Made available in DSpace on 2014-12-17T15:05:04Z (GMT). No. of bitstreams: 1 RogerioGA_DISSERT.pdf: 8092447 bytes, checksum: 8092c9fc8e1a9696dd331b3c086d01ac (MD5) Previous issue date: 2013-09-05 / The National Program of Professional Education Integration with Basic Education for Youngsters and Adults (PROEJA) Technical Professional Education Ensino M?dio has opened a new chapter in the history of education in Brazil, making possible the integration of basic education and professional education. This new form of education, which is still in its early implementation, presents a series of challenges to be overcome. Specifically about the teaching of Chemistry, didactic material to match PROEJA s specific needs is practically inexistent. Thus, this work has the purpose of developing didactic material for the teaching of Chemistry for Professional and Technological Education of Youngsters and Adults in the courses of Electronics, Technical Electronics and Maintenance and Support for Computing at Instituto Federal de Educa??o,Ci?ncia e Tecnologia do Rio Grande do Norte. This material aims at working chemical concepts of oxi-reduction reactions through a theme approach following Freire s conceptions for the teaching of Youngsters and Adults / O Programa Nacional de Integra??o da Educa??o Profissional com a Educa??o B?sica na Modalidade de Educa??o de Jovens e Adultos - Educa??o Profissional T?cnica de N?vel M?dio / Ensino M?dio (PROEJA) abriu um novo cap?tulo na hist?ria da educa??o de jovens e adultos, possibilitando a integra??o da educa??o profissional ? educa??o b?sica. Essa modalidade de educa??o, que ainda se encontra em fase inicial de implementa??o, apresenta uma s?rie de desafios a serem superados. No caso espec?fico de ensino de Qu?mica, ? praticamente inexistente material did?tico elaborado para atender ?s especificidades dos alunos do PROEJA. Nesse sentido, tivemos como prop?sito, no presente trabalho, o desenvolvimento de um material did?tico para o ensino de Qu?mica na Educa??o Profissional e Tecnol?gica de Jovens e Adultos nos cursos de eletr?nica, eletrot?cnica e manuten??o e suporte em inform?tica oferecidos pelo Instituto Federal de Educa??o,Ci?ncia e Tecnologia do Rio Grande do Norte. Esse material did?tico tem como objetivo trabalhar o conceito qu?mico de rea??es de oxirredu??o atrav?s de uma abordagem tem?tica seguindo as concep??es freireanas para Educa??o de Jovens e Adultos

Constructed wetlands and the soil filters are water treatment devices using the filter material that in most cases consists of natural river gravel, coarse sand or crushed stone. Master´s thesis deals with the research of cleaning effect of unconventional filtration materials, or more precisely with examination to load real waste water in a filtration column, to prove their ability to be used as an alternative medium that can ensure better cleaning effect. For the research work following metallurgical industry materials were used: fine slag and coarse slag 8-16 mm, materials from the natural character: zeolite, keramzit, a plastic material: PUR-foam. Also the traditional materials of fine gravel and coarse gravel were tested to compare the cleaning efficiency. Both the hydraulic and the cleaning efficiency of all above mentioned materials were tested. The examined hydraulic parameters are particularly porosity, hydraulic conductivity and suspended solids, turbidity and oxidation-reduction potential of both the inflow and outflow of the filter columns were determined. Accredited laboratory set the inflow and outflow of the filter columns BOD5, CODCr, total phosphorus, total nitrogen, nitrite, nitrate, ammonia and dissolved oxygen. By evaluating the results of the measurements it is determined which materials are suitable to be applied in the constructed wetlands and the soil filters. This filtration column was modeled by program HYDRUS and the result was compared with real results.

Philosophiae Doctor - PhD / The aim of this thesis is first, to evaluate various culture conditions to improve embryo development, and secondly, to analyze spent culture media for any biomarkers that may be predictive of embryo health. Single-step and sequential culture media were compared in both Planer and EmbryoScope™ incubators. Single-step media resulted in better blastocyst development compared to sequential media and the EmbryoScope™ incubation system showed slight improvements in embryo development than the Planer system. The benefits of supplementing the culture medium with either insulin or insulin-like growth factor 1 (IGF-1) or culturing in a 2% O2 environment, using two different strains of mice (hybrid and C57), as well as the suitability of these strains for quality control were compared. In insulin, hybrid embryos were slower to blastulate and had a lower blastocyst rate, whereas C57 embryos were slower to the morula and faster to blastocyst stages, and lower blastocyst rate than the controls. IGF-1 showed no difference in time-lapse morphokinetics (TLM) or blastocyst rates compared to controls in both hybrid and C57 embryos. Under 2% O2, hybrid embryos showed no significant difference in TLM up to the 8-cell stage, but slowed down afterwards, resulting in blastocysts with significantly lower cell counts than the 6% O2 group. The C57 embryos were slower to reach morula and expanded blastocyst, and had lower blastocyst rates in 2%O2 vs 6%O2. The C57 strain had significant slower overall embryo development for all time points than hybrid embryos in insulin, IGF-1 and ultra-low O2, as well as lower blastocyst rates. Measurement of growth differentiation factor 9 (GDF-9) and oxidation-reduction potential (ORP) in spent media as markers for embryo health were evaluated. Day 5 human blastocysts yielded higher pregnancy rates and GDF-9 levels in spent media compared to Day 6 blastocysts, but TLM parameters showed no impact on pregnancy outcome. In Day 6 blastocysts, the non-pregnant group showed significantly faster embryo development compared to the clinically pregnant group up to the 8-cell stage and start of blastulation. GDF-9 did not show any significant differences between non-pregnant and pregnant groups of Day 5 or Day 6 embryo transfers. ORP in spent media from good quality Day 3 embryos that developed into blastocysts were significantly higher than from those that did not, with no difference in control medium ORP. Spent media from arrested embryos showed lower ORP than their corresponding controls. Arrested embryos had slower development at syngamy, morula, blastulation and blastocyst stages. The single step medium in the EmbryoScope™ is the preferred choice for embryo culture. Insulin or IGF-1 media supplementation or 2% O2 culture did not provide any benefit to embryo development. The C57 mouse strain is more sensitive and may be better to detect changes in culture conditions, and therefore better model for quality control assays. GDF-9 values decrease from Day 5 to Day 6 which gives new insight to understanding the role of GDF-9 during embryogenesis. ORP in spent media indicate that embryos that developed into blastocysts did not contribute to ROS, but maintained ORP balance.

In this work, well-defined and stable thin films based on polythiophene and its derivative, are employed as the hole-injection contact of organic light-emitting diodes (OLED). The polymer films are obtained by the electropolymerization or the electrochemical doping/dedoping of a spin-coated layer. Their electrical properties and energetics are tailored by electrochemical adjustment of their doping levels in order to improve the hole-injection from the anode as well as the performance of small molecular OLEDs. By using dimeric thiophene and optimizing the electrodeposition parameters, a thin polybithiophene (PbT) layer is fabricated with well-defined morphology and a high degree of smoothness by electro-polymerization. The introduction of the semiconducting PbT contact layer improves remarkably the hole injection between ITO anode and the hole- transport layer (NPB) due to its favourable energetic feature (HOMO level of 5.1 eV). The vapor-deposited NPB/Alq3 bilayer OLEDs with a thin PbT interlayer, show a remarkable reduction of the operating voltage as well as enhanced luminous efficiency compared to the devices without PbT. Investigations have also been made on the influence of PbT thickness on the efficiency and I-V feature as well as device stability of the OLED. It is demonstrated that the use of an electropolymerization step into the production of vapor deposited molecular OLED is a viable approach to obtain high performance OLEDs. The study on the PbT has been extended to poly(3,4-ethylenedioxythiophene) (PEDT) and the highly homogenous poly(styrenesulfonate) (PSS) doped PEDT layer from a spin-coating process has been applied. The doping level of PEDT:PSS was adjusted quantitatively by an electrochemical doping/dedoping process using a p-tuoluenesulfonic acid containing solution, and the redox mechanism was elucidated. The higher oxidation state can remain stable in the dry state. The work function of PEDT:PSS increases with the doping level after adjusting at an electrode potential higher than the value of the electrochemical equilibrium potential (Eeq) of an untreated film. This leads to a further reduction of the hole-injection barrier at the contact of the polymeric anode/hole transport layer and an ideal ohmic behavoir is almost achieved at the anode/NPB interface for a PEDT:PSS anode with very high doping level. Molecular Alq3-based OLEDs were fabricated using the electrochemically treated PEDT:PSS/ITO anode, and the device performance is shown to depend on the doping level of polymeric anode. The devices on the polymer anode with a higher Eeq than that for the unmodified anode, show a reduction of operating voltage as well as a remarkable enhancement of the luminance. Furthermore, it is found that the operating stability of such devices is also improved remarkably. This originates from the removal of mobile ions such as sodium ions inside the PEDT:PSS by electrochemical treatment as well as the planarization of the ITO surface by the polymer film. By utilizing an Al/LiF cathode with an enhanced electron injection and together with a high Eeq- anode, a balanced injection and recombination of hole and electron is achieved. It leads to a further reduction of the operating voltage and to a drastic improvement of EL efficiency of the device as high as 5.0 cd/A. The results demonstrate unambiguously that the electrochemical treatment of a cast polymer anode is an effective method to improve and optimize the performance of OLEDs. The method can be extended to other polythiophene systems and other conjugated polymers in the fabrication of the OLEDs as well as organic transistors and solar cells.

The thesis entitled “Design and Development of Synthetic Methods using Metal-mediated and Metal-free Redox Reactions: Novel C-H Activations, Reductions and Oxidative Transformations” is presented in 4 chapters Chapter 1; Iodine catalyzed amination of benzoxazoles: efficient metal free route to 2-aminobenzoxazoles under mild conditions. The Chapter 1 of this thesis describes iodine catalyzed C-H activation of benzoxazole with primary and secondary amines to form oxidative aminated products. Selective C-H oxidation is a frontline area of modern chemical research as it offers the opportunities to new avenues and more direct synthetic strategies for the synthesis of complex organic molecules.1 In this context, transition metals such as palladium copper, nickel etc, are used extensively for the functional group directed C-H activation, and thus provides new, rapid, low-cost, and environmentally benign protocols for the construction of new chemical bonds.2 During the past two decades iodine and hypervalent iodine have been focus of great attention as they provide mild, chemoselective and environmentally benign strategies in contrast to toxic metal oxidants.3 In this chapter, a facile metal-free route of oxidative amination of benzoxazole with secondary or primary amines in the presence of catalytic amount of iodine (5 mol%) in aq tert-butyl hydroperoxide (1equiv) and AcOH (1.1 equiv) at ambient temperature, under the solvent-free reaction condition is presented. This user-friendly method to form C-N bonds produces tert-butanol and water as the by-products, which are environmentally benign. A wide range of benzoxazole derivatives containing electron-donating and electron-withdrawing groups were coupled with both primary and secondary amines (Scheme 1). Application of this methodology is demonstrated by synthesizing therapeutically active benzoxazoles by reacting 5-chloro-7-methylbenzoxazole with N-methylpiperazine and N-ethylhomopiperazine to obtain corresponding N-aminatedbenzaxozoles, which exhibit antidiarrhetic activity (Scheme 2).4 Scheme 2 Chapter 2: NIS catalyzed reactions. amidation of acetophenones and oxidative amination of propiophenones Chapter 2 is divided in to 2 parts. Part 1 describes the synthesis of α-ketoamides by using acetophenone and secondary amine in the presence of N-iodosuccinamide and TBHP in acetonitrile at room temperature, whereas Part 2 reveals the synthesis of 2-aminoketones by reacting aryl alkyl ketones and suitable secondary amine in the presence of NIS and TBHP. Part 1: Oxidative amidation, synthesis of α-ketoamide: Alpha α-ketoamides are important intermediates in organic synthesis that are present in a variety of natural products, and pharmaceutically active compounds. Herein, a mild and efficient conversion of acetophenones to α-ketoamide is documented by using aq.TBHP and N-iodosuccinamide (NIS) as a catalyst, at ambient temperature. This amidation reaction was found to be versatile as several aetophenone derivitives containing electron-withdrawing and electron-donating substituents underwent a facile amidation. It was also found that acetyl derivatives of heterocylic compounds could be easily converted to their corresponding ketoamides (few examples are shown in Scheme 3).5 Scheme3 Part 2 of Chapter 2 narrates a novel amination of propiophenone and its derivatives catalysed by NIS in the presence of TBHP to furnish their corresponding 2-aminoketone derivatives (Scheme 4). These derivatives are ubiquitous scaffolds that are present in a wide variety of therapeutic agents. Some of these compounds are used in the treatment of depression, smoking cessation, as monoamine uptake inhibitors, rugs for cancer. They are photoinitiators, precursors to β-aminoalcohols, such as pseudoephedrine analogues. 2-Aminoacetophenone analogues are also important intermediates for the formation of several heterocyclic compounds and are active moieties in several important drugs such as ifenprodil, Scheme 4. Chapter 3: Efficient oxidation of primary azides to nitriles This Chapter is divided in to 2 parts, which presents the oxidation of primary azides to their corresponding nitriles. Part 1: An Efficient oxidation of primary azides catalyzed by copper iodide: a convenient method for the synthesis of nitriles In Part 1, an efficient oxidation of primary azides catalyzed by copper iodide to their corresponding nitriles is reported. Herein, the oxidation of primary azide to nitrile is performed using catalytic amount of copper iodide, and aq TBHP in water at 100 ° C. This methodology is compatible with a wide range of primary benzylic azides that contain electron-donating and electron-withdrawing functional groups. The oxidation was found to be selective and a number of oxidizable functional groups were well-tolerated during the reaction conditions (few examples are shown in Scheme 5).6 Scheme 6 Furthermore, oxidation of secondary azides furnished the corresponding ketones in excellent yields (Scheme 6).6 In the Part 2 of Chapter 3, a non-metal catalysed oxidation of primary azides to nitriles at ambient temperature is reported. This part reveals the oxidation of primary azides to nitriles by employing catalytic amounts of KI (25 mol%), DABCO (25 mol%) and aq. TBHP (3 equiv., 70% solution in water). This reaction provides a good selectivity, as double and triple bonds were not oxidized under the reaction conditions. Additionally, chemoselective oxidation of benzylicazides against aliphatic azides increases the potential application of the present method (Scheme 7).7 Chapter 4: Chemoeselective reduction of olefins Part 1: Iron chloride catalysed aerobic reduction of olefins using aqueous hydrazine at ambient temperature Chapter 4 describes the reduction olefins and acetylenes, which is presented in two Parts. Part 1 documents utility of hydrazine (1.5 equiv) for the chemoselective reduction of nonpolarised carbon-carbon bond using iron catalysts. In this part, a chemoselective reduction of alkenes and alkynes in the presence of a variety of reducible functional groups is demonstrated (Scheme 8). The highlight of the present method is that the reduction proceeds well at room temperature and requires only 1.5 equiv of hydrazine hydrate. The olefin reduction by hydrazine depends upon the controlled release of diimide during the reduction. Generally, metal catalyzed reduction of olefins employ a large excess of hydrazine (10-20 equiv), which might be attributed to uncontrolled release of diimide during the reduction.8 Scheme 8 Part 2: Guanidine catalyzed aerobic reduction: a selective aerobic hydrogenation of olefins using aqueous hydrazine In Chapter 4, part 2, organocatalytic generation of diimide and its utility to reduce the double bonds is presented. Generation of diimide in situ by using organo catalysts and its use for the reduction of carbon-carbon double bond is one of the interesting topics in organic chemistry. It has been shown in this part of the thesis that the reduction of olefin at room temperature can be efficiently performed by using 10 mol% of guanidine nitrate, 2 equiv of aqueous hydrazine in oxygen atmosphere. This method tolerates a variety of reducible functional groups such as nitro, azido, and bromo and protective groups such as methyl ethers, benzyl ethers, and Cbz groups. It is also shown that terminal olefin can be selectively reduced in the presence of internal olefin (Scheme 9). Unlike other methods that employ diimide strategy, the present method is shown to be efficient in reducing substrates those contain internal double bonds such as cinnamyl alcohol and its derivatives

Exogenously supplied organoselenium compounds, capable of propagating a selenium redox cycle, were shown to supplement natural cellular defenses against oxidants generated during biological activity. Phenylaminoalkyl selenides were developed in our laboratory as novel substrate analogs for the enzyme dopamine beta-monooxygenase. Recently, phenylaminoalkyl selenides were found to protect plasmid DNA and Molecular beacons from oxoperoxynitrate – mediated damage by scavenging this oxidant and forming the corresponding selenoxides as the sole selenium – containing products. Rate constants were determined for the reactions of the phenylaminoalkyl selenoxides with GSH at physiological pH and 25 degrees C. The kinetic data obtained in current and previous research was subsequently used in a MatLab simulation, which showed the feasibility of selenium redox cycling by GSH in the presence of a cellular oxidant, oxoperoxynitrate. Loblolly pine (LP, Pinus taeda) is the primary commercial species in southern forests covering 11.7 million hectares. Somatic embryogenesis (SE) is an effective technique to implement production of high value genotypes of LP. SE is a multi-step process, which includes initiation of somatic embryo (SME) growth from tree tissue, maintenance and multiplication of early stage SMEs and the maturation / germination phase. In this work, we isolated a substance from stage 2 or 3 LP female gametophyte (FG) tissue that stimulates early stage SME growth, and characterized this substance as citric acid on the basis of 1H NMR and mass spectrometry. We then demonstrated that topical application of citric acid to SMEs stimulates embryo colony growth at p = 0.05 for 3 of the 5 genotypes tested. Phenylketonuria (PKU) is an autosomal recessive disorder caused by an impaired conversion of L-phenylalanine (L-Phe) to L-tyrosine (L-Tyr). A novel assay based on enzymatic - colorimetric methodology (ECA) was developed in order to detect elevated concentrations of L-Phe in undeproteinized plasma of PKU patients via continuous spectrophotometric detection. We report here that L-Phe concentrations in undeproteinized plasma measured using our ECA were comparable to those determined on an amino acid analyzer based on Pearson correlation coefficients and a Bland and Altman comparison.

No / Vitiligo is characterized by a patchy loss of inherited skin color affecting approximately 0.5% of individuals of all races. Despite the absence of the protecting pigment and the overwhelming evidence for hydrogen peroxide (H(2)O(2))-induced oxidative stress in the entire epidermis of these patients, there is neither increased photodamage/skin aging nor a higher incidence for sun-induced nonmelanoma skin cancer. Here we demonstrate for the first time increased DNA damage via 8-oxoguanine in the skin and plasma in association with epidermal up-regulated phosphorylated/acetylated p53 and high levels of the p53 antagonist p76(MDM2). Short-patch base-excision repair via hOgg1, APE1, and polymerasebeta DNA repair is up-regulated. Overexpression of Bcl-2 and low caspase 3 and cytochrome c levels argue against increased apoptosis in this disease. Moreover, we show the presence of high epidermal peroxynitrite (ONOO(-)) levels via nitrotyrosine together with high nitrated p53 levels. We demonstrate by EMSA that nitration of p53 by ONOO(-) (300 x 10(-6) M) abrogates DNA binding, while H(2)O(2)-oxidized p53 (10(-3) M) enhances DNA binding capacity and prevents ONOO(-)-induced abrogation of DNA binding. Taken together, we add a novel reactive oxygen species to the list of oxidative stress inducers in vitiligo. Moreover, we propose up-regulated wild-type p53 together with p76(MDM2) as major players in the control of DNA damage/repair and prevention of photodamage and nonmelanoma skin cancer in vitiligo.