Thesis (MSc (Forest and Wood Science))--University of Stellenbosch, 2011. / ENGLISH ABSTRACT: This study investigated the use of carbon isotopes as a potential measure for water availability and drought stress in Pinus radiata in the Western and Southern Cape, South Africa. An understanding of water availability and its variation in space is fundamental to the implementation of increasingly site-specific management regimes that have the potential to greatly improve productivity across sites in the region. Fifteen plantation compartments situated on water shedding sites were identified where good weather data existed and a water balance model could be run. In addition, late wood samples were analysed from four co-dominant trees in the same stand to determine the δ13C values of five tree rings, each representing a specific growth year before first thinning. Detailed water balances were constructed for each trial site and drought stress indicators (a) relative canopy conductance (after Granier et al., 2000) and (b) the ratio of actual to potential evapotranspiration (supply / demand ratio), were related to δ13C values in latewood. Maximum available soil water ranged from 52 to 313 mm across trial sites. The water balance model used adequately described soil water availability throughout each growing season and indicated that stand stress due to the lack of available soil water mainly occurred during the summer months of the study period (November to April). The supply / demand ratio for this period as well as the relative canopy conductance proved to be good measures of drought stress. The six-month supply demand ratio (calculated for the period November to April) ranged from 0.04 to nearly 1 (winter rainfall zone) and 0.35 to 1 (all-year rainfall zone) and were strongly related to δ13C values (p < 0.001; r2 = 0.7822). It appears that using δ13C values, it may be possible to classify sites into three water availability classes. This classification may assist in the implementation of intensive silvicultural operations on an increasingly site-specific basis. Where sites are enriched with water from lateral flow or upslope positions, δ13C may be the only reliable technique to quantify soil water availability. / AFRIKAANSE OPSOMMING: Hierdie studie ondersoek die gebruik van koolstof isotope as 'n moontlike maatstaf vir die beskikbaarheid van water en droogtestremming in Pinus radiata in die Wes-en Suid-Kaap, Suid-Afrika. 'n Begrip van die beskikbaarheid van water en die ruimtelike variasie daarvan is fundamenteel vir die implementering van groeiplek-spesifieke bestuur sisteem wat die potensiaal het om baie verbeterde produktiwiteit oor persele in die streek teweeg te bring. Vyftien plantasievakke, geleë op waterskeidingsterreine is geïdentifiseer waar goeie weer data bestaan en 'n water balans model uitgevoer kon word. Daarmee saam is laathout monsters vanuit vier ko-dominante bome in dieselfde kompartement geanaliseer en die δ13C waardes van laathout in vyf jaarringe bepaal wat elk 'n spesifieke jaar van groei voor die eerste dunning verteenwoordig. Gedetailleerde water balanse is vir elke proef perseel bereken en aanwysers van droogtestremming, nl.: (a) relatiewe kroon geleiding (na Granier et al., 2000) en (b) die verhouding van die werklike teenoor potensiële evapotranspirasie (vraag / aanbod verhouding) is gekorreleer met 13C waardes in laat hout. Die maksimum hoeveelheid water beskikbaar op die verskeie proefpersele wissel van 52 tot 313 mm. Die water balans model wat gebruik is beskryf die beskikbare grondwater met genoegsame akkuraatheid. vir die hele groeiseisoen. Die model dui ook aan dat die kompartemente droogtestremming as gevolg van die gebrek aan beskikbare grond water ervaar gedurende die somer maande van die studie tydperk (November tot April). Die vraag / aanbod verhouding vir hierdie tydperk, asook die relatiewe kroon geleiding is geskik om as maatstawwe van droogtestremming gebruik te word. Die vraag / aanbod verhouding (bereken vir die tydperk November tot April) het gewissel van 0,04 tot byna 1 (Winter reënval gebied) en 0,35 tot 1 (die heel jaar reënval sone) en is sterk verwant aan 13C waardes (p <0,001; r2 = 0,7822). Dit blyk dat met die gebruik van δ13C waardes, dit moontlik kan wees om kompartemente te klassifiseer in drie klasse van water beskikbaarheid. Hierdie klassifikasie kan help met die implementering van intensiewe boskultuur bedrywighede op 'n meer vak-spesifieke basis. Waar vakkeverryk is met water vanuit laterale vloei of hoër liggende posisies, mag δ13C dalk die enigste betroubare tegniek wees om die beskikbaarheid van water te kwantifiseer.

Made available in DSpace on 2015-03-26T14:01:08Z (GMT). No. of bitstreams: 1 texto completo.pdf: 3104645 bytes, checksum: fee28715ca18f48d10ba2dabe782927e (MD5) Previous issue date: 2011-07-18 / A fim de reduzir o uso do dióxido de cloro no branqueamento de celulose kraft de Pinus radiata, com a seqüência OD(E+O+P)DD, exames laboratoriais foram realizados com enzimas (xilanase) de origem bacteriana e fúngica, que definiu que o trabalho em nível industrial deveria ser realizado com a enzima de origem fúngica. Do teste Industrial os seguintes resultados foram obtidos a partir da polpa tratada com 0,1 kg /ADt enzima xilanase fúngicas na sequência de branqueamento OD(E+O+P)DD: i) redução do consumo de dióxido de cloro em 4,8% ii) redução no consumo de hidróxido de sódio em 7%, iii) o aumento no consumo de energia de 8,9% no refino da polpa a 25 ° SR, iv) aumento moderado da DQO, que não representam mudanças significativas no efluente da área; v) alterações não significativas nas propriedades físicas e mecânicas da celulose e vi), houve uma redução do custo do branqueamento de 0,65 US$ /ADt. / Con el objetivo de reducir el uso de dióxido de cloro en el blanqueo de pulpa kraft de Pinus radiata, con la secuencia OD(E+O+P)DD , se realizaron pruebas de laboratorio con enzimas (xilanasa) de origen fungal y bacteriano, lo cual definió que a nivel de prueba industrial se trabajara con la de origen fungal. De la prueba industrial se obtuvieron los siguientes resultados desde la pulpa tratada con 0,1 Kg/ADT de enzima xilanasa fungal en la secuencia de blanqueo OD(E+O+P)DD: i) reducción en el consumo de dióxido de cloro de un 4,8%; ii) reducción en el consumo de hidróxido de sodio de un 7%; iii) aumento en el consumo de energía de un 8,9%, en la refinación de la pulpa hasta 25°SR; iv) moderado aumento de DQO, que no representan cambios significativos en el efluente del área; v) no hubo cambios significativos en las propiedades físico mecánicas entre la pulpa y vi) hubo una reducción de costo de la operación de blanqueo de 0,65 US$/ADT.

Made available in DSpace on 2015-03-26T14:01:14Z (GMT). No. of bitstreams: 1 texto completo.pdf: 1351821 bytes, checksum: 9d416acc090cd2c119cb3461e3880133 (MD5) Previous issue date: 2011-12-06 / Este estudo visa determinar, através de laboratório convencionais cozimento kraft, os efeitos da adição de polissulfeto no desempenho da celulose, hemicelulose, matéria orgânica do licor negro e físico-mecânicas da polpa, e entregar recomendações para testes na Constituição planta industrial, que tem um processo RDH. Os resultados mostram aumento no desempenho em relação ao de referência, 3,2% e 8,5% em Pinus radiata e 1,3% e 3,4% em Eucalyptus (mistura de 70% e 30% Eucalyptus nitens Eucalyptus globulus), para adições diferentes de polissulfeto. Esse aumento no desempenho pode ser explicado pelo maior teor de hemicelulose, o que confirma a ação protetora do polissulfeto. Os benefícios da aplicação em plantas de Constituição estes resultados indicam que a adição de polissulfeto de 1,5% teria um lucro anual de 3,8 milhão dólares, no montante de 10.500 mil dólares por ano, com a adição 3% do polissulfeto, razão pela qual se recomenda continuar com um estágio de aplicação industrial dentro da planta, para confirmar o custo final do projeto. / Este estudio tiene por objeto determinar, a través de cocciones Kraft convencionales de laboratorio, los efectos de la adición de polisulfuro en el rendimiento de la pulpa, contenido de hemicelulosas, contenido orgánico del licor negro y propiedades físico-mecánicas de la pulpa; y entregar las recomendaciones para realizar pruebas a nivel industrial en Planta Constitución, la cual posee un proceso RDH. Los resultados muestran aumentos en el rendimiento, con respecto a la referencia, de 3.2 % y 8.5 % en Pinus radiata y de 1.3 % y 3.4 % en Eucalyptus (mezcla de 70 % Eucalyptus nitens y 30 % Eucalyptus globulus), para distintas adiciones de polisulfuro. Este aumento en el rendimiento se puede explicar por el mayor contenido de hemicelulosas, lo que confirma la acción protectora del polisulfuro. Los beneficios de la aplicación en Planta Constitución de estos resultados, indican que para la adición de 1.5 % de polisulfuro se tendría un beneficio anual del orden de US$ 3.800.000; el que ascendería a US$ 10.500.000 al año con la adición de 3 % de polisulfuro, razón por la cual se recomienda continuar con una etapa de aplicación industrial en esa planta, para confirmar la rentabilidad final del proyecto.

This dissertation examined the impact of species, physiological age and spacing on tree form and branching at a Nelder experiment located near Rolleston, Canterbury. Two species were compared, Pinus radiata and Eucalyptus nitens, at a range of stockings from 271 stems/ha to 40,466 stems/ha. Within the P. radiata, two different physiological ages were compared. Stocking and species significantly affected (p-value <0.05) tree height, diameter at breast height (DBH), crown depth, branch mortality, branch angle, branch size and internode length. Only stocking was statistically significant for crown width, and height from the ground was also statistically significant for branch angle and branch mortality. DBH, crown width, crown depth, branch size and branch survival decreased with increasing stocking for both species. Branch angle and average internode length increased as stocking increased for both species, and branch angle and average internode length also increased as you moved away from the base of the tree. DBH, average internode length and branch size were significantly larger for P. radiata across all stockings, however branch mortality and branch angle were significantly larger for E. nitens. Physiological age was not statistically significant for any aspects of tree form or branching examined in this study.

Pinus radiata is the dominant species of the plantations forests in New Zealand. The forest industry in New Zealand is heavily dependant on it. However, Pinus radiata can develop wood quality flaw called 'intra-ring checking'. The checks or splits appear in wood during kiln drying and usually affect the earlywood region of the wood. It lowers value of appearance grade timber leading to huge economic loses for the forest industry. This thesis presents a study that was undertaken as a part of ongoing collaborative work that is being carried out to understand wood quality issues in Pinus radiata, with a vision of improving its wood quality. This study was a part of that effort and was conducted with an aim to gain an insight into intra-ring checking, and the process of xylogenesis in Pinus radiata. The investigations for this study were carried out in two steps. The first step was to understand intra-ring checking. The location of intra-ring checking was determined by observing the checks using various microscopy techniques. Scanning electron microscopy confirmed that checking was as an intercell failure that usually occurs at the cm1/S1 boundary. A comparative study was also conducted to see if the checked wood had some inherent properties that made it more susceptible to checking. It was found that checking could be influenced by tracheid geometry and cell wall thickness. If the wood had large tracheids with thin walls, it was more likely to develop checks during drying. Lignin distribution in the cell wall layers was also seen to play an important role in checking. Lower lignin levels and disruption in the pattern of lignification of the cell wall layers increased the tendency of the wood to develop checks. Similarly, it the tracheids have larger pits then their tendency to check increases. Structural features that disrupt the uniformity of the interlocking pattern of the tracheid such as rays and resin canals could also play a role in checking. Checked wood tends to have more surface area occupied by ray tissue. However, resin canals do not seem to be directly involved in checking, though their arrangement could indicate disturbances during xylogenesis. The second step was to understand the process of xylogenesis in Pinus radiata especially with respect to the influence of auxin and boron on it. Nutrient and organ culture methods were manipulated and successfully used to study xylogenesis. An exhaustive comparative study was carried out to observe and measure selected wood properties. Microscopy and image analysis revealed that auxin and boron changes in the medium led to the alterations in the cell division, expansion and lignification. However, the analysis of the measurements and the observations displayed complex 'between-tree' and 'within-culture variations'. Clear trends did not emerge from the analysis hence, a confident conclusion on the association between auxin, boron and lignification could not be drawn from this organ culture study. The study has added to the knowledge about checking and wood properties associated with it. A new tool of organ culture had been established that can hlep future research on the process of xylogenesis in Pinus radiata.

Background: The objective of this study was to verify the effect that plot locational errors, termed plot co-registration errors, have on the strength of regression between LiDAR canopy metrics and the measured total standing volume (TSV) of plots in a Pinus radiata forest. Methods: A 737 hectare plantation of mature Pinus radiata located in Northern Hawkes Bay was selected for the study. This forest had been measured in a pre-harvest inventory and had aerial LiDAR assessment. The location of plots was verified using a survey-grade GPS. Least square linear regression models were developed to predict TSV from LiDAR canopy metrics for a sample of 204 plots. The regression strength, accuracy and bias was compared for models developed using either the actual (verified) or the incorrect (intended) locations for these plots. The change to the LiDAR canopy metrics after the plot co-registration errors was also established. Results: The plot co-registration error in the sample ranged from 0.7 m to 70.3 m, with an average linear spatial error of 10.6 m. The plot co-registration errors substantially reduced the strength of regression between LiDAR canopy metrics and TSV, as the model developed from the actual plot locations had an R2 of 44%, while the model developed from the incorrect plot locations had an R2 of 19%. The greatest reductions in model strength occurred when there was less than a 60% overlap between the plots defined by correct and incorrect locations. Higher plot co-registration errors also caused significant changes to the height and density LiDAR canopy metrics that were used in the regression models. The lower percentile elevation LiDAR metrics were more sensitive to plot co- registration errors, compared to higher percentile metrics. Conclusion: Plot co-registration errors have a significant effect on the strength of regressions formed between TSV and LiDAR canopy metrics. This indicates that accurate measurements of plot locations are necessary to fully utilise LiDAR for inventory purposes in forests of Pinus radiata.

This thesis studied the influence of moisture content on the dynamic estimation of stiffness in wood of Pinus radiata D. Don. This is an important non-destructive measure for estimation of stiffness in standing trees, logs and lumber. Moisture content affects both acoustic velocity and density in the fundamental equation of dynamic MOE (DMOE = V²ρ, where V = acoustic velocity and ρ = density). Investigation included measurements with boards in the laboratory considering moisture contents below and above FSP as well as temperatures below and above 0°C. This also included field measurements of trees in contrasting climate sites and over different seasons including a long drought. Methods for measuring green density and moisture content and the patterns of variation of these parameters were also investigated. A secondary component of this thesis explored the wood quality and some mechanisms of tree response to water stress in two contrasting sites in terms or rainfall and water deficits in a region of Australia. The large increases in DMOE for frozen wood above the FSP (4.5 to 6 GPa) will limit the use of DMOE for grading logs in regions with freezing winters. Results from the experiment remeasuring young trees and the upper range of moisture content and temperatures above 0°C from the experiment with boards showed small to moderate variation in DMOE (0.1 to 1 GPa) which calls for further investigation on analytical procedures for adjustment of DMOE. Such procedures should consider that variations in acoustic velocity and density with changes in moisture content are not proportional and that there are counteracting effects between the two parameters. It remains to be investigated whether the typical variation (under normal climate conditions) in sapwood green density observed in our experiments has some implications for the use of DMOE. On the other hand, it is anticipated that the large differences along the stem and among stands in whole-section green density may bias DMOE measurements in logs for resource assessment. This also needs to be investigated. A comparison between acoustic velocity alone and DMOE for resource assessment under different scenarios is recommended. The study in two contrasting climate sites (high-altitude vs. warm-dry) in the Hume region of Forests NSW, Australia, including young (10-11 years) and mature trees (34 36 years) of radiata pine showed distinctive short and long-term responses of trees to cope with the water-limiting environment. In response to long-term water deficits the warm-dry site developed heartwood and thus reduced sapwood earlier and at faster rates than the high-altitude site. The onset of heartwood formation seemed to be triggered by some site threshold for water use as broadly indicated by the sapwood area/ha. The latter was consistently lower for the warm-dry site across the different stands. The warm-dry site also showed increased short-term responses to water stress and these were interpreted as seasonal mechanisms of the trees to cope with the limiting environment. The trees compensated for the lower available moisture and higher transpiration rates by lowering their saturation and disrupting water conduction at some points (cavitation). The inverse trends of cavitation spots and cavitation bands with height in the stem suggested the trees have different strategies to sacrifice conducting xylem depending on the position on the stem. Finally, it is suggested that saturation tended to fall to critical 'safe' levels as a result of water stress and this varied depending on age, site, and position in the stem. Significant decreases in DMOE and basic density were observed for the warm-dry site and were attributed to lower proportions of latewood due to lower rainfall for that site during the period of latewood formation. These showed no obvious association with any of the long-term water-stress traits (sapwood percentage and number of heartwood rings).

The introduction and establishment of a new and markedly different environment within a long established natural system provides an excellent opportunity to study the principles of adaptation and colonisation by native species. In Australia, an example is furnished by the conversion of large areas of native eucalypt forests to mono-cultured plantations of Monterey Pine (Pinus radiata). The principal aim of this study was to assess which species of native mammals, birds and higher plants are able to utilise or occupy such plantations. Successional aspects of community structure, and colonisation in pine forest systems, were investigated by considering stands of different ages. A variety of adjacent native eucalypt forests provided controls and indicated the range of potential colonisers. Various habitats in both forest types were studied with regard to potential nest sites and availability of food, in order to determine those habitats most favourable for mammals and birds. The effect, on wildlife, of clearing eucalypt forests, but leaving forest remnants along gullies, was also assessed.

Pinus radiata is the dominant species of the plantations forests in New Zealand. The forest industry in New Zealand is heavily dependant on it. However, Pinus radiata can develop wood quality flaw called 'intra-ring checking'. The checks or splits appear in wood during kiln drying and usually affect the earlywood region of the wood. It lowers value of appearance grade timber leading to huge economic loses for the forest industry. This thesis presents a study that was undertaken as a part of ongoing collaborative work that is being carried out to understand wood quality issues in Pinus radiata, with a vision of improving its wood quality. This study was a part of that effort and was conducted with an aim to gain an insight into intra-ring checking, and the process of xylogenesis in Pinus radiata. The investigations for this study were carried out in two steps. The first step was to understand intra-ring checking. The location of intra-ring checking was determined by observing the checks using various microscopy techniques. Scanning electron microscopy confirmed that checking was as an intercell failure that usually occurs at the cm1/S1 boundary. A comparative study was also conducted to see if the checked wood had some inherent properties that made it more susceptible to checking. It was found that checking could be influenced by tracheid geometry and cell wall thickness. If the wood had large tracheids with thin walls, it was more likely to develop checks during drying. Lignin distribution in the cell wall layers was also seen to play an important role in checking. Lower lignin levels and disruption in the pattern of lignification of the cell wall layers increased the tendency of the wood to develop checks. Similarly, it the tracheids have larger pits then their tendency to check increases. Structural features that disrupt the uniformity of the interlocking pattern of the tracheid such as rays and resin canals could also play a role in checking. Checked wood tends to have more surface area occupied by ray tissue. However, resin canals do not seem to be directly involved in checking, though their arrangement could indicate disturbances during xylogenesis. The second step was to understand the process of xylogenesis in Pinus radiata especially with respect to the influence of auxin and boron on it. Nutrient and organ culture methods were manipulated and successfully used to study xylogenesis. An exhaustive comparative study was carried out to observe and measure selected wood properties. Microscopy and image analysis revealed that auxin and boron changes in the medium led to the alterations in the cell division, expansion and lignification. However, the analysis of the measurements and the observations displayed complex 'between-tree' and 'within-culture variations'. Clear trends did not emerge from the analysis hence, a confident conclusion on the association between auxin, boron and lignification could not be drawn from this organ culture study. The study has added to the knowledge about checking and wood properties associated with it. A new tool of organ culture had been established that can hlep future research on the process of xylogenesis in Pinus radiata.

Ectomycorrhizal colonisation potential of Pinus radiata seedlings inoculated with the commercially available Trichoderma species bio-inoculant, Arbor-Guard™, was investigated in a commercial containerised nursery setting and in a separate glasshouse experiment, which included the co-inoculation of specific ectomycorrhizal fungi. Application of Arbor-Guard™ to Pinus radiata seedlings in a containerised commercial nursery had no significant effect on the ability of the naturally occurring ectomycorrhizal (ECM) fungi to colonise the seedlings. Thelephora terrestris was the dominant ectomycorrhizal species colonising the P. radiata root tips and has been described as a species able to rapidly outcompete other ECM species colonisation, particularly in high organic matter media like that used at the containerised commercial nursery investigated. In a similar experiment run to augment the commercial experiment, specific ECM fungi identified as Rhizopogon roseolus, Suillus luteus, and Rhizopogon villosulus were co-inoculated with Arbor-Guard™ to investigate the effect on the colonisation potential of the respective ECM species in combination with Trichoderma. The treatment effect of the addition of Arbor-Guard™ did not negatively impinge on the ECM species found, or the abundance of ECM root tips colonising the P. radiata seedlings. Ectomycorrhizal species in the Thelephoraceae family were the dominant species found colonising the P. radiata root tips. Of the inoculated ECM, S. luteus was the only detected species colonising the P. radiata root tips but was only found in low abundance. Non-conducive abiotic factors for optimum ECM colonisation were considered the most likely reason for the low colonisation of the inoculated ECM species. Any effect of the unintentional co-inoculation of the wood decaying fungi Hypholoma fasciculare and Lentinula edodes, due to misidentification, with the inoculated ECM species was unable to be resolved in this study. However, it was speculated that H. fasciculare may have had a negative effect on the inoculated ECM species colonisation. In vitro dual culture assays were initiated to investigate the specific interactions between each of the candidate ECM fungi inoculated in the glasshouse experiment when challenged with each of the six Trichoderma isolates in Arbor-Guard™. Both competition for nutrients and/ or space were concluded to be the main antagonistic mechanisms potentially used by five of the Trichoderma isolates against all co-inoculated ECM species and L. edodes. Hypholoma fasciculare was not inhibited by the five Trichoderma isolates, however, one Trichoderma isolate (LU 663) competitively antagonised all inoculated ectomycorrhizal/ saprophytic species before the mycelial fronts converged. Agar diffusible secondary metabolites were speculated to be potential mechanism of antagonism expressed by LU 663 over volatile antibiotics such as 6-pentyl-α-pyrone. No direct correlation could be dervived from the in vitro dual culture assays and what was observed in the containerised in planta results. Overall the results indicated no negative impact of the Trichoderma bio-inoculant Arbor-Guard™ on ectomycorrhizal colonisation of Pinus radiata seedlings in a containerised nursery system.