Characterization of the pore structure is a crucial part in themanufacturing of porous media used for purification of biologicalpharmaceuticals. This project took place at Cytiva in Uppsala and aimedat optimizing a newly developed method in pore structurecharacterization called size-exclusion quantification NMR (SEQ-NMR). Bymeasuring with diffusion NMR on a polymer solution before and afterequilibration with a material of interest the pore structure of thematerial can be determined. This project aimed at reducing the durationof a SEQ-NMR experiment while examining the performance of the methodduring different conditions with the goal of making the methodapplicable for quality control procedures. The method was optimizedboth by simulations and by experimental diffusion NMR measurements. Itwas discovered that the performance of the method could be improved byhaving an optimal mixture of the polymer solution and duringexperiments distributing ten measurement points with linear spacing.With these parameters optimized the duration of the method could bereduced with 22 hours landing on a total duration of 8 hours. Theduration combined with the complexity of the method still makes themethod unsuitable for use in quality control of porous media. Despitethe small possibility of SEQ-NMR being a quality control method thisproject has proven the method to be both reproducible and sensitive.

Woven barrier fabrics for filtration and operating room textiles feature permeable pore channels between yarn interlocking points (mesopores), which create an increased risk of penetration by contaminated fluids and particles. These pore channels can be reduced in size by high-density weaving. This, however, results in deteriorated drapability and performance characteristics. To meet the requirements made on the barrier effect without impairing the physiological properties of the textile, fluid-tight and particle-tight woven fabrics with adjustable porosity are being developed. This research aim could be realized by the targeted and partial application of microparticles into the mesopores. There, they form a meshed structure in the pores, whose size is thus reduced without them being entirely obstructed. The simultaneous retention of the micropores (pores between the individual filaments) in the woven fabric guarantees preservation of the physiological characteristics of the textile. The efficiency of the finishing was examined by an extensive physiological and physical characterization of the woven fabrics before and after particle application. Regarding the test method used to monitor the barrier effect and the channel paths, a test device was modified to simulate the demands of later, practical use.

The work deals with the preparation and mechanical properties of coated Bioglass® 45S5 based foam materials with open porosity. The samples have been fabricated applying the replication method with use of polyurethane foam. Furthermore, these samples were coated in order to increase the strength characteristics and crack resistance. Polyvinylalcohol and PVA with cellulose microfibrils have been used as coating. Besides microstructural parameters of investigated materials using the SEM images strength characteristics in compression and in tension were also quantified.

No description available.

[Truncated abstract] Self-filtration is here defined as particle detachment and re-deposition causing re-arrangement of the particles and therefore pore space which affects water flow in soil by decreasing hydraulic conductivity. This is of particular important in soils which are susceptible to structural breakdown. The objective of this thesis was to examine the dynamics of the self-filtration process in sodic sandy soils as affected by ionic strength and soil solution composition. The temporal changes of hydraulic conductivity and the elution of fine particles from soil columns were used as the main criteria to assess selffiltration. Two porous media exhibiting significantly different structural cohesion were examined, one a loamy sand (Balkuling soil) from agricultural land use and the second a mining residue from mineral sands operations . . . The effects of the composition of mixed calcium (Ca) and sodium (Na) ions in solution (sodium adsorption ratio (SAR)) on the exchange behaviour and saturated hydraulic conductivity were examined by carrying out batch binary exchange and saturated column transport experiments. A strong preference for Ca2+ ions in the exchange complex was observed for both soils. Generally K/Ko was found to decrease with increasing sodium adsorption ratio with the more structured Balkuling soil maintaining K/Ko for SARs 3 and 5 at an electrolyte concentration of 100 mmol/L. However measurements at the critical threshold and turbidity concentrations at a SAR of 15 revealed structural breakdown of the pore matrix system attributed to various extents of slaking, swelling, dispersion and decreases of pore radii as a result of selffiltration during leaching. These experiments illustrate the wide range of complex interactions involving clay mineralogy, solution composition and structural factors which can influence the extent of mobilization, transport and re-deposition of colloidal particles during the leaching process in soil profiles.

Autoclaved sand aerated concrete is a modern building material with high thermal insulation properties. Only sand is used as the primary silicate component of aerated concrete in the Czech Republic. For the more favourable economic and ecological properties of aerated concrete, the use of secondary raw materials is used in this work. The secondary raw materials examined included fluidized bed and fly ash, slag and glass recycled. The aerated concrete composite with secondary admixtures was developed under hydrothermal conditions of a laboratory autoclave for 7 and 12 hours at 190°C. From the secondary raw materials tested, a 10% glass recycler additive yielded the highest strength. Other additives that have a positive effect on mechanical properties include SAKO and Oslavany. From the results of the work it is evident that the use of secondary raw materials increases the strength, improves the rheology of the mixture and supports the formation of tobermorite.