Spelling suggestions: "subject:"fhysics off then magnetism"" "subject:"fhysics off them magnetism""
61 |
Calculation of transmission line parameters for multiconductor lines in a multi-dielectric mediumMcFarland, Robert Bynum, 1964- January 1992 (has links)
A method for computing the per-unit-length capacitance matrix and the inductance matrix for multiconductor transmission lines in a multi-dielectric medium is presented. The multi-dielectric medium consists of both planar and non-planar dielectric regions. The formulation is based on an integral equation method for the free charge distribution on conductor surfaces and the polarization charge distribution on the non-planar dielectric interfaces. The kernel of the integral equation is a space domain Green's function for a layered medium. The numerical solution is obtained by the method of moments.
|
62 |
Bit error rate computations for both noise and intersymbol interference considerations in optical communicationsVrahas, Antonios Costa, 1967- January 1993 (has links)
Bit error rate computation for optical communication systems incorporating equalizers and under both noise and intersymbol interference (ISI) is discussed. An accurate method based on a saddlepoint approximation is used for the computation. Previous work based on saddlepoint approximation has considered only the use of basic integration-and-dump detection. When ISI is strong, this simple detection method is unsatisfactory. Instead, a raised-cosine filtering is often used to achieve minimal ISI. This thesis considers both integration-and-dump and raised-cosine equalizers. The use of equalizers other than integration-and-dump complicates the computation because of the complexity of the moment generating function involved. Two different input pulses are considered to study the effect of ISI. Results show that when intersymbol interference is strong, the use of raised-cosine equalizers can reduce intersymbol interference and improve the performance of the system significantly.
|
63 |
Terahertz local oscillator via difference frequency generation in iii-v semiconductors using frequency stabilized lasersHerman, Greg S. 28 December 2013 (has links)
<p> Terahertz (THz) heterodyne receiver systems are required by NASA to monitor gas concentrations related to the Earth's ozone depletion. To this end, NASA needs compact, solid state, tunable THz local oscillators. THz LOs have been developed using three means: 1) All-electronic LOs using mixers in combination with Gunn oscillators, 2) Hybrid Photo-electronic LOs using a cw analog of the Auston switch, and 3) All-photonic THz LOs using coherent sources, such as vapor lasers or solid-state Quantum Cascade Lasers, and down converting lasers using nonlinear crystals. In this dissertation, we began with two frequency stabilized Nd:YAG lasers, locked to a common reference cavity, as a starting point to having a stable input into a nonlinear optical frequency conversion system. Following this, we explored the nonlinear crystals useful for THz generation, and the phasematching schemes that could be employed by each. We concluded by settling on highly insulating III-V semiconductor crystals as the proper choice of nonlinear element, and put together a new phasematching method that is most useful for them.</p>
|
64 |
Ultrasound-induced thermal therapy of hyperplasia in ringed expanded polytetrafluoroethylene (eptfe) access graftsQuery, Michael Earl 06 May 2014 (has links)
<p> Hemodialysis vascular access, the interface between a dialysis patient and a dialysis machine, is quite literally the lifeblood of a patient's health. Vascular access dysfunction is the leading cause of hospitalization in hemodialysis patients. The occlusive growth of neointimal hyperplasia (NH) in expanded polytetrafluoroethylene (ePTFE) ringed grafts is the primary cause of failure. To further develop a proposed thermal ultrasound treatment to reduce or prevent NH in arteriovenous vascular grafts, the acoustic properties of ePTFE were studied in water and alcohol solutions. Previous reports of ePTFE acoustic properties are critiqued. It was found that the acoustic transmission and attenuation through ePTFE, and therefore the potential for an ultrasound-based therapy for NH, are heavily dependent on the medium in which the graft is immersed, suggesting that the acoustic properties of implanted grafts will change as grafts mature in vivo. The acoustic impedance and attenuation of water-soaked ePTFE were 0.478 ± 1.43 × 10<sup>-2</sup> MRayl and 1.78 ± 0.111 Np/cm*MHz, respectively, while the acoustic impedance and attenuation of ePTFE in alcohol were 1.49 ± 0.149 MRayl and 0.77 ± 1.1 × 10<sup>-2</sup> Np/cm*MHz, respectively. The use of focused ultrasound to heat implanted ringed ePTFE grafts was numerically modeled from 1.35- and 1.443-MHz transducers for in vitro geometries. Power deposition and heating, in turn, differed by an order of magnitude between various graft acoustic properties. Graft rings were predicted to be substantial absorbing and scattering features. In vitro phantom models were constructed: one with and one without thermocouples. At 1 W of acoustic power, the maximum temperature rise was 8˚ C. The thermocouple model containing a water-soaked graft did not experience heating in the far graft wall. The MRTI model confirmed that the graft rings are an absorbing/scattering feature. Heating was not prevented in the presence of water flow through the graft. Water was not heated significantly. Overall, results suggest ultrasound exposure can be used to generate temperature rises corresponding with the potential prevention or inhibition of NH in ringed ePTFE vascular grafts. A hybrid therapeutic/diagnostic transducer design with a therapeutic semi-annular array surrounding a diagnostic linear array is presented. Compared to a solid transducer of the same dimensions, there were only marginal aberrations in the focal plane. Numerical optimization of the element drive configuration indicated that the least distorted focal plane was produced by uniform phase and magnitude at each element.</p>
|
65 |
Electromagnetic fields generated by ocean currents and the potential for using geomagnetic data in ocean and climate studiesTyler, Robert H. January 1995 (has links)
No description available.
|
66 |
Studies of compounds related to Cu(In-xGax)Se solar cellsWang, Haiping, 1969- January 2001 (has links)
No description available.
|
67 |
Advances in Complex Electromagnetic MediaKundtz, Nathan January 2009 (has links)
<p>Complex artificial materials (metamaterials) strongly interact with light and can be used to fabricate structures which mimic a material response that has no natural equivalent. Classical tools for the design of optical or radio frequency devices are often ill-suited to utilize such media or have shortcomings in their ability to capture important physics in the device behavior. Recently it has been demonstrated that the structure of Maxwell's equations can be used to exploit this newly available freedom. By leveraging the `form-invariance' of Maxwell's equations under coordinate transforms, it is possible to develop material distributions in which light will behave as though flowing through warped coordinates. This design process is termed `transformation optics' and has inspired the creation of many novel electromagnetic structures such as the invisibility cloak.</p><p>In this dissertation the tools used in the field of transformation optics will be explored and expanded. Several new designs are discussed, each of which expands upon the ideas that have previously been employed in the field. To begin, I show that the explicit use of a transformation which extends throughout all space may be used to reduce the overall size of an optical device without changing its optical properties. A lens is chosen as a canonical device to demonstrate this behavior. For this work I provided the original idea for a compressing transformation as well as its dielectric-only implementation. I then mentored Dan Roberts as he confirmed the device properties through simulation. I further demonstrate that currents may be succesfully employed within the framework of transformation optics-resulting in novel antenna designs. For this work I suggested handling the sheet currents as the limit of a volumetric current density. I also demonstrated how an intermediate coordinate system could be used to easily handle the types of transformatios which were being explored.</p><p>For a particular functionality the choice of transformation is, in general, not unique. It is natural, then, to seek optimized transformations which reduce the complexity of the final structure. It was recently demonstrated that for some transformations a numerical scheme could be employed to find quasi-conformal transformations for which the requisite complex material distribution could be well approximated by an isotropic, inhomogeneous media. This process was previously used to demonstrate a carpet cloak-a device which masks a bump in a mirror surface. Unlike the more common transformation optical media, which exhibit strong losses at high frequencies, isotropic designs can be readily made to function at infrared or even optical frequencies.</p><p>The prospect of leveraging transformation optics in devices which operate at high frequencies, into the infrared and visible, motivates the use of quasi-conformal transformations in lens design. I demonstrate how transformation optics can be used to take a classical lens design based on spherical symmetry, such as a Luneburg lens, and warp it to suit the requirements of a planar imaging array. I report on the experimental demonstration of this lens at microwave frequencies. In the final design a lens is demonstrated in a two-dimensional field mapping waveguide to have a field of view of ~140 degrees and a bandwidth exceeding a full decade. In this work I proposed the idea of using the inverse of the quasi-conformal transform to arrive at the lens index profile. I performed all necessary simulations and wrote ray tracing code to confirm the properties of the lens. I proposed the metamaterial realization of the lens and performed the necessary retrievals for material design. I wrote code which would create the layout for an arbitrary gradient index structure in a standard computer aided drafting format. I fabricated three lenses-two of which are described in this thesis-and took all of the data shown in the thesis.</p><p>The most well known example of a transformation optical device is the invisibility cloak. Despite the great deal of attention paid to the cloak in the literature, the most natural way in which to quantify the efficacy of the cloak-its cross-section-has never been experimentally determined. This measurement is of practical interest because the cloak provides a useful canonical example of a medium which relies on the unique properties of metamaterials-strong anisotropy, inhomogeneity and both magnetic and electric response. Thus, a cloaking cross-section measurement provides a useful way to quantify advancements in the effective medium theories which form the basis for metamaterials. I report on the first such measurements, performed on the original microwave cloaking design. The experiments were carried out in a two-dimensional TE waveguide. Explicit field maps are used to determine the Bessel decomposition of the scattered wave. It is found that the cloak indeed reduces the scattering cross-section of a concealed metal cylinder in a frequency band from 9.91 to 10.14 GHz. The maximum cross-section reduction was determined to be 24%. The total cross-section and the Bessel decomposition of the scattered wave are compared to an analytical model for the cloaking design which assumes a discrete number of loss-less, homogenized cylinders. While the qualitative features of the cloak-a reduced cross-section at the cloaking frequency-are realized, there is significant deviation from the homogenized calculation. These deviations are associated with loss and inaccuracies of the effective-medium-model for metamaterials. In this work I proposed of direct integration of the fields to perform cross-section measurements. I worked out the necessary formulas to determine the coefficients in the Bessel expansion and the resulting scattering cross-section. I mentored an undergraduate student, Dan Gaultney, who scripted the application of the cross-section analysis and took the necessary data. All of the data in this thesis, however, is based on my own implementation of the data analysis.</p> / Dissertation
|
68 |
Particle contamination in sulfur-hexafluoride/argon plasma etching processKong, Yung, 1967- January 1991 (has links)
Process generated particle contamination on unpatterned silicon wafers etched in an SF6/argon plasma using a Tegal MCR-1 etcher in the plasma triode-1 mode was characterized using response surface methodology. Particle deposition was observed to be a predictable function of plasma parameter space, which can be determined by relatively few statistically designed experiments. A model of particle deposition as a function of 13.56 MHz chamber electrode rf power, chamber pressure, gas flow rate, etch time and 100 kHz wafer electrode power was constructed. It is found that particle deposition depends linearly on etch time and both 13.56 MHz and 100 kHz power. In addition, particle deposition increased with gas flow rate at low flow rate, reaches a maximum, then decreased as flow rate increased further. Moreover, there was no observable effect on particle deposition due to pressure variation in the pressure range explored. Auger chemical analysis showed that the particles contained elemental sulfur, fluorine, silicon, aluminum, carbon and oxygen. Most particles were typically less than 2 μm in diameter.
|
69 |
Fundamental investigations of double-negative (DNG) metamaterials including applications for antenna systemsKipple, Allison Denise January 2004 (has links)
The postulated characteristics of double-negative (DNG) materials--i.e., materials with simultaneously negative permittivity and negative permeability (ε < 0, μ < 0)--and recent attempts to realize those characteristics with synthetic metamaterials are briefly reviewed. Investigations into the causality of signal propagation in a DNG medium are then presented. Previous research in this topic is examined, and it is verified that a DNG medium must be dispersive in order to be causal. An accurate time-domain description of propagation in a DNG medium is shown to be elusive due to the presence of dispersion, though approximate solutions and recommendations for future analytical research are provided. The results of numerical investigations into this topic are then discussed, and the anticipated combination of causal signal transmission and a negative phase shift are observed in the numerical data. Potential applications of DNG metamaterials to antenna systems are then presented. A DNG shell is observed to reduce the intrinsic reactance sensed by an infinitesimal electric dipole, thereby increasing the dipole's radiated power. Analytical expressions for the fields in the dipole--DNG shell system are derived, and numerical results for a variety of DNG shell configurations are discussed. The presence of a DNG shell is shown to increase the dipole's radiated power by orders of magnitude in some cases. A circuit model of the dipole--DNG shell system is additionally presented and used to interpret the system's physical behavior. The scattering properties of nested metamaterial shells are then analyzed. Various layering combinations of DNG, double-positive (DPS) and single-negative (SNG) shells are observed to produce resonant scattering of an incident, fundamental radial transverse-magnetic (TMᵣ) wave. Reciprocity between the metamaterial configurations that exhibit TMᵣ scattering resonances and those shown to maximize the power radiated by the infinitesimal electric dipole is demonstrated. Several additional metamaterial configurations are shown to produce both resonant TMᵣ scattering and resonant dipole radiation. A resonant configuration with one epsilon-negative (ENG) shell is especially appealing due to its manufacturability. The effects of a DNG layer on the creeping waves scattered by a small metal sphere are also discussed as a minor yet curious offshoot to the scattering analyses.
|
70 |
Development and application of an efficient method for the solution of stochastic activity networks with deterministic activitiesMalhis, Luai Mohammed, 1964- January 1996 (has links)
Modeling and evaluation of communication and computing systems is an important undertaking. In many cases, large-scale systems are designed in an ad-hoc manner, with validation (or disappointment regarding) system performance coming only after an implementation is made. This does not need to be the case. Modern modeling tools and techniques can yield accurate performance predictions that can be used in the design process. Stochastic activity networks (SANs), stochastic Petri nets (SPNs) and analytic solution methods permit specification and fast solution of many complex system models. To enhance the modeling power of SANs (SPNs), new steady-state analysis methods have been proposed for SAN (SPN) models that include non-exponential activities (transitions). The underlying stochastic process is a Markov regenerative process (MRP) when at most one non-exponential activity (transition) is enabled in each marking. Time-efficient algorithms for constructing the Markov regenerative process have been developed. However, the space required to solve such models is often extremely large. This largeness is due to the large number of transitions in the MRP. Traditional analysis methods require all these transitions be stored in memory for efficient computation. If the size of available memory is smaller than that needed to store these transitions, a time-efficient computation is impossible using these methods. To use this class of SANs to model real systems, the space complexity of MRP analysis algorithms must be reduced. In this thesis, we propose a new steady-state analysis method that is time and space efficient. The new method takes advantage of the structure of the underlying process to reduce both computation time and required memory. The performance of the proposed method is compared to existing methods using several SAN examples. In addition, the ability to model real systems using SANs that include exponential and deterministic activities is demonstrated by modeling and evaluating the performability of a group communication protocol, called Psync. In particular, we study message stabilization time (the time required for messages to arrive at all hosts) under a wide variety of workload and message loss probabilities. We then use this information to suggest a modification to Psync to reduce message stabilizing time. Another important issue we consider is the dependability modeling and evaluation of fault-tolerant parallel and distributed systems. Because of the inherent component redundancy in such systems, the state space size of the underlying stochastic process is often very large. Reduced base model construction techniques that take advantage of symmetries in the structure of such systems have the potential to avoid this state space growth. We investigate this claim, by considering the application of SANs together with reduced base model construction for the dependability modeling and evaluation of three different systems: a fault-tolerant parallel computing system, a distributed database architecture, and a multiprocessor shared-memory system.
|
Page generated in 0.0932 seconds