Although, the use of vinyl pyridine polymers, especially as matrices for nanoparticle synthesis, is growing considerably, the knowledge of thermal degradation behavior is still missing in the literature. In this study, thermal degradation characteristics of the homopolymers / poly(4-vinylpyridine), P4VP, and poly(2-vinylpyridine), P2VP, the diblock copolymers / polystyrene-blockpoly( 2-vinylpyridine), (PS-b-P2VP) and polystyrene-block-poly(4-vinylpyridine), (PS-b-P4VP), and the metal functional vinyl polymers / cobalt-polystyrene-blockpoly( 2-vinylpyridine) and cobalt-polystyrene-block-poly(4-vinylpyridine) were investigated by direct pyrolysis mass spectrometry. The effects of the position of the nitrogen in the pyridine ring, composition and molecular weight of diblock copolymer and coordination of the metal to the pyridine ring of the copolymer on thermal behavior were also investigated. The results showed that unlike most of the vinyl polymers that decompose via depolymerization, P2VP degrades through opposing reaction pathways / depolymerization, proton transfer to N atom in the pyridine ring yielding unsaturated linkages on the polymer backbone that decompose slightly at higher temperatures and loss of pyridine units. On the other hand the thermally less stable P4VP decomposition follows v depolymerization in accordance to general expectations. Another finding was the independent decomposition of both components of the diblock polymers, (PS-b- P2VP) and (PS-b-P4VP). Thermal degradation occurs in two main steps, the thermally less stable P2VP or P4VP chains degrade in the first step and in the second step decomposition of PS takes place. It was also concluded that upon coordination of metal, thermal stability of both P2VP and P4VP increases significantly. For metal functional diblock copolymers thermal degradation of chains coordinated to Co metal through N in the pyridine ring occurred in three steps / cleavage of pyridine coordinated to Co, coupling and H-transfer reactions yielding unsaturated and/or crosslinked structure and decomposition of these thermally more stable unsaturated and/or crosslinked blocks. TEM imaging of the metal functional block copolymers along with the results of the pyrolysis mass spectrometry pointed out that PS-b-P2VP polymer is a better and more effective matrix for nanoparticle synthesis.

Miniaturization has become a driving force in different areas of technology including microelectronics, sensoric- and bio-technologies and in fundamental science. Because of the well-known limitations of conventional lithographic methods, newly emerging bottom-up approach, utilizing self-assembly of various nanoobjects including single polymer molecules and carbon nanotubes constitutes a very promising alternative for fabrication of ultimately small devices. Carbon nanotubes are attractive materials for nanotechnology and hold much promise to revolutionize fundamental science in a investigation of phenomena, associated with the nanometer–sized objects.It was found in this work that grafted chains of poly(2-vinylpyridine) form a shell covering the carbon nanotubes that makes them dispersible in organic solvents and in acidic water (CNTs-g-P2VP).The positively charged poly(2-vinylpyridine) shell is responsible for the selective deposition of carbon nanotubes onto oppositely charged surfaces. It was established that the deposition CNTs-g-P2VP from aqueous dispersions at low pH is an effective method to prepare ultra-thin films with a tunable density of carbon nanotubes.It was shown that poly(2-vinylpyridine) grafted to carbon nanotubes is a universal support for the immobilization of various nanoclusters at the carbon nanotube's surface. Prussian Blue nanoparticles were selectively attached to the surface of CNTs-g-P2VP.Conducting polymer nanowires are another very promising kind of nanomaterials that could be also suitable for applications in nanodevices and nanosensors. In this work was developed a simple method to control the conformation and orientation of single adsorbed polyelectrolyte molecules by co-deposition with octylamine. A simple chemical route to conductive polypyrrole nanowires by the grafting of polypyrrole from molecules of polystyrensulfonic acid was developed. The dc conductivity of individual polypyrrole nanowires approaches the conductivity of polypyrole in bulk.The conductivity can be described using variable-range hopping model.

Miniaturization has become a driving force in different areas of technology including microelectronics, sensoric- and bio-technologies and in fundamental science. Because of the well-known limitations of conventional lithographic methods, newly emerging bottom-up approach, utilizing self-assembly of various nanoobjects including single polymer molecules and carbon nanotubes constitutes a very promising alternative for fabrication of ultimately small devices. Carbon nanotubes are attractive materials for nanotechnology and hold much promise to revolutionize fundamental science in a investigation of phenomena, associated with the nanometer–sized objects.It was found in this work that grafted chains of poly(2-vinylpyridine) form a shell covering the carbon nanotubes that makes them dispersible in organic solvents and in acidic water (CNTs-g-P2VP).The positively charged poly(2-vinylpyridine) shell is responsible for the selective deposition of carbon nanotubes onto oppositely charged surfaces. It was established that the deposition CNTs-g-P2VP from aqueous dispersions at low pH is an effective method to prepare ultra-thin films with a tunable density of carbon nanotubes.It was shown that poly(2-vinylpyridine) grafted to carbon nanotubes is a universal support for the immobilization of various nanoclusters at the carbon nanotube's surface. Prussian Blue nanoparticles were selectively attached to the surface of CNTs-g-P2VP.Conducting polymer nanowires are another very promising kind of nanomaterials that could be also suitable for applications in nanodevices and nanosensors. In this work was developed a simple method to control the conformation and orientation of single adsorbed polyelectrolyte molecules by co-deposition with octylamine. A simple chemical route to conductive polypyrrole nanowires by the grafting of polypyrrole from molecules of polystyrensulfonic acid was developed. The dc conductivity of individual polypyrrole nanowires approaches the conductivity of polypyrole in bulk.The conductivity can be described using variable-range hopping model.

Diese Arbeit liefert die Grundlage für intelligente Beschichtungen aus kovalent gebundenen Polymeren, sogenannten Polymerbürsten, mit Schichtdicken von wenigen Nanometern. Durch ihre Fähigkeit die Oberflächeneigenschaften je nach Umgebungstemperatur, pH Wert und Zusammensetzung zu ändern, kann die Adsorption von Biomolekülen auf eine einzigartige Art und Weise kontrolliert und reguliert werden. Die zusätzliche Modifizierung der Polymerbürsten mit Elektronenstrahlen ermöglicht die Generierung von Gradienten und erweitert die Anwendungsmöglichkeiten in vielfältigen Bereichen der interdisziplinären Forschung, wie z.B. in Hinblick auf das Lab-on-Chip Design oder die Biomedizin. / Polymer brushes represent sensitive coatings with thicknesses of few nanometres and are interesting for interdisciplinary scientific research, e.g. for intelligent lab-on-chip design or biotechnology. It is demonstrated in this work, that polymer brushes are able to change their surface properties depending on the ambient conditions like solvent quality, temperature or pH value. This sensitivity highly influenced the adsorption of bio molecules. Especially mixed polymer brushes enabled the tuning of the adsorbed amount of various proteins and cells. To create surface gradients or structures in the different polymer brush surfaces, controlled electron beam modification was applied.

Diese Arbeit liefert die Grundlage für intelligente Beschichtungen aus kovalent gebundenen Polymeren, sogenannten Polymerbürsten, mit Schichtdicken von wenigen Nanometern. Durch ihre Fähigkeit die Oberflächeneigenschaften je nach Umgebungstemperatur, pH Wert und Zusammensetzung zu ändern, kann die Adsorption von Biomolekülen auf eine einzigartige Art und Weise kontrolliert und reguliert werden. Die zusätzliche Modifizierung der Polymerbürsten mit Elektronenstrahlen ermöglicht die Generierung von Gradienten und erweitert die Anwendungsmöglichkeiten in vielfältigen Bereichen der interdisziplinären Forschung, wie z.B. in Hinblick auf das Lab-on-Chip Design oder die Biomedizin. / Polymer brushes represent sensitive coatings with thicknesses of few nanometres and are interesting for interdisciplinary scientific research, e.g. for intelligent lab-on-chip design or biotechnology. It is demonstrated in this work, that polymer brushes are able to change their surface properties depending on the ambient conditions like solvent quality, temperature or pH value. This sensitivity highly influenced the adsorption of bio molecules. Especially mixed polymer brushes enabled the tuning of the adsorbed amount of various proteins and cells. To create surface gradients or structures in the different polymer brush surfaces, controlled electron beam modification was applied.