Neste trabalho se realiza a síntese e caracterização de nanofios de óxido de zinco. Adicionalmente se apresenta o processo de montagem de um dispositivo para medidas elétricas deste material. Estuda-se complementarmente o efeito do tratamento de plasma sobre as propriedades de fotoluminescência do material. Nanofios foram sintetizados pelo mecanismo vapor-líquido-sólido (VLS), utilizando ouro como catalizador e safira c-plane como substrato. As amostras foram caracterizadas utilizando microscopia eletrônica de varredura, fotoluminescência a temperatura ambiente, difração de raios X, e microscopia eletrônica de transmissão. Os nanofios obtidos têm seção transversal com formato quase hexagonal, e larguras de aproximadamente 46 nm. O comprimento deles varia de 3 a 10 μm. Os resultados de difração de raios x e microscopia eletrônica de transmissão mostram que eles são monocristalinos com rede cristalina tipo wurtzita, e com direção de crescimento no eixo c. Foram estudados os efeitos da potência de plasma de oxigênio (O2) na fotoluminescência dos nanofios a temperatura ambiente. A diferença na fotoluminescência após diferentes tratamentos de plasma de O2 mostra que a razão entre a emissão da região do band gap e da banda do visível pode ser modificada pelo tratamento. Este efeito corrobora com a hipótese de que a banda verde de luminescência está relacionada às vacâncias de zinco. A variação percentual da razão entre as duas regiões apresenta uma dependência linear com a potência do plasma. / In this work, we performed the synthesis and characterization of zinc oxide nanowires. We also report an assembly process to measure the electrical properties of this material. We study the plasma treatment effect on the photoluminescence spectra of the nanowires. Nanowires were synthesized via vapor-liquid-solid mechanism, using gold as catalyst and c-plane sapphire as substrate. The samples were characterized using scanning electron microscopy, room temperature photoluminescence, x-rays diffraction and transmission electron microscopy. Our nanowires show a quasi-hexagonal cross section, with diameters of approximately 46 nm. Their lengths ranged from 3 to 10 μm. Our results show monocrystalline wurtzite crystal nanowires with c growth direction. We also study the plasma power effect of oxygen (O2) plasma treatment on the room temperature photoluminescence spectra of the nanowires. Our results show that the deep level emission to near band emission ratio decreases with the plasma treatment. This effect supports the hypothesis that claims the green band luminescence is related to the oxygen vacancies. Furthermore, the relative ratio change depends linearly on the plasma power.

Neste trabalho se realiza a síntese e caracterização de nanofios de óxido de zinco. Adicionalmente se apresenta o processo de montagem de um dispositivo para medidas elétricas deste material. Estuda-se complementarmente o efeito do tratamento de plasma sobre as propriedades de fotoluminescência do material. Nanofios foram sintetizados pelo mecanismo vapor-líquido-sólido (VLS), utilizando ouro como catalizador e safira c-plane como substrato. As amostras foram caracterizadas utilizando microscopia eletrônica de varredura, fotoluminescência a temperatura ambiente, difração de raios X, e microscopia eletrônica de transmissão. Os nanofios obtidos têm seção transversal com formato quase hexagonal, e larguras de aproximadamente 46 nm. O comprimento deles varia de 3 a 10 μm. Os resultados de difração de raios x e microscopia eletrônica de transmissão mostram que eles são monocristalinos com rede cristalina tipo wurtzita, e com direção de crescimento no eixo c. Foram estudados os efeitos da potência de plasma de oxigênio (O2) na fotoluminescência dos nanofios a temperatura ambiente. A diferença na fotoluminescência após diferentes tratamentos de plasma de O2 mostra que a razão entre a emissão da região do band gap e da banda do visível pode ser modificada pelo tratamento. Este efeito corrobora com a hipótese de que a banda verde de luminescência está relacionada às vacâncias de zinco. A variação percentual da razão entre as duas regiões apresenta uma dependência linear com a potência do plasma. / In this work, we performed the synthesis and characterization of zinc oxide nanowires. We also report an assembly process to measure the electrical properties of this material. We study the plasma treatment effect on the photoluminescence spectra of the nanowires. Nanowires were synthesized via vapor-liquid-solid mechanism, using gold as catalyst and c-plane sapphire as substrate. The samples were characterized using scanning electron microscopy, room temperature photoluminescence, x-rays diffraction and transmission electron microscopy. Our nanowires show a quasi-hexagonal cross section, with diameters of approximately 46 nm. Their lengths ranged from 3 to 10 μm. Our results show monocrystalline wurtzite crystal nanowires with c growth direction. We also study the plasma power effect of oxygen (O2) plasma treatment on the room temperature photoluminescence spectra of the nanowires. Our results show that the deep level emission to near band emission ratio decreases with the plasma treatment. This effect supports the hypothesis that claims the green band luminescence is related to the oxygen vacancies. Furthermore, the relative ratio change depends linearly on the plasma power.

Neste trabalho se realiza a síntese e caracterização de nanofios de óxido de zinco. Adicionalmente se apresenta o processo de montagem de um dispositivo para medidas elétricas deste material. Estuda-se complementarmente o efeito do tratamento de plasma sobre as propriedades de fotoluminescência do material. Nanofios foram sintetizados pelo mecanismo vapor-líquido-sólido (VLS), utilizando ouro como catalizador e safira c-plane como substrato. As amostras foram caracterizadas utilizando microscopia eletrônica de varredura, fotoluminescência a temperatura ambiente, difração de raios X, e microscopia eletrônica de transmissão. Os nanofios obtidos têm seção transversal com formato quase hexagonal, e larguras de aproximadamente 46 nm. O comprimento deles varia de 3 a 10 μm. Os resultados de difração de raios x e microscopia eletrônica de transmissão mostram que eles são monocristalinos com rede cristalina tipo wurtzita, e com direção de crescimento no eixo c. Foram estudados os efeitos da potência de plasma de oxigênio (O2) na fotoluminescência dos nanofios a temperatura ambiente. A diferença na fotoluminescência após diferentes tratamentos de plasma de O2 mostra que a razão entre a emissão da região do band gap e da banda do visível pode ser modificada pelo tratamento. Este efeito corrobora com a hipótese de que a banda verde de luminescência está relacionada às vacâncias de zinco. A variação percentual da razão entre as duas regiões apresenta uma dependência linear com a potência do plasma. / In this work, we performed the synthesis and characterization of zinc oxide nanowires. We also report an assembly process to measure the electrical properties of this material. We study the plasma treatment effect on the photoluminescence spectra of the nanowires. Nanowires were synthesized via vapor-liquid-solid mechanism, using gold as catalyst and c-plane sapphire as substrate. The samples were characterized using scanning electron microscopy, room temperature photoluminescence, x-rays diffraction and transmission electron microscopy. Our nanowires show a quasi-hexagonal cross section, with diameters of approximately 46 nm. Their lengths ranged from 3 to 10 μm. Our results show monocrystalline wurtzite crystal nanowires with c growth direction. We also study the plasma power effect of oxygen (O2) plasma treatment on the room temperature photoluminescence spectra of the nanowires. Our results show that the deep level emission to near band emission ratio decreases with the plasma treatment. This effect supports the hypothesis that claims the green band luminescence is related to the oxygen vacancies. Furthermore, the relative ratio change depends linearly on the plasma power.

京都大学 / 0048 / 新制・課程博士 / 博士(医学) / 甲第22367号 / 医博第4608号 / 新制||医||1043(附属図書館) / 京都大学大学院医学研究科医学専攻 / (主査)教授 戸口田 淳也, 教授 妻木 範行, 教授 安達 泰治 / 学位規則第4条第1項該当 / Doctor of Medical Science / Kyoto University / DFAM

The main objective of nanotechnology is to build self-powered nanosystems that are ultrasmall in size, exhibit super sensitivity, extraordinary multi functionality, and extremely low power consumption. As we all know that 21st century has brought two most important challenges for us. One is energy shortage and the other is global warming. Now to overcome these challenges, it is highly desirable to develop nanotechnology that harvests energy from the environment to fabricate self-power and low-carbon nanodevices. Therefore a self-power nanosystem that harvests its operating energy from the environment is an attractive proposition. This is also feasible for nanodevices owing to their extremely low power consumption. One advantageous approach towards harvesting energy from the environment is the utilization of semiconducting piezoelectric materials, which facilitate the conversion of mechanical energy into electrical energy. Among many piezoelectric materials ZnO has the rare attribute of possessing both piezoelectric and semiconducting properties. But most applications of ZnO utilize either the semiconducting or piezoelectric property, and now it’s time to fully employ the coupled semiconducting-piezoelectric properties to form  the basis for electromechanically coupled nanodevices. Since wurtzite zinc oxide (ZnO) is structurally noncentral symmetric and has the highest piezoelectric tensor among tetrahedrally bonded semiconductors, therefore it becomes a promising candidate for energy harvesting applications. ZnO is relatively biosafe and biocompatible as well, so it can be used at large scale without any harm to the living environment. The synthesis of another transition metal oxide known as Co3O4 is also important due to its potential usage in the material science, physics and chemistry fields. Co3O4 has been studied extensively due to low cost, low toxicity, the most naturally abundant, high surface area, good redox, easily tunable surface and structural properties. These significant properties enable Co3O4 fruitful for developing variety of nanodevices. Co3O4 nanostructures have been focused considerably in the past decade due to their high electro-chemical performance, which is essential for developing highly sensitive sensor devices. I started my work with the synthesis of ZnO nanostructures with a focus to improve the amount of harvested energy by utilizing oxygen plasma treatment. Then I grow ZnO nanorods on different flexible substrates, in order to observe the effect of substrate on the amount of harvested energy. After that I worked on understanding the mechanism and causes of variation in the resulting output potential generated from ZnO nanorods. My next target belongs to an innovative approach in which AFM tip decorated with ZnO nanorods was utilized to improve the output energy. Then I investigated Co3O4 nanostructures though the effect of anions and utilized one of the nanostructure to develop a fast and reliable pH sensor. Finally to take the advantage of higher degree of redox chemistry of NiCo0O4 compared to the single phase of nickel oxide and cobalt oxide, a sensitive glucose sensor is developed by immobilizing glucose oxidase. However, there were problems with the mechanical robustness, lifetime, output stability and environmental adaptability of such devices, therefore more work is going on to find out new ways and means in order to improve the performance of fabricated nanogenerators and sensors.

This doctoral thesis concerns the preparation of porous cerium oxide/carbon bilayers on silicon substrates. In this regard, carbonaceous films in the form of amorphous carbon (a-C) and nitrogenated amorphous carbon (CNx) are considered. The influence of various process parameters of the cerium oxide deposition on the morphology of the final cerium oxide/carbon bilayer is investigated. A correlation could be found between the morphol- ogy of the bilayer and the stoichiometry of the cerium oxide film determined by means of XPS. Furthermore, a study regarding the chemical composition of the used carbonaceous films by means of various spectroscopic techniques is presented. It was found that the chemical composition of the carbonaceous films strongly depends on the deposition con- ditions of these films and influences the behaviour of these films during oxygen plasma treatment and cerium oxide deposition, respectively. 1