Spelling suggestions: "subject:"2oxides - eynthesis"" "subject:"2oxides - asynthesis""
11 |
A complementary study of perovskites : combining diffraction, solid-state NMR and first principles DFT calculationsJohnston, Karen Elizabeth January 2010 (has links)
Perovskites, ABX₃, and their associated solid-solutions are a particularly important and attractive area of research within materials chemistry. Owing to their structural and compositional flexibility and potential physical properties they are one of the largest classes of materials currently under investigation. This thesis is concerned with the synthesis and structural characterisation of several perovskite-based materials using a combined approach of high-resolution synchrotron X-ray and neutron powder diffraction (NPD), solid-state Nuclear Magnetic Resonance (NMR) and first-principles Density Functional Theory (DFT) calculations. Initial investigations concentrated on room temperature NaNbO₃, a perovskite widely debated in the literatue. Published crystallographic data indicate NaNbO₃ possesses two crystallographically distinct Na sites in space group Pbcm. Whilst some of our materials appear in agreement with this (notably a commercially purchased sample) many of our laboratory-synthesised samples of NaNbO₃ routinely comprise of two phases, which we show to be the antiferroelectric Pbcm and polar P2₁ma polymorphs. Several different synthetic methods were utilised during this investigation and the quantity of each phase present was found to vary as a function of preparative method. ²³Na, ⁹³Nb and ¹⁷O DFT calculations were used in conjunction with experiment to aid in spectral analysis, assignment and interpretation. In addition, ab initio random structure searching (AIRSS) was utilised in an attempt to predict the most stable phases of NaNbO₃. This proved to be both successful and highly informative. A series of NaNbO₃-related solid-solutions, namely K[subscript(x)]Na[subscript(1-x)]NbO₃ (KNN), Li[subscript(x)]Na[subscript(1-x)]NbO₃ (LNN) and Na[subscript(1-x)]Sr[subscript(x/2)]□[subscript(x/2)]NbO₃ (SNN) have also been synthesised and characterised. The substitution of K⁺ , Li⁺ and Sr²⁺ cations onto the A site appears to produce the same polar P2₁ma phase initially identified in the room temperature NaNbO₃ investigation. The abrupt change in cation size in the KNN and LNN series, and the introduction of vacancies in the SNN series, is thought to result in a structural distortion which, in turn, causes the formation of the P2₁ma phase. A low temperature synchrotron X-ray powder diffraction study (12 < T < 295 K) was completed for a sample of NaNbO₁ composed of the P2₁ma polymorph (~90%) and a small quantity of the Pbcm phase (~10%). A region of phase coexistence was identified between the P2₁ma, R3c and Pbcm phases over a relatively large temperature range. Full conversion of the P2₁ma phase to the low temperature R3c phase was not possible and, consistently, the P2₁ma phase was the most abundant phase present. Factors such as structural, strain, crystallite size and morphology are thought to be crucial in determining the exact phases of NaNbO₃ produced, both at low and room temperature. The solid-solution La[subscript(1-x)]Y[subscript(x)]ScO₃ was also investigated. Compositions x = 0, 0.2, 0.4, 0.6, 0.8 and 1 were successfully synthesised and characterised. Refined high-resolution NPD data indicates that an orthorhombic structure, in space group Pbnm, was retained throughout the solid-solution. Using ⁴⁵Sc and ⁸⁹Y MAS NMR each sample was found to exhibit disorder, believed to result from both a distribution of quadrupole and chemical shifts. NMR parameters were calculated for several model Sc and Y compounds using DFT methods to determine the feasibility and accuracy of ⁴⁵Sc and ⁸⁹Y DFT calculations. These proved successful and subsequent calculations were completed for the end members LaScO₃ and YScO₃. DFT calculations were also utilised to gain insight into the disorder exhibited in the La[subscript(1-x)]Y[subscript(x)]ScO₃ solid-solution.
|
12 |
Preliminary study of modeling of NO formation during black liquor combustionRompho, Nopadol 21 February 1997 (has links)
The importance of two sources of NO formation, nitrogen in combustion air
and nitrogen in the fuel, during black liquor combustion was studied using a laminar
entrained flow reactor. Pyrolysis and combustion experiments were conducted in
nitrogen atmosphere and in a mixture of argon and helium in the composition 99%
argon, 1% helium. The experiments were performed at three different temperatures:
700, 900, and 1100��C and at two residence times: 0.6 and 1.6 seconds. The results
indicated that there was NO formation from the combustion air which was found to be
prompt NO. There was NO formation from combustion air at all temperatures, and it
decreased as temperature increased. Depending on conditions, prompt NO formation
accounted for 6-80% of the total NO formation.
NO reduction experiments were conducted to investigate the effect of molten
sodium carbonate on NO reduction. The experiments were performed at two different
temperatures, 800��C which is lower than the melting point of sodium carbonate and
900��C which is higher than the melting point of sodium carbonate. The rate constant
for NO reduction was calculated and was found to agree well with that obtained in a
previous study. The effect of the molten sodium carbonate on NO reduction was found to be negligible during black liquor pyrolysis. The rate in absence of any reducing gas
components could explain NO reduction during black liquor combustion only to a
limited extent.
Models for nitrogen evolution during pyrolysis and combustion were developed
by using data from previous studies. A model for nitrogen release during pyrolysis was
developed as a function of residence time and temperature. Nitrogen release during
pyrolysis was also found to be directly proportional to carbon release and the rate of
nitrogen evolution with respect to the rate of carbon evolution decreased as
temperature increased. / Graduation date: 1997
|
13 |
The protein and peptide mediated syntheses of non-biologically-produced oxide materialsDickerson, Matthew B. 09 July 2007 (has links)
The research detailed in this dissertation is focused on the use of biomolecules (i.e., peptides and proteins) to form non-biologically produced materials under mild reaction conditions (i.e, neutral pH, aqueous solutions, and room temperature). The peptides utilized in the studies detailed in this dissertation were identified through the screening of single crystal rutile TiO2 substrates or Ge powder with a phage-displayed peptide library.
Twenty-one peptides were identified which possessed an affinity for Ge. Those peptides possessing a basic isoelectric point as well as hydroxyl- and imidazole-containing amino acid residues were found to be the most effective in precipitating amorphous germania from an alkoxide precursor.
The phage-displayed peptide library screening of TiO2 substrates yielded twenty peptides. The titania formation activity of these peptides was found to correlate with the number of positive charges they carried. The titania materials generated by the library-identified and designed peptides were found to be composed of amorphous titania as well as <10 nm anatase and/or monoclinic TiO2 crystallites.
Four recombinant proteins, derived from the amino acid sequences of proteins (silaffins) associated with biosilicification in diatoms, were also investigated for titania precipitation activity. The two most basic of these recombinant silaffins, rSil1L and rSilC, were able to induce the formation of titania. The titania precipitates generated by rSil1L were found to be similar to those produced by the phage-displayed library identified peptides. The second recombinant silaffin, rSilC, was found to produce hollow spheres of titania, which, following dehydration, were observed to transform into larger, solid spheres composed of radially aligned columns of rutile TiO2. The highly repetitive nature of the rSilC s amino acid sequence is believed to be responsible for the differences in TiO2 polymorph generated by the different recombinant silaffins and peptides.
This dissertation also details research conducted on the formation of titania utilizing rSilC conjugated to synthetic and biogenic silica surfaces. These silica surfaces were functionalized with a newly developed drendritic growth technique. The dendritic functional-group amplification process was demonstrated to increase the loading of hexahisitidine tagged proteins on silica surfaces by more than 40%, as compared to traditional immobilization procedures.
|
14 |
The protein and peptide mediated syntheses of non-biologically-produced oxide materialsDickerson, Matthew B. January 2007 (has links)
Thesis (Ph. D.)--Materials Science and Engineering, Georgia Institute of Technology, 2008. / Committee Chair: Sandhage, Kenneth; Committee Co-Chair: Kröger, Nils; Committee Co-Chair: Naik, Rajesh; Committee Member: Hud, Nicholas; Committee Member: Marder, Seth.
|
15 |
Synthesis of transition metal oxides and hydroxides by soft-chemistry routes.January 2009 (has links)
Chan, Mui. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2009. / Includes bibliographical references. / Abstract also in Chinese. / Abstract --- p.i / Abstract (Chinese) --- p.iii / Declaration --- p.v / Acknowledgement --- p.vi / Table of Contents --- p.viii / List of Tables --- p.xiv / List of Figures --- p.xv / Chapter Chapter 1: --- Introduction / Chapter 1.1 --- Overview --- p.1 / Chapter 1.2 --- Soft-Chemistry --- p.7 / Chapter 1.2.1 --- Sol-Gel Method --- p.7 / Chapter 1.2.2 --- Co-precipitation --- p.9 / Chapter 1.2.3 --- Microemulsion --- p.10 / Chapter 1.3 --- Application of Hydrothermal/Solvothermal Methods in Materials Synthesis --- p.12 / Chapter 1.3.1 --- Fundamentals of Hydrothermal and Solvothermal Methods --- p.12 / Chapter 1.3.2 --- Advantages of Hydrothermal/Solvothermal Methods in contrast to Conventional Synthetic Approaches --- p.13 / Chapter 1.3.3 --- Hydrothermal and Solvothermal Preparation of Materials --- p.14 / Chapter 1.4 --- Application of Transition Metal Oxides As Functional Materials --- p.15 / Chapter 1.5 --- Aim and Scope of Work --- p.16 / Chapter 1.6 --- References --- p.17 / Chapter Chapter 2: --- Solvothermal and Hydrothermal Template Free Synthesis of ZnO Microspheres / Chapter 2.1 --- Introduction --- p.23 / Chapter 2.2 --- Experimental Section --- p.25 / Chapter 2.2.1 --- Synthesis of ZnO Microspheres by Solvothermal Method --- p.25 / Chapter 2.2.2 --- Synthesis of ZnO Microspheres by Hydrothermal Method --- p.26 / Chapter 2.2.3 --- Doping ZnO Microspheres with Silver or Gallium by Solvothermal Method --- p.26 / Chapter 2.2.4 --- Characterization --- p.27 / Chapter 2.2.5 --- Measurement of Photocatalytic Activity --- p.29 / Chapter 2.3 --- Results and Discussion --- p.30 / Chapter 2.3.1 --- X-Ray Diffraction Analysis --- p.30 / Chapter 2.3.1.1 --- ZnO-HT and ZnO-ST --- p.30 / Chapter 2.3.1.2 --- ZnO-ST: Effect of Different Concentrations of Zinc Acetate --- p.33 / Chapter 2.3.1.3 --- Doping ZnO-ST with Silver or Gallium --- p.34 / Chapter 2.3.2 --- SEM study --- p.36 / Chapter 2.3.2.1 --- ZnO-HT and ZnO-ST --- p.36 / Chapter 2.3.2.2 --- ZnO-HT-Different Volume Ratios of Ethylene Glycol to Water --- p.37 / Chapter 2.3.2.3 --- ZnO-ST --- p.39 / Chapter 2.3.2.3.1 --- Different Volume Ratios of Benzyl Alcohol to Ethylene Glycol --- p.40 / Chapter 2.3.2.3.2 --- Different Concentrations of Zinc Acetate --- p.41 / Chapter 2.3.2.3.3 --- Different Concentrations of Urea --- p.42 / Chapter 2.3.3 --- TEM Study --- p.44 / Chapter 2.3.3.1 --- TEM and HRTEM of ZnO-HT --- p.44 / Chapter 2.3.3.2 --- TEM and HRTEM of ZnO-ST --- p.45 / Chapter 2.3.3.3 --- TEM Images of Ga-Doped ZnO-ST --- p.47 / Chapter 2.3.3.4 --- TEM Images of Ag-Doped ZnO-ST --- p.49 / Chapter 2.3.4 --- Nitrogen Adsorption and Desorption --- p.50 / Chapter 2.3.5 --- X-Ray Photoelectron Spectroscopy --- p.52 / Chapter 2.3.5.1 --- XPS Study of ZnO-ST --- p.52 / Chapter 2.3.5.2 --- XPS Study of ZnO-HT --- p.54 / Chapter 2.3.5.3 --- XPS Study of Silver Doped ZnO-ST --- p.56 / Chapter 2.3.5.4 --- XPS Study of Gallium Doped ZnO-ST --- p.58 / Chapter 2.3.6 --- FR-IR Spectra --- p.60 / Chapter 2.3.7 --- Photocatalytic Activity on Degradation of Methylene Blue --- p.61 / Chapter 2.3.8 --- Proposed Formation Mechanism for ZnO-ST --- p.64 / Chapter 2.3.9 --- Proposed Formation Mechanism for ZnO-HT --- p.68 / Chapter 2.3.10 --- Optical Property of ZnO Microspheres --- p.69 / Chapter 2.4 --- Conclusion --- p.73 / Chapter 2.5 --- References --- p.74 / Chapter Chapter 3: --- Synthesis of Hierarchical Porous Lithium Niobate Submicrometer Rods / Chapter 3.1 --- Introduction --- p.79 / Chapter 3.2 --- Experimental Section --- p.81 / Chapter 3.2.1 --- Characterization --- p.82 / Chapter 3.3 --- Results and Discussion --- p.83 / Chapter 3.3.1 --- X-Ray Diffraction Analysis --- p.83 / Chapter 3.3.2 --- SEM Study --- p.86 / Chapter 3.3.2.1 --- Surfactants Dependent Morphologies Change --- p.86 / Chapter 3.3.2.2 --- Concentrations of CTAB --- p.87 / Chapter 3.3.2.3 --- Time Dependent Morphologies Change --- p.88 / Chapter 3.3.3 --- TEM Study --- p.91 / Chapter 3.3.5 --- XPS Analysis --- p.93 / Chapter 3.3.6 --- BET Analysis --- p.96 / Chapter 3.3.7 --- Proposed Formation Mechanism --- p.97 / Chapter 3.3.7.1 --- Effect of Microemulsion --- p.97 / Chapter 3.3.7.2 --- Effect of CTAB --- p.98 / Chapter 3.3.7.3 --- Ostwald Ripening --- p.99 / Chapter 3.3.7.4 --- Formation of LiNi3O8 --- p.101 / Chapter 3.4 --- Conclusion --- p.102 / Chapter 3.5 --- References --- p.103 / Chapter Chapter 4: --- Flower-Like α-Nickel Hydroxide synthesized by hydrothermal method / Chapter 4.1 --- Introduction --- p.106 / Chapter 4.2 --- Experimental Section --- p.108 / Chapter 4.2.1 --- Synthesis of Nickel Hydroxide by Hydrothermal Method --- p.108 / Chapter 4.2.2 --- Characterization --- p.109 / Chapter 4.3 --- Results and Discussion --- p.111 / Chapter 4.3.1 --- X-Ray Diffraction Analysis --- p.111 / Chapter 4.3.2 --- SEM Study --- p.115 / Chapter 4.3.3 --- TEM and HRTEM Study --- p.116 / Chapter 4.3.4 --- XPS Analysis --- p.117 / Chapter 4.3.5 --- FT-IR Analysis --- p.119 / Chapter 4.3.6 --- BET analysis --- p.120 / Chapter 4.3.7 --- Proposed Formation Mechanism of the Flower like α-Ni(OH)2 --- p.122 / Chapter 4.4 --- Conclusion --- p.123 / Chapter 4.5 --- References --- p.124 / Chapter Chapter 5: --- Conclusions and Future Work / Chapter 5.1 --- Conclusions --- p.127 / Chapter 5.2 --- Future work --- p.129
|
16 |
Investigation Of Transition Metal Oxides Of Perovskite, Pyrochlore And Rutile Structures Towards Realization Of Novel MaterialsMani, Rohini 07 1900 (has links)
Materials chemistry is essentially concerned with the design/synthesis of new solids endowed with functional properties that could be of relevance to today’s materials technology. Among the large variety of solid materials that attract attention, metal oxides continue to contribute significantly to current materials chemistry. A wide variety of oxide materials (based on rocksalt, spinel, corundum, perovskite, garnet, pyrochlore and other structures) and their properties have been investigated over the years. Most of these oxides are derived from the transition metals.
Transition metal oxides with structures derived from metal-oxygen (MO6) octahedra, in particular, display an array of exotic properties with potential or proven technological application. While it is traditionally believed that the partially filled d shell (dn : 0 < n < 10) of the transition metal atoms plays a crucial role in deciding the electronic properties, the significance of d0 metal atoms for the properties (and structure) of transition metal oxides is not fully recognized. Magnetism (SrRuO3, Fe3O4), metallicity (ReO3, LaNiO3), colossal magnetoresistance (La1-xCaxMnO3) and superconductivity (La2xSrxCuO4, Sr2RuO4) are some of the properties that can be traced to the presence of partially filled d shell, while properties like ferroelectricity (BaTiO3), piezoelectricity (PbZr1-xTixO3) and nonlinear optical response (LiNbO3) could be traced to the presence of transition metals (TiIV, ZrIV, NbV) with d0 electronic configuration. The empty d orbitals on the metal atoms constitute the low lying unoccupied states (LUMO) that mix with the highest occupied states (HOMO) of the ligand atoms (oxygen) through special chemical bonding effects (second order Jahn-Teller effect, SOJT). This mixing results, among others, in out-of-centre distortion(s) of the MO6 octahedra and this distortion is at the heart of several properties mentioned above.
Among the transition metal oxide structures based on MO6 octahedra, three structures are noteworthy: the perovskite, the pyrochlore and the rutile. The AMO3 perovskite structure consists of a three-dimensional framework of corner sharing MO6 octahedra in which the A cation occupies the dodecahedral site surrounded by twelve oxide ions. The perovskite structure can accommodate a large variety of substitutions at both the A and the M sites as well as vacancies at the A/O sites, giving a large number of derivatives. Several variants of the perovskite structure are also known, for instance, the layered perovskites and ordered perovskites. Many nonperovskite structures are also known for the composition AMO3 : hexagonal YMnO3 is an alternative structure for AMO3 composition where manganese exists as MnO5 trigonal bipyramids. The A2M2O7 pyrochlore structure is also based on a corner-connected network of MO6 octahedra which interpenetrates an A2O network. The rutile (TiO2) is a well-known structure consisting of chains of edge-sharing MO6 octahedra, which are connected through corners to adjacent chains.
A large number of oxide materials based on the above three structure types have been reported : for example, perovskite [Ba3ZnTa2O9 (microwave telecommunication ceramic), Pb3MgNb2O9 (relaxor ferroelectric), Bi4Ti3O12 (high temperature ferroelectric)], pyrochlore [Nd2Mo2O7 (metallic ferromagnet), AOs2O6 for A = K, Rb, Cs (superconductor)] and rutile [TiO2 (photocatalyst), CrO2 (metallic ferromagnet), VO2 (insulator-metal transition)]. Considering the current interest in oxide materials of these three structure types which continue to generate new variants and novel properties, we undertook the present research project to synthesize new derivatives of these structure types, and characterize their structures and relevant electronic properties. In doing so, we recognized that synthesis based on an understanding of the reactivity of the constituents and crystal chemistry of the expected products plays a crucial role in this effort. Accordingly, we tailored several new compositions of AMO3, A2M2O7 and MO2 stoichiometries and adopted appropriate methodologies for their synthesis. We have characterized the structures and properties of the solid products by means of state-of-the-art methods available to us.
There are two main approaches to the synthesis of nonmolecular inorganic solids: conventional ceramic route and chimie douce / soft chemistry routes. In the ceramic route, solid reactants are heated at elevated temperatures for long durations with intermittent mixing/grinding until the reaction is complete. Chimie douce routes, on the other hand, utilize gentle reactions such as dehydration, decomposition, intercalation, ion exchange, and so on to synthesize the desired phases. The ceramic route generally provides access to the thermodynamically controlled product(s), while chimie douce routes allow access to metastable phases (kinetically controlled product(s)). Disadvantages notwithstanding, the ceramic route has been the mainstay of materials chemistry and several important materials continue to be discovered / synthesized by this route. The choice of the synthetic route based on an understanding of the crystal chemical preferences and the reactivities of the constituents involved is often crucial to achieve the desired final products.
The present thesis is devoted to the synthesis and investigation of MO6 octahedra-based oxides belonging to the perovskite, pyrochlore and rutile structure types wherein we have explored alternate synthetic strategies (perovskite-based Ba3MM'2O9 telecommunication ceramics and a solution route for the synthesis of ruthenium-based pyrochlores) and probed structure-property relations of perovskite oxides (Ba3MM'M''O9 oxides for various M/M'/M'' atoms) as well as formation of new derivatives of layered Aurivillius phases. In addition, we have also synthesized new noncentrosymmetric oxides possessing the YMnO3 structure. Our investigation of rutile based oxides has resulted in the discovery of a new lead-free relaxor ferroelectric material, FeTiTaO6. Given that the lone pair PbII:6s2 plays a crucial role in the ferroelectric properties of Pb-based perovskite oxides, we have also investigated members of the Pb1-xLix/2Lax/2TiO3 system for their structure and dielectric response.
The present thesis describes the results of these investigations in eight chapters. Chapter 1 provides a general introduction to oxides of the perovskite, pyrochlore and rutile structures. In Chapter 2, we describe a new one-pot metathesis strategy for the synthesis of dielectric ceramics Ba3MM'2O9 (M = Mg, Ni, Zn; M' = Nb, Ta). Rietveld refinement of X-ray diffraction data shows near-complete ordering of M-site ions in many cases. The dielectric properties of the products synthesized are found to be in reasonable agreement with reported data. The synthesis of ordered materials at lower temperatures (~1100 °C) than that employed in the conventional ceramic route (~1500 °C) is a significant result of this work.
Chapter 3 presents a study of Ba3MIIMIVWO9 (MII = Ca, Zn; MIV = Ti, Zr) perovskite oxides for the purpose of synthesizing new dielectric ceramic materials and to gain understanding of the factors that stabilize 3C vs. 6H structures. In general, a 1:2-ordered 6H perovskite structure is stabilized at high temperatures (1300 °C) for all of the Ba3MIITiWO9 oxides investigated. An intermediate phase possessing a partially ordered 1:1 double perovskite (3C) structure with the cation distribution, Ba2(Zn2/3Ti1/3)(W2/3Ti1/3)O6, is obtained at 1200 °C for Ba3ZnTiWO9. A metastable perovskite, Ba3CaZrWO9, that adopts the 1:1 3C structure has also been synthesized by a low-temperature metathesis route. Besides yielding several new perovskite oxides that may be useful as dielectric ceramics, the investigation provides new insights into the complex interplay of crystal chemistry (tolerance factor) and chemical bonding (anion polarization and d0-induced distortion of metaloxygen octahedra) in the stabilization of 6H versus 3C perovskite structures for the Ba3MIIMIVWO9 series.
In Chapter 4, we describe the synthesis and investigation of the structure and dielectric properties of Ba3MIIITiMVO9 (MIII = Fe, Ga, Y, Lu; MV = Nb, Ta, Sb) perovskite oxides. The MV = Nb, Ta oxides adopt disordered/partially ordered 3C perovskite structures, where all the MIII/Ti/MV metal-oxygen octahedra are corner-connected. In contrast, the MV = Sb oxides show a distinct preference for the 6H structure, where SbV/TiIV metal-oxygen octahedra share a common face, forming (Sb,Ti)O9 dimers, that are corner-connected to the MIIIO6 octahedra. Investigation of dielectric properties of MIII = Y/Lu, MV = Nb/Ta oxides reveals a normal low loss dielectric behaviour with ε = 30 – 50 in the temperature range 50 – 350 °C. The MIII = Fe, MV = Nb/Ta members show a dielectric behaviour similar to relaxor ferroelectric materials.
Chapter 5 deals with a study of isomorphous substitution of several metal atoms in two Aurivillius structures, Bi5TiNbWO15 and Bi4Ti3O12, in an effort to probe structure-property correlations. These investigations have led to the synthesis of new derivatives, Bi4LnTiMWO15 (Ln, = La, Pr; M = Nb, Ta), as well as Bi4PbNb2WO15 and Bi3LaPbNb2WO15, that largely retain the Aurivillius intergrowth structure of the parent oxide Bi5TiNbWO15, but characteristically tend toward a centrosymmetric / tetragonal structure for the Ln-substituted derivatives. On the other hand, coupled substitution, 2TiIV Æ MV + FeIII in Bi4Ti3O12, yields new Aurivillius phases, Bi4Ti3-2xNbxFexO12 (x = 0.25, 0.50) and Bi4Ti3-2xTaxFexO12 (x = 0.25) that retain the orthorhombic noncentrosymmetric structure of the parent Bi4Ti3O12.
Chapter 6 describes the design and synthesis of a new series of noncentrosymmetric oxides, R3Mn1.5CuV0.5O9 (R = Y, Ho, Er, Tm, Yb, Lu) possessing the YMnO3 structure. Investigation of the Lu-Mn-Cu-V-O system revealed the existence of an isostructural solid solution series, Lu3Mn3-3xCu2xVxO9 for 0 < x ≤ 0.75. Magnetic and dielectric properties of the oxides are consistent with a random distribution of Mn3+, Cu2+ and V5+ atoms that preserves the noncentrosymmetric RMnO3 structure.
An exploratory investigation of the synthesis, structure and electronic properties of new ruthenium(IV) pyrochlore oxides and their manganese-substituted derivatives is presented in Chapter 7. The richness of the electronic properties of ruthenium-based metal oxides is affirmed by the results which revealed several novel electronic ground states : a metallic and Pauli paramagnetic state for BiPbRu2O6.5 that turns into a semiconducting ferromagnetic spin-glass state at 50 K for BiPbRuMnO6.5 ; a metallic state that likely shows a charge density wave (CDW) instability at 50-225 K for Bi1.50Zn0.50Ru2O6.75, that is suppressed by manganese substitution in Bi1.50Zn0.50Ru1.75Mn0.25O6.50, and a metallic ferromagnetic spin-glass-like state for Pb2Ru1.75Mn0.25O6.15.
We describe the investigation of the structure and dielectric properties of rutile-based MTiTaO6 (M = Al, Cr, Fe) in Chapter 8. All the oxides possess disordered rutile structure. FeTiTaO6 shows a strong relaxor ferroelectric effect, while CrTiTaO6 shows a weaker relaxor ferroelectric behaviour. This work is significant for two reasons: the new material is lead-free and it is based on the rutile structure, unlike the conventional relaxors which are mostly derived from the perovskite structure.
The work presented in the thesis is carried out by the candidate as a part of the Ph.D. training programme and most of it has been published in the literature. She hopes that the studies reported here will constitute a worthwhile contribution to materials chemistry in general.
|
17 |
Perovskite Related Oxides: Development Of New Synthetic Methods, Materials And PropertiesMandal, Tapas Kumar 09 1900 (has links)
Oxides of ABO3 composition (A = alkali, alkaline earth or rare earth metal in general, B = transition metal) constitute a large family of metal oxides of current interest to solid state and materials chemistry. Among the several structure types exhibited by ABO3 oxides (ilmenite, LiNbO3, perovskite, YAIO3/YMnO3, KSbO3, pyrochlore, among others), the perovskite structure is probably the most well known and widely investigated. The ideal perovskite structure consists of a three-dimensional (3D) framework of corner-sharing BO6 octahedra in which the A cation resides in the dodecahedral site surrounded by twelve oxide ions. The ideal cubic structure occurs when the Gold Schmidt’s tolerance factor, t = (rA + ro)/{V2 (rB + ro)}, adopts a value of unity and the A-O and B-O bond distances are perfectly matched. The flexibility of the perovskite structure towards a wide variety of substitutions at both A and B sites gives rise to a very large number (several hundreds) of perovskite derivatives with subtle variations in structure. The perovskite structure can also tolerate vacancies at both the A and O sites giving ordered superstructures. Members of y4BO3 oxides have numerous properties that find technological application, such as nonlinear optical response (LiNbO3), Ferro electricity (BaTiO3), piezoelectricity (PbZn_xTixO3), magneto ferroelectricity (YMnO3), superconductivity (Bai_xKxBi03)5 colossal magnetoresistance (La^xCaxMnO3) and ionic conductivity [(Lil_a)TiO3]
Ordering of cations at the A and B sites of the perovskite structure is an important phenomenon. Ordering of B site cations in double (/42BB'O6) and multiple (/43BB'2Og) perovskites gives rise to newer and interesting materials properties For example, 1*1 ordered Sr2FeMoO6 and Sr2FeReO6 are half-metallic ferrimagnets; Pb3MgNb2O9 is a relaxor ferroelectric; Ba3ZnTa2O9 is a low loss dielectric used in telecommunication and, last but not least, Ba3CoNb2O9 is a visible light driven photocatalyst. Realization of these properties in these materials depends crucially on the ordering/or otherwise of the B site cat ions in the perovskite structure. Furthermore, ordering of not only the metal atoms but also the oxygen/oxygen vacancies in the perovskite structure is equally important for the occurrence of superconductivity in the cuprate superconductor, YBa2Cu3O7.
The ideal perovskite structure gives way to hexagonal YMnO3/YAIO3 structure for smaller A cations (tolerance factor, t < 1). Oxides of this structure are attracting current attention for the realization of multiple magnetoferroic properties. On the other hand, for larger A cations (tolerance factor, t > 1), various perovskite polytypic structures are formed. For example, BaNiO3 forms a 2H polytypic structure, SrMnO3 and BaRuO3 adopts a 4H and 9R structures respectively, where the SO6 octahedra share faces or faces and corners.
Besides the foregoing 3D perovskites, a number of layered variants of the perovskite structure are also known. The most common layered perovskites are the Aurivillius phases, (Bi2O2)[A»-iBnO3n+iL the Ruddlesden-Popper phases, /4'2|7ln_iBnO3n+1], and the Dion-Jacobson phases, A[An^BnOzn+-\]' The two-dimensional (2D) perovskite unit, [^n-iBnOsn+i], which could be visualized as formed by slicing the 3D perovskite structure along <001>p is common for all the three layered perovskite series. The perovskite slabs are stacked alternately with various charge-balancing units, for example, with [Bi2O2]2+ in the Aurivillius phases and two alkali/alkaline earth cations (A+JA2+) in the Ruddlesden-Popper phases etc. Members of the layered perovskites are also important from the point of view of materials properties. For example, 2D magnetism (K2NiF4), superconductivity (La2-xSrxCuO4), ion exchange, Bronsted acidity, intercalation, exfoliation (K2La2Ti3Oio and CsCa2Nb3O10), photo catalysis (Rb2La2Ti30io) are some of the important materials properties found in layered perovskites. The high Tc-superconductors, Bi2Sr2CaCu2O8+XJ TI2Ba2Ca2Cu3Oi0, TIBa2Ca2Cu3O9 and HgBa2Ca2Cu3O8+x, also belong to the family of layered perovskites where the defective perovskite cuprate sheets are interleaved by other 2D entities like (Bi2O2), (TI2O2), (TIO) or (HgOx). In addition, Aurivillius phases, such as Bi2SrTa209 and Bi325Lao75Ti3Oi2, in thin film geometry are candidate materials for non-volatile ferroelectric memory devices.
Synthesis plays a key role in realizing new structures and materials properties for ABO3 oxides. The conventional synthetic methods (ceramic method) involve mixing and heating of solid reactants at elevated temperatures. Although this approach continues to be employed to synthesize new materials, it is often limited by the fact that it yields thermodynamically stable phases. Since many of the perovskite oxides showing useful materials properties are metastable in nature and are required in the form of fine particles (free-standing / monodisperse / submicron or nanometer dimensions) for application, the ceramic methods are of no avail for this purpose. Therefore, materials chemists constantly endeavor to develop alternate synthetic routes that enable them to synthesize novel oxides under mild conditions. Typical examples of metastable perovskites are: the super conducting cuprates (e.g. TlosPbosS^CaC^Og) and perovskite based lithium ion conductors (La2/3-xLi3XDi/3-2xTiO3). Also the control of oxidation states in double perovskites, such as Sr2FeMoO6 and Sr2FeRe06 and pyrochlores such as Pb2MnReC>6, cannot be achieved by conventional means. Therefore, the synthesis of such metastable phases requires special synthetic strategies that involve soft chemistry (chimie douce) methods where mild reactions/reaction conditions are employed to access metastable phases.
The present thesis is mainly devoted to an investigation of perovskite related oxides towards developing new synthetic strategies and materials as well as exploring hydrogen insertion - a novel materials property - in certain members of this family. Solid-state metathesis (SSM) reactions provide a convenient route for the synthesis of a wide variety of non-oxide ceramic materials such as, bondes, carbides, silicides, pnictides and chalcogenides. A typical metathesis reaction, for example,
M0CI5 + 5/2 Na2S -» MoS2 + 5 NaCI + 1/2 S (1) involves exchange of atoms/ions between the reactants and is accompanied by a large enthalpy change (AHm = - 890 kJ mol"1) and high adiabatic reaction temperature (Tm = 1413 °C). The reactions are often self-propagating and believed to be driven by the formation of stable salt byproducts such as alkali halides with high lattice energy. In our laboratory we have developed a different kind of metathesis reaction for the synthesis of perovskite related oxides, a typical example being,
K2La2Ti30io + 2 BiOCI -* [Bi2O2]La2Ti3O10 + 2 KCI.
A major difference between metathesis reactions (1) and (2) is that unlike (1), reaction (2) is not self-propagating, requiring longer duration. In this study, we have investigated metathesis reactions of the second kind at some length for the synthesis of perovskite related oxides. We found that rocksalt oxides such as UMO2 (M = Mn, Co) and Li2TiO3 constitute convenient precursors for the formation of v4BO3 perovskite oxides in metathesis reactions with appropriate reaction partners such as halides, oxyhalides or sulphates,
LiCoO2 + LaOCl -» LaCoO3 + LiCt (3)
LiMnO2 + LaOCl + x/2 O2 -> LaMnO3+x + LiCI (4)
Li2TiO3 + PbSO4 -» PbTiO3 + Li2SO4. (5)
We could synthesize not only well known ABO3 oxides but also functional perovskites such as PbZr0 4sTio 52O3 (PZT), La2/3Cai/3MnO3 as well as superconducting BaPbo75Bio2s03 by this method. We could also synthesize La2CuO4 and its superconducting analogues, La185^oi5Cu04 (A = Sr, Ba), by the same method using Li2CuO2 and LaOCl. For the synthesis of double perovskites A2BB%OQ by this method however, appropriate lithium containing rocksalt precursor oxides are not known in the literature. Therefore, we first synthesized rocksalt precursor oxides of the general formula Li4MWO6 (M = Mg, Mn, Fe, Ni) and established their identity. Using these precursor oxides, we could synthesize the double perovskite oxides Sr2MWO6 (M = Mg, Mn, Fe, Ni) in the metathesis reaction
Li4MWO6 + 2 SrCI2 -» Sr2MWO6 + 4 LiC
Significantly, the double perovskites are formed with an ordered structure at relatively low temperatures (750 - 800 °C) as compared to the high temperatures (up to 1400 °C) usually employed for the synthesis of these materials by conventional ceramic approach.
Next, we investigated ABO$ compositions corresponding to the formula for 6 = Cu and Ni, where we could obtain a YAIO3 superstructure consisting of triangular Cu clusters for 6 = Cu, whereas a perovskite phase for B = Ni. Moreover, the Cu-phase appears to be a unique line phase formed around LasCi^VOg composition, whereas a continuous series of GdFeO3-like perovskite oxides are formed for LaNii»xVxO3 (0 < x < 1/3)forS = Ni.
Considering the current interest in bringing different transition metal ions (d°/dn electronic configuration) in the same perovskite related structure towards developing multiferroic materials, we investigated the substitution of aliovalent cations in a typical Aurivillius phase, Bi2Sr2Nb2TiOi2. We have characterized new aliovalent cation substituted Aurivillius phases, Bi2SrNaNb2TaOi2, Bi2Sr2Nb2Zr012J Bi2Sr2Nb2 5Feo50i2 and Bi2Sr2Nb2 ezZno 33O12.
Lastly, we investigated the interaction of hydrogen with perovskite oxides, /\MnO3 (A = Ca, Sr, Ba) in an attempt to characterize possible existence of hydrogen-inserted oxide materials. An oxide-hydride of the formula LaSrCoO3H07 has recently been reported in the literature. Conventionally, the interaction of hydrogen with perovskite related oxides is known to result in either anion deficient phases (e.g. CaMnO3 -> Ca2Mn205), or hydrogen inserted materials, 'hydrogen bronzes', (e. g. HXWO3, HxBaRuO3), where hydrogen acts as an electron donor (H -^ H+ + e). We have characterized a new mode of hydrogen incorporation in Pt dispersed BaMnO3 and SrMnO3. Detailed investigation of the hydrogen sorption behaviour of 1 atom % Pt dispersed materials showed that about 1.25 mass % of hydrogen is inserted per mole of BaMnO3/Pt, corresponding to an insertion of - 3 hydrogen atoms giving 'BaMnOsHs'. While the exact nature of inserted hydrogen is yet to be established unambiguously, our results suggest that the inserted hydrogen is unlikely to be protonic (H+) in the hydrogen insertion product, BaMnO3H3.
The results of these investigations are presented in the thesis consisting of seven chapters. Chapter 1 gives an overview of perovskite related oxides - structure, properties and synthesis. Chapter 2 presents metathesis as a general route for the synthesis of ABO3 oxides and illustrates the method by transforming several rocksalt oxides such as LiCoO2, Li2Mn03 and Li2Ti03 to corresponding ABO3 oxides, LaCoO3, /\MnO3 and ATiO3 (A = Ca, Sr, Ba). Uniformly in all the cases, the perovskite oxides are obtained in the form of loosely connected submicron sized particles at considerably lower temperatures than those usually employed for their synthesis by ceramic methods. Thermodynamic calculations have also been carried out to probe into the driving force of metathesis reactions involved in the synthesis.
Chapter 3 describes an extension of the metathesis route for the synthesis of double perovskites, Sr2MWO6 (M = Mg, Mn, Fe, Ni). For this purpose, first we synthesized new rocksalt oxides of the general formula, Li4MWO6 (M = Mg, Mn, Fe, Ni). The oxides adopt rocksalt superstructures related to Li4MgReO6 (for M = Mg, Mn, Ni) and U4WO5 (for M = Fe). Metathesis reaction between Li4MWO6 and SrCi2 at 750 - 800 °C yields the corresponding double perovskites where the octahedral site M and W are ordered in the long range. Formation of ordered perovskite oxides at relatively low temperatures (750 - 800 °C) by the metathesis route is a significant result, considering that synthesis of these oxides by conventional ceramic method requires much higher temperatures (1300 - 1400 °C) and prolonged annealing.
Synthesis of La2CuO4, Nd2CuO4 and super conducting La-j 85>4oi5Cu04 (A = Sr, Ba) by the metathesis route is described in Chapter 4.
Chapter 5 deals with synthesis, structure and magnetic properties of mixed-metal oxides of ABO3 composition in the La-6-V-O (6 = Ni, Cu) systems. While the B = Ni oxides adopt GdFeO3-like perovskite structure containing disordered nickel and vanadium at the octahedral B site, La3Cu2VO9 crystallizes in a YAIO3-type structure. A detailed investigation of the superstructure of nominal La3Cu2VO9 by WDS analysis and
Rietveld refinement of powder XRD data reveals that the likely composition of the phase is Lai3Cu9V4O38 5, where the Cu and V atoms are ordered in a Vi3ah (ah = hexagonal a parameter of YAlCMike subcell) superstructure. Magnetic susceptibility data support the proposed superstructure consisting of triangular Cu3 clusters. The present work reveals the contrasting behaviour of La-Cu-V-O and La-Ni-V-0 systems, while a unique line-phase related to YAIO3 structure is formed around La3Cu2VO9 composition in the copper system, a continuous series of perovskite-GdFeO3 solid solutions, LaNi1.0CVxO3 for 0 < x < 1/3 seems to obtain in the nickel system.
The chapter also describes the formation of a new transparent Cu(l) oxide, Lai4V6CuO365, and its characterization. This oxide was obtained during attempts to grow single crystals of LasC^VOg. Single crystal structure determination of Lai4V6CuO36 5 showed that the structure contains isolated VO43" tetrahedra and [OCuO]3" sticks dispersed in a lanthanum oxide network. Films of Lai4V6CuO36 5 were grown on R-plane sapphire by using pulsed laser deposition. Rutherford backscattering spectroscopic and X-ray diffraction analyses of the films showed oriented growth of the title phase, with an optical band gap of -~ 5 eV and n-type conductivity
Chapter 6 presents the work on the flexibility of the Aurivillius structures for substitution of aliovalent/isovalent cations at both A and 6 sites of the perovskite slabs. For example, in a typical n = 3 member, Bi2Sr2Nb2TiOi2, substitution of both Sr and Na at the A site and Ta at the B site has enabled us to synthesize a new n = 3 member, Bi2SrNaNb2Ta0i2, where we see a preference of Nb for the terminal octahedral sheets. Similarly, aliovalent substitution only at the B site of the perovskite slabs of Bi2Sr2Nb2TiOi2 has yielded new members for specific compositions, Bi2Sr2Nb2ZrOi2, Bi2Sr2Nb2 5Feo50i2 and Bi2Sr2Nb2 67Zno33012 that tend to be oxygen-stoichiometric. The latter phases again show a preference of Nb for the terminal octahedral sites that are strongly distorted as compared to the middle octahedral site. This chapter also describes substitution of La3+ for Bi3+ in the perovskite slabs of Bi4Nb30i5 stabilizing a new series of n = 1/ n = 2 intergrowth Aurivillius phases of the formulas, Bi4LnNb3Oi5 (Ln = La, Pr, Nd) and Bi4LaTa30i5. The present work suggests that replacement of Bi3+: 6s2 lone pair ion by non-6s2 cations such as Sr2"* and La3+ in the perovskite slabs of Aurivillius phases tends to render the structure Centro symmetric and the materials lose NLOSHG response.
Chapter 7 describes our investigation of the interaction of hydrogen with alkaline earth manganites (IV) >AMnO3 (>A = Ca, Sr, Ba) dispersed with 1 atom % Pt. The result shows an unprecedented uptake of hydrogen by BaMnO3/Pt to the extent of - 1.25 mass % at moderate temperatures (190 - 260 °C) and ambient pressure. Gravimetric sorption isotherms and mass spectrometric analysis of the desorption products indicate that approximately three hydrogen atoms per mole of BaMnCVPt is inserted reversibly. The nature of hydrogen in the insertion product, BaMnO3H3, is discussed in the light of the structure of BaMnC>3.
The work presented in the thesis is carried out by the candidate as a part of the Ph. D. training programme and most of it has been published in the literature. He hopes that the studies reported here will constitute a worthwhile contribution to the materials chemistry of ABO3 oxides in general.
|
18 |
Synthesis, Structure And Redox Catalytic Properties Of Pt And Pd Ion Substituted Ce1-xMxO2(M= Ti, Zr & Hf) Oxygen Storage Capacity Nano-materialsBaidya, Tinku 11 1900 (has links)
Three-way catalysis (TWC) involves simultaneous removal of the three pollutants (i.e., CO, NOx, and HCs) which led to the branch of auto-exhaust catalysis. CeO2 has become the main component of TWC catalyst because of its oxygen storage storage (OSC) property to supply oxygen under excess fuel condition and store oxygen under lean condition.
Substitution of smaller isovalent cations like Ti4+, Zr4+ and Hf4+ ions in CeO2 forming Ce1-xMxO2 (M = Ti, Zr &Hf) solid solution enhance the OSC property. XRD along with EXAFS study showed that cations arrange in FCC lattice but oxygen coordination around metal ions is split into 4 + 4 coordination in Ce1-xMxO2 instead of ideal 8 coordination in CeO2. The longer Ce/Ti/Zr – O bonds are weakly bound and can be easily removed by H2 giving high OSC value than pure CeO2. Among the three OSC systems studied here, Ce0.5Zr0.5O2 showed exceptionally high OSC which lead to formation of a new a pyrochlore, Ce2Zr2O6.3. This compound is nearly metallic.
Ce0.85-xTi0.15PtxO2- (x = 0.01 & 0.02) crystallizes in fluorite structure and Pt is ionically substituted with 2+ and 4+ oxidation states. H/Pt atomic ratio at 30 oC over Ce0.84Ti0.15Pt0.01O2- is 5 and over Ce0.99Pt0.01O2-δ is 4 against just 0.078 for 8 nm Pt metal particles. Carbon monoxide and hydrocarbon oxidation activity are much higher over Ce1-x-yTixPtyO2 (x= 0.15, y= 0.01, 0.02) compared to Ce1-xPtxO2 (x= 0.01, 0.02). Synergistic involvement of Pt2+/Pt0 and Ti4+/Ti3+ redox couples in addition to Ce4+/Ce3+ due to the overlap of Pt(5d), Ti(3d), and Ce(4f) bands near EF is shown to be responsible for enhanced redox property and higher catalytic activity.
On substitution of Pd ion in Ce1-xTixO2, more lattice oxygen is found to be more labile than Pd in CeO2. The easy removal of oxygen from the more reducible Ti4+ containing support plays a major role in showing higher catalytic activity of this material for CO oxidation, N2O and NO reduction by CO. The catalyst shows 100% N2 selectivity 240 oC in NO+CO reaction. It has been shown that oxide ion vacancy creation created by removal of lattice oxygen by CO is responsible for dissociation of NO or N2O at a lower temperature.
Ionicity of Pd2+ ion in different support could be varied by varying the ionicity of the oxide support itself. Rates of CO oxidation increases or activation energy decreases over Ce1-xPdxO2-δ, Ti1-xPdxO2-δ and Ce1-x-yMxPdyO2-δ (M = Ti, Zr, Hf ; x = 0.25, 0.4 ; y = 0.02) is increased with ionicity of Pd2+ ion.
The substitution of Sn in CeO2 forming Ce1-xSnxO2 (x = 0.1-0.5) solid solution was prepared using tin oxalate precursor by solution combustion method. These oxides can be promising support for noble metals because of the Sn4+ Sn2+ redox couple in addition to Ce3+/Ce4+. The two electron process involved in the redox reaction of Sn as well as easy reducibility of Sn4+ to Sn2+ offers a far better redox catalytic system hitherto not reported. Ce1-xSnxO2 solid solutions as well as Pd ion substituted Ce1-xSnxO2 was prepared for the first time.
|
19 |
Development of Metal Oxide/Composite Nanostructures via Microwave-Assisted Chemical Route and MOCVD : Study of their Electrochemical, Catalytic and Sensing ApplicationsJena, Anirudha 07 1900 (has links) (PDF)
No description available.
|
Page generated in 0.124 seconds