Bibliography: leaves 134-148. / xi, 148 leaves : ill. ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / The objectives of this study are to determine if and how inorganic matrices influence organic matter decomposition with particular emphasis on the biochemical changes which occur as decomposition progresses. The influence of inorganic matrices (sand, sand + kaolin and loamy sand) on the decomposition of straw and Eucalyptus litter during incubations was followed by various chemical and spectroscopic methods to aid in the understanding of the mechanism of physical protection of organic matter in soils. / Thesis (Ph.D.)--University of Adelaide, Dept. of Soil Science, 1997

Thesis (MTech (Chemical Engineering))--Cape Peninsula University of Technology, 2005 / The white rot fungus, Phanerochaete chrysosporium, produces enzymes, which are capable of degrading chemical pollutants. It was detennined that this fungus has multiple growth phases. The study provided infonnation that can be used to classify growth kinetic parameters, substrate mass transfer and liquid medium momentum transfer effects in continuous secondary metabolite production studies. P. chrysosporium strain BKMF 1767 (ATCC 24725) was grown at 37 QC in single fibre capillary membrane bioreactors (SFCMBR) made of glass. The SFCMBR systems with working volumes of 20.4 ml and active membrane length of 160 mm were positioned vertically. Dry biofilm density was determined by using a helium pycnometer. Biofilm differentiation was detennined by taking samples for image analysis, using a Scanning Electron Microscope at various phases of the biofilm growth. Substrate consumption was detennined by using relevant test kits to quantify the amount, which was consumed at different times, using a varying amount of spore concentrations. Growth kinetic constants were detennined by using the substrate consumption and the dry biofilm density model. Oxygen mass transfer parameters were determined by using the Clark type oxygen microsensors. Pressure transducers were used to measure the pressure, which was needed to model the liquid medium momentum transfer in the lumen of the polysulphone membranes. An attempt was made to measure the glucose mass transfer across the biofilm, which was made by using a hydrogen peroxide microsensor, but without success.

No description available.

Indiana University-Purdue University Indianapolis (IUPUI) / Organic-rich substrates such as soil provide an excellent carbon source for bacteria. However, hydrocarbons such as those found in various ignitable liquids can also serve as a source of carbon to support bacterial growth. This is problematic for fire debris analysis as samples may be stored at room temperature for extended periods before they are analyzed due to case backlog. As a result, selective loss of key components due to bacterial metabolism can make identifying and classifying ignitable liquid residues by their chemical composition and boiling point range very difficult. The ultimate goal of this project is to preserve ignitable liquid residues against microbial degradation as efficiently and quickly as possible. Field and laboratory studies were conducted to monitor microbial degradation of gasoline and other ignitable liquids in soil samples. In addition to monitoring degradation in potting soil, as a worst case scenario, the effect of soil type and season were also studied. The effect of microbial action was also compared to the effect of weathering by evaporation (under nitrogen in the laboratory and by the passive headspace analysis of the glass fragments from the incendiary devices in the field studies). All studies showed that microbial degradation resulted in the significant loss of n-alkanes and lesser substituted alkylbenzenes predominantly and quickly, while more highly substituted alkanes and aromatics were not significantly affected. Additionally, the residential soil during the fall season showed the most significant loss of these compounds over the course of 30 days. To combat this problem, a chemical solution is to be immediately applied to the samples as they are collected. Various household and commercial products were tested for their efficacy at low concentrations to eliminate all living bacteria in the soil. Triclosan (2% (w/v) in NaOH) proved to be the most effective at preserving ignitable liquid residues for at least 30 days.

The distribution and potential sources of 15 polycyclic aromatic hydrocarbons (PAHs) in soils and Digitaria eriantha in the vicinity of three South African coal-fired power plants, Matla, Lethabo and Rooiwal were determined by gas chromatography–mass spectrometry. An ultrasonic assisted dispersive liquid-liquid microextraction (UA-DLLME) method was developed for the extraction of polycyclic aromatic hydrocarbon in soil, followed by determination using gas chromatography mass spectrometry. The study showed that an extraction protocol based on acetonitrile as dispersive solvent and C2H2Cl2 as extracting solvent, gave extraction efficiencies comparable to conventional soxhlet extraction for soil samples. The extraction time using ultrasonication and the volume of the extraction solvent was also investigated. Using a certified reference material soil (CRM), the extraction efficiency of UA-DLLME ranged from 64 to 86% in comparison with the Soxhlet result of 73 to 95%. In comparison with the real sample, the CRM result did not show a significant difference at 95% C.I. The UA-DLLME proved to be a convenient, rapid, cost-effective and greener sample preparation approach for the determination of PAHs in soil samples. PAH compound ratios such as phenanthrene/phenanthrene + anthracene (Phen/ Phen + Anth) were used to provide a reliable estimation of emission sources. The total PAH concentration in the soils around three power plants ranged from 9.73 to 61.24 μg g−1, a range above the Agency for Toxic Substances and Disease Registry levels of 1.0 μg g−1 for a significantly contaminated site. Calculated values of the Phen/Phen + Anth ratio were 0.48±0.08, 0.44±0.05, and 0.38+0.04 for Matla, Lethabo and Rooiwal, respectively. The flouranthene/fluoranthene + pyrene (Flan/ Flan + Pyr) levels were found to be 0.49±0.03 for Matla, 0.44±0.05 for Lethabo, and 0.53±0.08 for Rooiwal. Such values indicate a xx pyrolytic source of PAHs. Higher molecular weight PAHs (five to six rings) were predominant, suggesting coal combustion sources. The carcinogenic potency B[a]P equivalent concentration (B[a] Peq) at the three power plants ranged from 3.61 to 25.25, indicating a high carcinogenic burden. The highest (B[a] Peq) was found in samples collected around Matla power station. It can, therefore, be concluded that the soils were contaminated with PAHs originating from coal-fired power stations. Nine metals (Fe, Cu, Mn, Ni, Cd, Pb, Hg, Cr and Zn) were analysed in soil and the Digitaria eriantha plant around three coal power plants (Matla, Lethabo and Rooiwal), using ICP-OES and GFAAS. The total metal concentration in soil ranged from 0.05 ± 0.02 to 1835.70 ± 70 μg g-1, 0.08 ± 0.05 to 1743.90 ± 29 μg g-1 and 0.07 ± 0.04 to 1735.20 ± 91 μg g-1 at Matla, Lethabo and Rooiwal respectively. The total metal concentration in the plant (Digitaria eriantha) ranged from 0.005 ± 0.003 to 534.87 ± 43 μg g-1 at Matla, 0.002 ± 0.001 to 400.49 ± 269 μg g-1 at Lethabo and 0.002 ± 0.001 to 426.91 ± 201 μg g-1 at Rooiwal. The accumulation factor (A) of less than 1 (i.e. 0.003 to 0.37) at power plants indicates a low transfer of metal from soil to plant (excluder). The enrichment factor values obtained (2.4 – 5) indicate that the soils are moderately enriched, with the exception of Pb that had significant enrichment of 20. The Geo-accumulation Index values of metals indicate that the soils are moderately polluted (0.005 – 0.65), except for Pb that showed moderate to strong pollution (1.74 – 2.53). / Chemistry / D. Phil. (Chemistry)

The distribution and potential sources of 15 polycyclic aromatic hydrocarbons (PAHs) in soils and Digitaria eriantha in the vicinity of three South African coal-fired power plants, Matla, Lethabo and Rooiwal were determined by gas chromatography–mass spectrometry. An ultrasonic assisted dispersive liquid-liquid microextraction (UA-DLLME) method was developed for the extraction of polycyclic aromatic hydrocarbon in soil, followed by determination using gas chromatography mass spectrometry. The study showed that an extraction protocol based on acetonitrile as dispersive solvent and C2H2Cl2 as extracting solvent, gave extraction efficiencies comparable to conventional soxhlet extraction for soil samples. The extraction time using ultrasonication and the volume of the extraction solvent was also investigated. Using a certified reference material soil (CRM), the extraction efficiency of UA-DLLME ranged from 64 to 86% in comparison with the Soxhlet result of 73 to 95%. In comparison with the real sample, the CRM result did not show a significant difference at 95% C.I. The UA-DLLME proved to be a convenient, rapid, cost-effective and greener sample preparation approach for the determination of PAHs in soil samples. PAH compound ratios such as phenanthrene/phenanthrene + anthracene (Phen/ Phen + Anth) were used to provide a reliable estimation of emission sources. The total PAH concentration in the soils around three power plants ranged from 9.73 to 61.24 μg g−1, a range above the Agency for Toxic Substances and Disease Registry levels of 1.0 μg g−1 for a significantly contaminated site. Calculated values of the Phen/Phen + Anth ratio were 0.48±0.08, 0.44±0.05, and 0.38+0.04 for Matla, Lethabo and Rooiwal, respectively. The flouranthene/fluoranthene + pyrene (Flan/ Flan + Pyr) levels were found to be 0.49±0.03 for Matla, 0.44±0.05 for Lethabo, and 0.53±0.08 for Rooiwal. Such values indicate a xx pyrolytic source of PAHs. Higher molecular weight PAHs (five to six rings) were predominant, suggesting coal combustion sources. The carcinogenic potency B[a]P equivalent concentration (B[a] Peq) at the three power plants ranged from 3.61 to 25.25, indicating a high carcinogenic burden. The highest (B[a] Peq) was found in samples collected around Matla power station. It can, therefore, be concluded that the soils were contaminated with PAHs originating from coal-fired power stations. Nine metals (Fe, Cu, Mn, Ni, Cd, Pb, Hg, Cr and Zn) were analysed in soil and the Digitaria eriantha plant around three coal power plants (Matla, Lethabo and Rooiwal), using ICP-OES and GFAAS. The total metal concentration in soil ranged from 0.05 ± 0.02 to 1835.70 ± 70 μg g-1, 0.08 ± 0.05 to 1743.90 ± 29 μg g-1 and 0.07 ± 0.04 to 1735.20 ± 91 μg g-1 at Matla, Lethabo and Rooiwal respectively. The total metal concentration in the plant (Digitaria eriantha) ranged from 0.005 ± 0.003 to 534.87 ± 43 μg g-1 at Matla, 0.002 ± 0.001 to 400.49 ± 269 μg g-1 at Lethabo and 0.002 ± 0.001 to 426.91 ± 201 μg g-1 at Rooiwal. The accumulation factor (A) of less than 1 (i.e. 0.003 to 0.37) at power plants indicates a low transfer of metal from soil to plant (excluder). The enrichment factor values obtained (2.4 – 5) indicate that the soils are moderately enriched, with the exception of Pb that had significant enrichment of 20. The Geo-accumulation Index values of metals indicate that the soils are moderately polluted (0.005 – 0.65), except for Pb that showed moderate to strong pollution (1.74 – 2.53). / Chemistry / D. Phil. (Chemistry)