The objective of this study was to determine if trends were present in the longitudinal treatment of concepts of plate tectonics in introductory college-level physical geology textbooks. In addition, a method was designed to convey the structure of these concepts of plate tectonics by determining the location in the textbook where they occur.Eighteen textbooks were selected from the time period of 1975 through 2004. The total narrative area was determined by measuring the height and width of each column of text in each textbook. Individual concepts of plate tectonics were determined using the constant comparative method. Nine concepts were identified. The treatment of each concept was expressed as a concept's percentage of the textbook's total narrative area. The structure of plate tectonics in each textbook was determined by creating scatterplots and pie graphs of the location within the text and the area devoted to each concept. Furthermore, a measure of the structure of the textbook over the study period was determined by comparing the proportion of chapters containing concepts of plate tectonics with the publication date.A strong positive correlation (r=.638) was found between the treatment of the theory of plate tectonics and the publication date of the textbook. This correlation was significant to the 0.01 level. Two of the nine identified concepts of plate tectonics were also found to have significant correlations.Similarly, a strong positive correlation was found between the proportion of chapters containing concepts of plate tectonics and the publication date. Thus, concepts of plate tectonics are found in more chapters in textbooks published during the latter parts of the study period.A concern arising from this study is the treatment of the concept identified as "The evidence for and the development of plate tectonics." This is the only identified concept of plate tectonics that showed a marked decrease during the study period. Furthermore, this concept corresponds with other studies that found many of America's textbooks reporting the end results of science while omitting the nature of science. / Department of Geology

Thesis (Ph. D.)--University of Hawaii at Manoa, 1991. / Includes bibliographical references (leaves 161-173) / Microfiche. / xvi, 173 leaves, bound ill., maps 29 cm

The Alpine Fault is the major structure of the Pacific-Australian plate boundary through New Zealand�s South Island. During dextral reverse fault slip, a <5 million year old, ~1 km thick mylonite zone has been exhumed in the hanging-wall, providing unique exposure of material deformed to very high strains at deep crustal levels under boundary conditions constrained by present-day plate motions. The purpose of this study was to investigate the fault zone rheology and mechanisms of strain localisation, to obtain further information about how the structural development of this shear zone relates to the kinematic and thermal boundary constraints, and to investigate the mechanisms by which the viscously deforming mylonite zone is linked to the brittle structure, that fails episodically causing large earthquakes. This study has focussed on the central section of the fault from Harihari to Fox Glacier. In this area, mylonites derived from a quartzofeldspathic Alpine Schist protolith are most common, but slivers of Western Province-derived footwall material, which can be differentiated using mineralogy and bulk rock geochemistry, were also incorporated into the fault zone. These footwall-derived mylonites are increasingly common towards the north. At amphibolite-facies conditions mylonitic deformation was localised to the mylonite and ultramylonite subzones of the schist-derived mylonites. Most deformation was accommodated by dislocation creep of quartz, which developed strong Y-maximum crystallographic preferred orientation (CPO) patterns by prism (a) dominant slip. Formation of this highly-oriented fabric would have led to significant geometric softening and enhanced strain localisation. During this high strain deformation, pre-existing Alpine Schist fabrics in polyphase rocks were reconstituted to relatively well-mixed, finer-grained aggregates. As a result of this fabric homogenisation, strong syn-mylonitic object lineations were not formed. Strain models show that weak lineations trending towards ~090� and kinematic directions indicated by asymmetric fabrics and CPO pattern symmetry could have formed during pure shear stretches up-dip of the fault of ~3.5, coupled with simple shear strains [greater than or equal to]30. The preferred estimate of simple:pure shear strain gives a kinematc vorticity number, W[k] [greater than or equal to]̲ 0.9997. Rapid exhumation due to fault slip resulted in advection of crustal isotherms. New thermobarometric and fluid inclusion analyses from fault zone materials allow the thermal gradient along an uplift path in the fault rocks to be more precisely defined than previously. Fluid inclusion data indicate temperatures of 325+̲15�C were experienced at depths of ~45 km, so that a high thermal gradient of ~75�C km⁻� is indicated in the near-surface. This gradient must fall off to [ less than approximately]l0�C km⁻� below the brittle-viscous transition since feldspar thermobarometry, Ti-inbiotite thermometry and the absence of prism(c)-slip quartz CPO fabrics indicate deformation temperatures did not exceed ~ 650�C at [greater than or equal to] 7.0-8.5�1.5 kbar, ie. 26-33 km depth. During exhumation, the strongly oriented quartzite fabrics were not favourably oriented for activation of the lower temperature basal(a) slip system, which should have dominated at depths [less than approximately]20 km. Quartz continued to deform by crystal-plastic mechanisms to shallow levels. However, pure dislocation creep of quartz was replaced by a frictional-viscous deformation mechanism of sliding on weak mica basal planes coupled with dislocation creep of quartz. Such frictional-viscous flow is particularly favoured during high-strain rate events as might be expected during rupture of the overlying brittle fault zone. Maximum flow stresses supported by this mechanism are ~65 Mpa, similar to those indicated by recrystallised grain size paleopiezometry of quartz (D>25[mu]m, indicating [Delta][sigma][max] ~55 MPa for most mylonites). It is likely that the preferentially oriented prism (a) slip system was activated during these events, so the Y-maximum CPO fabrics were preserved. Simple numerical models show that activation of this slip system is favoured over the basal (a) system, which has a lower critical resolved shear stress (CRSS) at low temperatures, for aggregates with strong Y-maximum orientations. Absence of pervasive crystal-plastic deformation of micas and feldspars during activation of this mechanism also resulted in preservation of mineral chemistries from the highest grades of mylonitic deformation (ie. amphibolite-facies). Retrograde, epidote-amphibolite to greenschist-facies mineral assemblages were pervasively developed in ultramylonites and cataclasites immediately adjacent to the fault core and in footwall-derived mylonites, perhaps during episodic transfer of this material into and subsequently out of the cooler footwall block. In the more distal protomylonites, retrograde assemblages were locally developed along shear bands that also accommodated most of the mylonitic deformation in these rocks. Ti-in-biotite thermometry suggests biotite in these shear bands equilibrated down to ~500+̲50�C, suggesting crystal-plastic deformation of this mineral continued to these temperatures. Crossed-girdle quartz CPO fabrics were formed in these protomylonites by basal (a) dominant slip, indicating a strongly oriented fabric had not previously formed at depth due to the relatively small strains, and that dislocation creep of quartz continued at depths [less than or equal to]20 km. Lineation orientations, CPO fabric symmetry and shear-band fabrics in these protomylonites are consistent with a smaller simple:pure shear strain ratio than that observed closer to the fault core (W[k] [greater than approximately] 0.98), but require a similar total pure shear component. Furthermore, they indicate an increase in the simple shear component with time, consistent with incorporation of new hanging-wall material into the fault zone. Pre-existing lineations were only slowly rotated into coincidence with the mylonitic simple shear direction in the shear bands since they lay close to the simple shear plane, and inherited orientations were not destroyed until large finite strains (<100) were achieved. As the fault rocks were exhumed through the brittle-viscous transition, they experienced localised brittle shear failures. These small-scale seismic events formed friction melts (ie. pseudotachylytes). The volume of pseudotachylyte produced is related to host rock mineralogy (more melt in host rocks containing hydrated minerals), and fabric (more melt in isotropic host rocks). Frictional melting also occurred within cataclastic hosts, indicating the cataclasites around the principal slip surface of the Alpine Fault were produced by multiple episodes of discrete shear rather than distributed cataclastic flow. Pseudotachylytes were also formed in the presence of fluids, suggesting relatively high fault gouge permeabilities were transiently attained, probably during large earthquakes. Frictional melting contributed to formation of phyllosilicate-rich fault gouges, weakening the brittle structure and promoting slip localisation. The location of faulting and pseudotachylyte formation, and the strength of the fault in the brittle regime were strongly influenced by cyclic hydrothermal cementation processes. A thermomechanical model of the central Alpine Fault zone has been defined using the results of this study. The mylonites represent a localised zone of high simple shear strain, embedded in a crustal block that underwent bulk pure shear. The boundaries of the simple shear zone moved into the surrounding material with time. This means that the exhumed sequence does not represent a simple 'time slice' illustrating progressive fault rock development during increasing simple shear strains. The deformation history of the mylonites at deep crustal P-T conditions had a profound influence on subsequent deformation mechanisms and fabric development during exhumation.

Thesis (M.S.)--University of Nevada, Reno, 2007. / "May, 2007." Includes bibliographical references (leaves 155-165). Online version available on the World Wide Web.

Thesis (Ph.D.)--University of Melbourne, School of Earth Sciences, 2007. / Typescript. Includes bibliographical references (leaves 197-215).

Thesis (Ph.D.) - University of Glasgow, 2007. / Ph.D. thesis submitted to the Department of Geographical and Earth Sciences, Physical Sciences Faculty, University of Glasgow, 2007. Includes bibliographical references. Print version also available.

Thesis (MS)--Montana State University--Bozeman, 2008. / Typescript. Chairperson, Graduate Committee: David R. Lageson. Includes bibliographical references (leaves 85-93).

Thesis (Ph. D.)--University of Washington, 1999. / Vita. Includes bibliographical references (leaves 114-131).

Thesis (Ph. D.)--Carleton University, 1997. / Also available in electronic format on the Internet.

Thesis (Ph. D.)--Ohio State University, 2006. / Title from first page of PDF file. Includes bibliographical references (p. 191-205).