Dealing with the electromagnetic issue might bring a sort of discontinuous and nondifferentiable regions. Thus, it is of great interest to implement an appropriate optimisation approach, which can preserve the computational resources and come up with a global optimum. While not being trapped in local optima, as well as the feasibility to overcome some other matters such as nonlinear and phenomena of discontinuous with a large number of variables. Problems such as lengthy computation time, constraints put forward for antenna requirements and demand for large computer memory, are very common in the analysis due to the increased interests in tackling high-scale, more complex and higher-dimensional problems. On the other side, demands for even more accurate results always expand constantly. In the context of this statement, it is very important to find out how the recently developed optimization roles can contribute to the solution of the aforementioned problems. Thereafter, the key goals of this work are to model, study and design low profile antennas for wireless and mobile communications applications using optimization process over a computational electromagnetics numerical solution. The numerical solution method could be performed over one or hybrid methods subjective to the design antenna requirements and its environment. Firstly, the thesis presents the design and modelling concept of small uni-planer Ultra- Wideband antenna. The fitness functions and the geometrical antenna elements required for such design are considered. Two antennas are designed, implemented and measured. The computed and measured outcomes are found in reasonable agreement. Secondly, the work is also addressed on how the resonance modes of microstrip patches could be performed using the method of Moments. Results have been shown on how the modes could be adjusted using MoM. Finally, the design implications of balanced structure for mobile handsets covering LTE standards 698-748 MHz and 2500-2690 MHz are explored through using firefly algorithm method. The optimised balanced antenna exhibits reasonable matching performance including near-omnidirectional radiations over the dual desirable operating bands with reduced EMF, which leads to a great immunity improvement towards the hand-held. / General Secretariat of Education and Scientific Research Libya

Cellular beams became increasingly popular as an efficient structural form in steel construction since their introduction. Their sophisticated design and profiling process provides greater flexibility in beam proportioning for strength, depth, size and location of circular holes. The purpose of manufacturing these beams is to increase overall beam depth, the moment of inertia and section modulus, which results in greater strength and rigidity. Cellular beams are used as primary or secondary floor beams in order to achieve long spans and service integration. They are also used as roof beams beyond the range of portal-frame construction, and are the perfect solution for curved roof applications, combining weight savings with a low-cost manufacturing process. The purpose of the current research is to study optimum design, ultimate load capacity under applied load and finite element analysis of non-composite cellular beams. The first part of the research program focuses on the optimum design of steel cellular beams using one of the stochastic search methods called &ldquo / harmony search algorithm&rdquo / . The minimum weight is taken as the design objective while the design constraints are implemented from the Steel Construction Institute. Design constraints include the displacement limitations, overall beam flexural capacity, beam shear capacity, overall beam buckling strength, web post flexure and buckling, vierendeel bending of upper and lower tees and local buckling of compression flange. The design methods adopted in this publication are consistent with BS5950. In the second part of the research, which is the experimental work, twelve non-composite cellular beams are tested to determine the ultimate load carrying capacities of these beams under using a hydraulic plug to apply point load. The tested cellular beam specimens have been designed by using harmony search algorithm. Finally, finite element analysis program is used to perform elastic buckling analysis and predict critical loads of all steel cellular beams. Finite element analysis results are then compared with experimental test results for each tested cellular beam.

Cílem této práce je se seznámení s možnostmi programu Matlab z hlediska detailní analýzy deterministických dynamických systémů. Jedná se především o analýzu časové posloupnosti a o nalezení Lyapunových exponentů. Dalším cílem je navrhnout algoritmus umožňující specifikovat chování systému na základě znalosti příslušných diferenciálních rovnic. To znamená, nalezení chaotických systémů.