Spelling suggestions: "subject:"bioconjugated polymers"" "subject:"biconjugated polymers""
1 |
Design and syntheses of hole and electron transport donor-acceptor polymeric semiconductors and their applications to organic field-effect transistorsFu, Boyi 27 May 2016 (has links)
The π-conjugated organic and polymeric semiconducting materials have attracted much attention in the past years due to their significant potential in applications to electronic and optoelectronic devices including organic field-effect transistors (OFETs), organic photovoltaics (OPVs), and organic light-emitting diodes (OLEDs), etc. Yet, organic and polymeric semiconductors still have challenges associated with their relatively low charge carrier (hole and electron) transport mobilities and ambient stability in OFET applications.
This dissertation discusses the molecular engineering on backbones and side-chains of π-conjugated semiconducting polymers to enhance the hole and electron field-effect mobilities. Three donor-acceptor copolymers, the hole transport (p-type) poly(hexathiophene-co-benzo- thiazole) (PBT6), the hole transport poly(thiophenes-benzothiadiazole-thiophenes-diketopyrrolo- pyrrole) (pTBTD), and the electron transport (n-type) poly(dithieno-diketopyrrolopyrrole-bithiazole) (PDBTz) have been developed. Besides, the effect of polymer side chains on polymer solution-processability and charge carrier transport properties was systematically investigated: a side chain 5-decylheptadecyl having the branching position remote from the polymer backbone merges the advantages of the improved solubility from traditional branched side chains in which the branch chains are close to polymer backbone and the effective π-π intermolecular interactions commonly associated with linear side chains. This indicates the potential of side chain engineering to facilitate the charge carrier transport performance of organic and polymeric semiconductors. Additionally, PDBTz solution-processing to OFETs based on non-halogenated solvents (xylenes and tetralin) was studied. The resultant thin-film OFET devices based on non-halogenated solvents exhibited similar film morphology and field-effect electron mobilities as the counterparts based on halogenated solvents, indicative of the feasibility of developing high mobility OFET devices through more environmentally-benign processing.
|
2 |
Conducting metallopolymers with tridentate ligands and coordination chemistry with corresponding model compoundsKeskin, Şeyma 22 July 2014 (has links)
Conducting polymers that contain metals are remarkable materials, because they have the properties of both organic backbones and metals. Depending on the position of the metal relative to the conjugated backbone, i.e. attached to or directly in the backbone, these two can couple resulting in advancement of the functionality and therefore potential applications of these types of materials. Complexes of tridentate ligands with donor atoms such as phosphorus, nitrogen, and sulfur also have a wide variety of applications. In addition, complexes of tridentate ligands have advantages of stability and control of electron density by variation of donor atoms. Therefore, conjugated polymers with tridentate ligand units will have promise for various applications and advantages in their designs. Complexes of PNP ligand with molybdenum and carbonyl ancillary ligands were synthesized and characterized. Isomerization and conversion reactions between them were investigated as well as the coordination modes. Many types of PNP ligands have been studied in the literature because the hemilabile property of the nitrogen atom promotes some catalytic reactions and gives different coordination geometries. Conducting polymers can be used as redox-active ligands and they can be used to control electron density on the metal attached to them. Synthesis and characterization of a novel polymerizable ligand 3,5-bis-EDOT-N,N-bis[2-diphenylphosphinoethyl]aniline was achieved. Related molybdenum complexes with ancillary ligands as carbonyls were also synthesized and characterized. Monomer complexes and the free ligand were electropolymerized and studied. Tris(bipyridine)ruthenium(II) chloride and analogous complexes have been studied extensively in the literature due to their luminescent and photochemical properties, and excited state lifetimes. Conducting polymers with similar ruthenium groups have been investigated for various applications. Synthesis of four ruthenium complexes with the polymerizable ligand 2,6-Bis[4-[2-(3,4-diethylenedioxy)thiophene]pyrazol-1-yl]pyridine and four different bidentate ligands were reproduced; electropolymerizations of the complexes were achieved; electrochemical, UV-Vis and luminescence studies were performed and discussed. Various complexes of copper, silver, platinum, and palladium with nitrogen and phosphorus donors have been reported for their luminescence behavior as well as their interesting structures. Model complexes of these metals with N,N-bis[2-(diphenylphosphino)ethyl]phenyl-amine (a PNP ligand) have been synthesized and characterized. Absorption and luminescence behaviors as well as the coordination modes were investigated. / text
|
3 |
Fotogenerace nosičů náboje v substituovaných polyacetylenech / Photogeneration of charge carriers in substituted polyacetylenesJex, Michal January 2013 (has links)
We present an improved model of charge carrier photogeneration in π-conju- gated polymers with weak intermolecular interactions based on the model of Arkhipov. It includes quantum effects affecting the creation of charge transfer states, which occurs as an intermediate step in the free charge carrier photo- generation process. The electrostatic potential between the electron and the hole and transfer integrals needed for the calculation of the potential barrier for the charge transfer state dissociation are calculated quantum-chemically. We apply our model on experimental data of the charge carrier photogenera- tion efficiency in poly[1-trimethylsilylphenyl,2-phenyl]acetylene to explain its dependence on applied electric field. We eliminate several problems of the previous model. We are able to fit experimental data with just one set of parameters in the whole interval of the applied electric field. We do not have to consider several intervals of the electric field separately as in the previous work and reduce the number of needed parameters to three. Key words π-conjugated polymers, charge carrier photogeneration, photoconductivity 1
|
4 |
Magneto-Optic Polymers and DevicesLopez Santiago, Alejandra January 2014 (has links)
For several decades, the field of magneto-optics (MO) has demonstrated applications that have impact on every day applications such as in optical data storage, magnetic field sensing, crucial for magnetoencephalography and magnetocardiography; and compact and efficient optical isolators, among others. In the past, many of these applications and the devices designed for them have heavily relied on inorganic materials. Organic materials with a high MO response represent an interesting alternative to the inorganic equivalent by not only being a more cost efficient solution, but also by allowing the user to modify a number of variables to control and optimize the MO performance depending on the application and level of performance desired. In this dissertation I discuss the MO properties of novel organic materials, starting with polythiophene, which has been of interest due to the strong relationship between its high MO performance and its lamellar structure and regioregularity. I will also be discussing another material system that provides several degrees of MO tunability: magnetite based nanocomposites. A unique and novel synthetic approach described in this dissertation yields both highly transparent and MO responsive polymer films. I will be describing a systematic approach that indicates a strong influence of the size of the nanoparticle as well as the nanoparticle concentration in the MO performance of the bulk polymer, while maintaining high optical quality with minimal scattering and absorption in the visible and near infrared. Finally, I will be discussing the implementation of both a magnetite nanocomposite and a cobalt ferrite based nanocomposite in a free space magnetic field system and demonstrate the proof-of-principle operation of a sensing system.
|
5 |
Films minces nanostructurés de domaines sub-10 nm à partir de copolymères biosourcés pour des applications dans le photovoltaïque organique / Sub-10 nm nano-structured carbohydrate-based block copolymer thin films for organic photovoltaic applicationsOtsuka, Yoko 04 January 2017 (has links)
La structuration nanométrique par l'auto-assemblage des copolymères à blocs est l'une des stratégies « bottom-up » prometteuses pour contrôler la morphologie de la couche active de cellules photovoltaïques organiques. Dans cette thèse, une nouvelle classe de copolymère constitué d’un bloc semi-conducteur π-conjugué poly(3-hexylthiophène) (P3HT) regioregulier et d’un bloc oligosaccharidique a été synthétisée et a montré une auto-organisation en nanostructures périodiques de domaine inférieure à 10 nm. Deux systèmes de copolymères à blocs ont été synthétisés, le P3HT-bloc-maltoheptaose peracétylé (P3HT-b-AcMal7) et le P3HT-bloc-maltoheptaose (P3HT-b-Mal7), via une réaction de chimie "clic" entre les segments oligosaccharidiques et P3HT fonctionnalisés en extrémité. Une étude exhaustive sur leur comportement d'auto-assemblage par des analyses AFM, TEM et de diffusion des rayons X a révélé que le copolymère à bloc P3HT-b-AcMal7 montre une propension à s'auto-assembler par recuit thermique en structures lamellaires avec une résolution inférieure à 10 nm, c’est-à-dire la morphologie et la taille idéale pour la couche active d’une cellule photovoltaïque organique. De plus, ce système présente l’une des plus petites tailles de domaines réalisées par l'auto-assemblage de copolymères à blocs à base de P3HT. Un réseau lamellaire composé uniquement du P3HT a été obtenu par gravure chimique sélective du bloc sacrificiel AcMal7 à partir d'un film nano-organisé de P3HT-b-AcMal7 et ceci sans affecter la structure lamellaire initiale. Les domaines vides du AcMal7 gravé pourront être remplis par un composé accepteur d'électrons tel que le [6,6]-phényl-C61-butanoate de méthyle (PCBM) pour l’application photovoltaïque comme perspective de cette thèse. Les résultats et les connaissances acquises dans cette étude devraient permettre d'augmenter les performances des prochaines générations de cellules photovoltaïques organiques. / Nanoscale patterning through self-assembly of block copolymers is one of the promising bottom-up strategies for controlling active layer morphology in organic photovoltaics. In this thesis, a new class of carbohydrate-based semiconducting block copolymers consisting of π-conjugated regioregular poly(3-hexylthiophene) (P3HT) and oligosaccharides were synthesized and self-organized into sub-10 nm scale periodic nanostructures. Two different diblock copolymers, i.e. P3HT-block-peracetylated maltoheptaose (P3HT-b-AcMal7) and P3HT-block-maltoheptaose (P3HT-b-Mal7) were synthesized via "click" reaction between end-functionalized oligosaccharide and P3HT moieties. A comprehensive investigation of their self-assembly behavior by AFM, TEM, and X-ray scattering analyses revealed that the P3HT-b-AcMal7 diblock copolymer has the ability to self-assemble into sub-10 nm scale lamellar structure, which is the ideal morphology of the active layer in organic photovoltaics and one of the smallest domain sizes achieved by self-assembly of P3HT-based block copolymers, via thermal annealing. Nano-patterned film made of P3HT was attained by selective chemical etching of AcMal7 block from microphase-separated P3HT-b-AcMal7 template without affecting the original lamellar structure. The resultant void where the etched-out AcMal7 block existed will be filled with electron acceptor compounds such as [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) for photovoltaic application as a perspective of this thesis. The results and knowledge obtained in this study are expected to provide further advances and innovation in organic photovoltaics.
|
Page generated in 0.0481 seconds