No description available.

No description available.

No description available.

No description available.

No description available.

No description available.

Numerous applications in neuroscience research and neural prosthetics, such as retinal prostheses, spinal-cord surface stimulation for prosthetics, electrocorticogram (ECoG) recording for epilepsy detection, etc., involve electrical interaction with soft excitable tissues using a surface stimulation and/or recording approach. These applications require an interface that is able to set up electrical communications with a high throughput between electronics and the excitable tissue and that can dynamically conform to the shape of the soft tissue. Being a compliant and biocompatible material with mechanical impedance close to that of soft tissues, polydimethylsiloxane (PDMS) offers excellent potential as the substrate material for such neural interfaces. However, fabrication of electrical functionalities on PDMS has long been very challenging. This thesis work has successfully overcome many challenges associated with PDMS-based microfabrication and achieved an integrated technology platform for PDMS-based stretchable microelectrode arrays (sMEAs). This platform features a set of technological advances: (1) we have fabricated uniform current density profile microelectrodes as small as 10 microns in diameter; (2) we have patterned high-resolution (feature as small as 10 microns), high-density (pitch as small as 20 microns) thin-film gold interconnects on PDMS substrate; (3) we have developed a multilayer wiring interconnect technology within the PDMS substrate to further boost the achievable integration density of such sMEA; and (4) we have invented a bonding technology---via-bonding---to facilitate high-resolution, high-density integration of the sMEA with integrated circuits (ICs) to form a compact implant. Taken together, this platform provides a high-resolution, high-density integrated system solution for neural and muscular surface interfacing. sMEAs of example designs are evaluated through in vitro and in vivo experimentations on their biocompatibility, surface conformability, and surface recording/stimulation capabilities, with a focus on epimysial (i.e. on the surface of muscle) applications. Finally, as an example medical application, we investigate a prosthesis for unilateral vocal cord paralysis (UVCP) based on simultaneous multichannel epimysial recording and stimulation.

Molecular weights of 2,000, 6,000 and 10,000 of silane functionalized atactic polystyrene (aPS) and α,ω-divinyl functionalized polydimethylsiloxane (PDMS) were prepared via living anionic polymerization and bulk anionic ring opening polymerization respectively. Functionalization of the homopolymers was confirmed by FT-IR and 1H-NMR spectroscopy and their molecular weights were determined via 1H-NMR end group analysis. A hydrosilylation reaction between the functionalized homopolymers of different molecular weights produced nine polystyrene-block-polydimethylsiloxane-block-polystyrene (aPS-b-PDMS-b-aPS) triblock copolymers. Field emission scanning electron microscopy observations revealed the copolymers self-assemble into supramolecular structures. Dynamic Light Scattering measurements show only small increase in the order of nanometers of its hydrodynamic radius as the individual molecular weights of the homopolymers were increased. Nanocomposites of the copolymers were prepared by incorporating 1% of oxidized single walled carbon nanotubes (SWNTs) within the aPS-PDMS-aPS matrices via coagulation precipitation. Differential scanning calorimetry (DSC) thermal analysis shows the SWNT interacting with both aPS and PDMS constituting blocks. SWNTs interaction with aPS block either increases the polymer glass transition temperature (Tg) by restricting its segmental motion or decreases the Tg by a plasticization effect. Within the PDMS block the SWNTs act as nucleating sites accelerating the crystallization rate of the polymer. This is evident by the appearance of single and double melting endotherms in the DSC thermograms.

Les composants optiques (miroirs, lentilles, hublots…) présents sur les chaînes du Laser Mégajoule (LMJ) sont susceptibles de s’endommager sous flux laser de forte énergie en particulier à la longueur d’onde 351 nm. Les dommages se présentent sous la forme de cratères de quelques micromètres de diamètre qui apparaissent et croissent en face arrière des optiques en silice. Dans ce contexte, le but de ces travaux est de développer des revêtements de protection qui visent, par leurs propriétés d’amortissement au choc, d’autocicatrisation, ou de post réparation, à limiter la croissance de ces dommages. Des couches minces, de quelques micromètres d’épaisseur ont été préparées par procédé sol-gel et déposées sur la face arrière des optiques. L’élaboration de ces couches s’effectue par la synthèse sol-gel d’une solution composée d’un précurseur de silice et d’un élastomère polydiméthylsiloxane (PDMS). / The optical devices (lents, mirrors, portholes…) that are set on the chains of the Laser Megajoule (LMJ) may be damaged by the high energy laser beam especially around the UV wavelength of 351 nm. The damages are micronics craters on the rear of the optics that grows exponentially after each laser shots. The study aim at developing some optical thin coatings on the rear of the optical substrates to prevent the growth of the damage by amortizing the laser shockwave, self-healing the craters that has appeared, or repairing the laser hole after the damage occurs. The thin coatings have been prepared by a sol-gel method by using silica precursor and a polydimethylsiloxane (PDMS) elastomer. The two species reacted together to get a hybrid organic-inorganic Ormosil (organically modified silica) material, by creating a silica network linked to the PDMS species with covalent and hydrogens bounds. The thin layers are obtained from the sol-gel solution by using a dip and spin coating method.

This thesis describes the design, fabrication, and testing process for a microfluidic phosphate colorimeter utilized for water quality analysis. The device can be powered by, and interfaced for data collection with, a common cell phone or laptop to dramatically reduce costs. Unlike commercially available colorimeters, this device does not require the user to measure or mix sample and reagent. A disposable poly(dimethylsiloxane) (PDMS) microfluid chip, powered by an absorption pumping mechanism, was used to draw water samples, mix the sample at a specific ratio with a molybdovanadate reagent, and load both fluids into an onboard cuvette for colorimetric analysis. A series of capillary retention valves, channels, and diffusion pumping surfaces passively controls the microfluidic chip so that no user input is required. The microfluidic chip was fabricated using a modified SU-8 soft lithography process to produce a 1.67mm light absorbance pathlength for optimal Beer Lambert Law color absorbance. Preliminary calibration curves for the device produced from standard phosphate solutions indicate a range of detection between 5 to 30mg/L for reactive orthophosphate with a linearity of R²=91.3% and precision of 2.6ppm. The performance of the PDMS absorption driven pumping process was investigated using flow image analysis and indicates an effective pumping rate up to approximately 7µL/min to load a 36µL sample.