Spelling suggestions: "subject:"more pressures"" "subject:"core pressures""
1 |
Geostatistics applied to probabilistic slope stability analysis in the china clay deposits of CornwallPascoe, Denise Margaret January 1996 (has links)
No description available.
|
2 |
Numerical formulation for a dynamic analysis of the plastic behavior in saturated granular soilsSong, Chi Yong January 2003 (has links)
No description available.
|
3 |
Investigation of Pore Pressures During High-Velocity Impact by a Free Fall PenetrometerMumtaz, Muhammad Bilal 28 June 2018 (has links)
Free-fall penetrometers (FFPs) are an attractive tool for the rapid characterization of sediments in the nearshore and coastal areas. To improve their measurement capabilities, modern FFPs can be equipped with pore pressure sensors. Pore pressure measurements are extensively used in traditional cone penetration testing, but their usage and interpretation is still limited for FFP testing. This thesis represents an effort to advance the interpretation of pore pressure measurements from FFP testing.
Data was collected using the torpedo-shaped FFP BlueDrop during surveys at Herschel Island, YT, Yakutat, AK, Clay Bank, VA, and Yorktown, VA. Additionally, test deployments in the laboratory were performed in kaolin clay. Data analysis was focused on pore pressure measurements during these deployments. Two major advancements regarding current data analysis of FFP pore pressure measurements were explored: 1) a method based on fluid dynamic principles was proposed to correct the pressure recordings for the dynamic flow effects due to the high-velocity fall and impact. The results show that using Bernoulli’s theorem coupled with the concept of pressure coefficients results in good agreement between measured and hydrostatic pressures during the free-fall and initial penetration stage. 2) Pore pressure dissipation curves measured by the penetrometer at rest at maximum penetration depth were also studied. The mechanisms behind the non-standard dissipation curves were explored. The results suggest that non-standard dissipation curves can be interpreted by correcting according to Sully et al.’s (1999) extrapolation technique. The technique can also be used with data from an unsaturated or clogged filter. / Master of Science / An increasing use of nearshore and offshore areas for the development of infrastructure such as pipelines, cables, renewable energy harvesting devices, and measures against coastal erosion warrants the development of specialized methods for investigating the stability of the seabed. Portable free-fall penetrometers represent a cost-efficient approach to characterize shallow seabed sediments, but there are challenges associated with deriving geotechnical design parameters from these novel instruments.
This study aims at developing a better understanding of the pore pressure (the pressure developed in the water in the soil’s voids) data obtained during free-fall penetration testing. The pore pressures developed during the penetration of the penetrometer is dependent on the soil type, and is often used to correlate to it. This study used data obtained from field surveys at Herschel Island, YT, Clay Bank, VA, Yakutat, AK, and Yorktown, VA. Additionally, controlled tests were performed in the laboratory in an instrumented seabed. This study resulted in a novel method to correct the pressure data from the penetrometer for dynamic fluid flow effects and validation of an interpretation technique for dissipation curves to obtain the time required for consolidation, based on initial results.
|
4 |
The Effects Of Non-Plastic and Plastic Fines On The Liquefaction Of Sandy SoilsPolito, Carmine Paul 20 January 2000 (has links)
The presence of silt and clay particles has long been thought to affect the behavior of a sand under cyclic loading. Unfortunately, a review of studies published in the literature reveals that no clear conclusions can be drawn as to how altering fines content and plasticity actually affects the liquefaction resistance of a sand. In fact, the literature contains what appears to be contradictory evidence. There is a need to clarify the effects of fines content and plasticity on the liquefaction resistance of sandy soils, and to determine methods for accounting for these effects in engineering practice.
In order to help answer these questions, a program of research in the form of a laboratory parametric study intended to clarify the effects which varying fines content and plasticity have upon the liquefaction resistance of sandy sands was undertaken. The program of research consisted of a large number of cyclic triaxial tests performed on two sands with varying quantities of plastic and non-plastic fines. The program of research also examined the applicability of plasticity based liquefaction criteria and the effects of fines content and plasticity on pore pressure generation. Lastly, a review of how the findings of this study may affect the manner in which simplified analyses are performed in engineering practice was made.
The results of the study performed are used to clarify the effects of non-plastic fines content and resolve the majority of the inconsistencies in the literature. The effects of plastic fines content and fines plasticity are shown to be different than has been previously reported. The validity of plasticity based liquefaction criteria is established, the mechanism responsible for their validity is explained, and a new simplified criteria proposed. The effects of fines content and plasticity on pore pressure generation are discussed, and several recommendations are made for implementing the findings of this study into engineering practice. / Ph. D.
|
5 |
Undrained Seismic Response of Underground StructuresEimar A Sandoval Vallejo (6635912) 10 June 2019 (has links)
<div>Underground structures must be able to support static overburden loads, as well as to accommodate additional deformations imposed by seismic motions. Progress has been made in the last few years in understanding the soil-structure interaction mechanisms and the stress and displacement transfer from the ground to the structure during a seismic event. It seems well established that, for most tunnels, the most critical demand to the structure is caused by shear waves traveling perpendicular to the tunnel axis. Those waves cause distortions of the cross section (ovaling for a circular tunnel, and racking for a rectangular tunnel) that result in axial forces (thrusts) and bending moments. While all this has been well-studied for structures placed in linear-elastic ground, there is little information regarding the behavior of buried structures placed in nonlinear ground, especially under undrained conditions, i.e., when excess pore pressures generate and accumulate during the earthquake.</div><div><br></div><div><div>Two-dimensional dynamic numerical analyses are conducted to assess the seismic response of deep circular tunnels located far from the seismic source, under drained or undrained loading conditions. It is assumed that the liner remains elastic and that plane strain conditions apply. </div><div> A new cyclic nonlinear elastoplastic constitutive model is developed and verified, to simulate the nonlinear behavior and excess pore pressures accumulation with cycles of loading in the ground. The results of the numerical analyses show negligible effect of input frequencies on the normalized distortions of a tunnel for input frequencies smaller than 5 Hz (the distortions of the tunnel are normalized with respect to those of the free field); that is, for ratios between the wavelength of the seismic input and the tunnel opening larger than about eight to ten. The results also show that undrained conditions, compared with drained conditions, tend to reduce deformations for flexible liners and increase them for stiffer tunnels, when no accumulation of pore pressures with cycles of loading is assumed. However, when pore pressures increase with the number of cycles, the differences in distortions between drained and undrained loading are reduced, i.e., the normalized distortions increase for flexible and decrease for stiff tunnels, compared to those with drained conditions. </div></div><div><br></div><div><div>Undrained loading produces larger thrust in the liner than drained loading for stiff tunnels with flexibility ratio F ≤ 2.0.</div><div>For more flexible tunnels with F > 2.0, the behavior is the opposite, i.e., smaller axial forces are obtained for undrained loading than for drained loading. Including excess pore pressure accumulation does not introduce significant changes in the axial forces of the liner, irrespective of the flexibility of the tunnel, compared to those obtained from undrained loading without pore pressure accumulation.</div><div>The drainage loading condition (drained or undrained) or the magnitude of the free-field excess pore pressures during undrained loading do not affect the normalized bending moments for flexible tunnels, with F ≥ 2. For stiffer tunnels, with F < 2, the normalized bending moments increase from drained to undrained loading, and with the free field excess pore pressures.</div></div><div><br></div><div><div>It is found that the tunnel’s response is determined by the load on the liner, or by the distortions of the cross section, depending on the flexibility ratio. For stiff structures, with F ≤ 2.0, important axial forces and bending moments are produced in the structure, with larger magnitudes for the undrained case; while the distortions of the cross section are very small. When the tunnel becomes more flexible, the loading on the liner decreases, but the distortions of the cross section start to be important. For flexible structures with initial F ≥ 10 (for the cases investigated), the performance is largely determined by the distortions of the cross section, while the axial forces and bending moments are almost negligible. Such distortions are drastically affected by the drainage loading condition and by the magnitude of pore pressures in the free field. </div></div><div><br></div>
|
Page generated in 0.4095 seconds