically at 180-320°?C and ∼1kbar from low- to moderate salinity, two-phase aqueous fluids. Isotopic studies of the deposits are equivocal in terms of the source of hydrothermal fluid. Most δD and δ18O values fall within the range defined for contact-metamorphic and magmatic fluids, and sulphur isotopes indicate that the fluids are within the range of most regional sources. Significantly, lead isotope ratios show that the goldbearing fluid does not have a felsic magmatic-source signature, but instead suggest a homogenous regional-scale lead source. Excluding a few outliers, the relative uniformity of deposit characteristics, including host rocks, structural style, alteration, sulphide paragenesis and fluid P-T-X conditions, suggests that most deposits represent a continuum of broadly coeval mineralisation that formed under similar geological conditions

[Truncated abstract] Banded iron formations of the ~27702405 Ma Hamersley Province of Western Australia were locally upgraded to high-grade hematite ore during the Early Palaeoproterozoic by a combination of hypogene and supergene processes after the initial rise of atmospheric oxygen. Ore genesis was associated with the stratigraphic break between Lower and Upper Wyloo Groups of the Ashburton Province, and has been variously linked to the Ophthalmian orogeny, late-orogenic extensional collapse, and anorogenic continental extension. Small spot PbPb dating of in situ baddeleyite by SHRIMP (sensitive highresolution ion-microprobe) has resolved the ages of two key suites of mafic intrusions constraining for the first time the tectonic evolution of the Ashburton Province and the age and setting of iron-ore formation. Mafic sills dated at 2208 ± 10 Ma were folded during the Ophthalmian orogeny and then cut by the unconformity at the base of the Lower Wyloo Group. A mafic dyke swarm that intrudes the Lower Wyloo Group and has close genetic relationship to iron ore is 2008 ± 16 Ma, slightly younger than a new syneruptive 2031 ± 6 Ma zircon age for the Lower Wyloo Group. These new ages constrain the Ophthalmian orogeny to the period <2210 to >2030 Ma, before Lower Wyloo Group extension, sedimentation, and flood-basalt volcanism. The ~2010 Ma dykes present a new maximum age for iron-ore genesis and deposition of the Upper Wyloo Group, thereby linking ore genesis to a ~21002000 Ma period of continental extension similarly recorded by Palaeoproterozoic terrains worldwide well after the initial oxidation of the atmosphere at ~2320 Ma. The Lower Wyloo Group contains, in ascending order, the fluvial to shallow-marine Beasley River Quartzite, the predominantly subaqueously emplaced Cheela Springs flood basalt and the Wooly Dolomite, a shelf-ramp carbonate succession. Field observations point to high subsidence of the sequence, rather than the mainly subaerial to shallow marine depositional environment-interpretation described by earlier workers. Abundant hydro-volcanic breccias, including hyaloclastite, peperite and fluidal-clast breccia all indicate quench-fragmentation processes caused by interaction of lava with water, and support the mainly subaqueous emplacement of the flood basalt which is also indicated by interlayered BIF-like chert/mudstones and below-wave-base turbiditic mass-flows.

No description available.