This work investigated the synthesis, characterisation and properties of known and novel scandium carboxylate Metal-organic Frameworks (MOFs). The first part reports the performance of these Sc-MOFs as Lewis acid catalysts. The porous MOF scandium trimesate MIL-100(Sc) and the scandium terephthalates such as MIL-101(Sc), MIL-88B(Sc) and MIL-68(Sc) (prepared as the Sc-analogue for the first time), and scandium biphenyldicarboxylate MIL-88D(Sc) were prepared and tested as Lewis acid catalysts. Chromium MIL-101 and MIL-100 and scandium-exchanged zeolites were prepared for comparison. Moreover, successful encapsulation of the phosphotungstate polyoxometalates (POMs) in the cavities of MIL-101(Sc) enhanced the stability of this material. These scandium and chromium MOFs, POM-MOF composites and scandium-exchanged zeolite were tested as heterogeneous catalysts in the carbonyl ene reaction between α-methyl styrene and ethyl trifluoropyruvate. This showed that MIL-100(Sc) was the best catalyst for this reaction, achieving a conversion of 99% to the desired product. The stabilized MIL-101(Sc) was also very active, but less selective for this reaction. Acetalisation of acetaldehyde was also studied, and in this reaction the isoreticular MOFs MIL-88(B) and MIL-88D(Sc) were the most active and selective catalysts. For this reaction, the activity of MIL-100(Sc) was low, which was attributed to reduce pore size and blockage. Functionalisation of the range of scandium terephthalates such as MIL-101(Sc), MIL-88B(Sc), MIL-68(Sc), Sc₂BDC₃,and MIL-53(Sc) particularly with –NH₂ groups, made up the second main part of this research. Solvothermal synthesis were performed at lower temperatures and using mixed solvents to synthesize these amino-terephthalate MOFs, often for the first time, and their adsorption properties were studied, particularly for the adsorption of CO₂. The synthesis of pure Sc₂(NH₂-BDC)₃ and Sc₂(Br-BDC)₃ was achieved for first time by a solvothermal route, lower temperatures, and mixed solvents. This approach yielded large crystals suitable for single crystal diffraction and microcrystal IR spectroscopy. Post-synthetic modification (PSM) of Sc₂(NH₂-BDC)₃ was explored by incorporation of NO₂-groups into the framework by solvent-assisted ligand exchange. The adsorption properties of functionalised and post-modified materials were compared with those of Sc₂BDC₃ and Sc₂(NO₂-BDC)₃ for methanol and hydrocarbons This study demonstrated that Sc₂BDC₃ and Sc₂(NH₂-BDC)₃ give the higher uptakes while the –Br and –NO₂ forms display shape selectivity for n-alkanes over iso-alkanes. Amino-functionalised MIL-53(Sc) was prepared for the first time using a mixed ligand approach, so that 10-20% of a second functionalised terephthalate ligand (NO₂, Br, -(OH)₂) was required for successful single phase synthesis in addition to amino-terephthalic acid. The materials were characterised using PXRD, TGA and gas adsorption, which confirms the samples show a range of behaviour for CO₂ adsorption. Notably, the `breathing´ behaviour is strongly dependent on the type of functionalisation. Finally, the exploratory synthesis of novel scandium MOFs, using isophthalic acid (IA) and its amino and nitro- derivatives, 2,5-furandicarboxylate (FDA) and the porphyrin tetra(carboxyphenyl)porphyrin (TCPP) as linkers was carried out and six novel materials were synthesized, three of which gave crystals large enough for their structure to be determined by single crystal diffraction. Further characterisation was carried out by PXRD, TGA and solid-state NMR. Some of these materials have been shown to be porous to CO₂ and N₂.

The research presented in this thesis aims to determine the effectiveness of the uptake of toxic gases by several MOFs for future use in gas-mask cartridges, and to attempt to compensate for any deficiencies they show in “real-world” conditions. The main findings of this thesis confirm that MOFs are suitable candidates for the use in respirator cartridge materials and provide high capacity for adsorption of toxic gases like ammonia and STAM-1 in particular showed an impressive improvement in humid conditions, which normally decrease the performance of MOFs made from the same materials, such as HKUST-1. STAM-1's improved performance in humid conditions is attributed to the structural shift it displays upon dehydration and rehydration and this was shown to be the case in a structural analogue, CuEtOip, which was synthesised in the author's research group. This analogue was analysed using a combination of single crystal XRD and solid state MAS-NMR, both of which showed the structural change occurring and displays similar gas sorption behaviours, suggesting that this mechanism is the source of STAM-1's improved performance in humid conditions. This thesis also examines the “Armoured MOF” process and investigates the transferability of the process of deposition of mesoporous silica onto MOFs with vastly different properties and synthetic methods compared to those published in the original publication. Alongside this, attempts to protect MOFs using mesoporous silicates were investigated for their viability.

No description available.

L'endommagement des matériaux ductiles est un processus impliquant trois étapes : la nucléation, la croissance et la coalescence de vides. La phase de croissance des vides a été largement étudiée dans la littérature. Il a été montré que, durant cette étape, la forme des vides joue un rôle fondamental sur le comportement macroscopique du matériau. Dans le cas de sollicitations dynamiques, les effets micro inertiels, qui résultent des accélérations subies par la matrice au voisinage du vide, influent eux aussi fortement sur la croissance des vides. Cependant, les travaux intégrant simultanément ces deux contributions (effets inertiels et forme) sont très rares. L'objectif de ce travail est de proposer un modèle de comportement pour les matériaux poreux qui prend en compte la forme des vides et les effets micro inertiels. Dans une première partie, un volume élémentaire représentatif défini par deux ellipsoïdes allongés confocaux est utilisé pour représenter le matériau poreux. La matrice est rigide viscoplastique. En se basant sur les travaux de Molinari et Mercier (2001), la contrainte macroscopique se décompose en une partie statique et une partie dynamique. La contrainte statique est décrite par le modèle de Gologanu et al. (1997). La contrainte dynamique est obtenue en adoptant le champ de vitesse de Gologanu et al. (1993). Avec cette modélisation, il est montré que la contrainte dynamique est liée de façon quadratique au tenseur des vitesses des déformations et de façon linéaire à sa dérivée par rapport au temps. Le modèle fait l'objet d'une validation sur la base de comparaisons avec des résultats de calculs par éléments finis. Différentes forme de vides et valeurs de la porosité ont été considérées. Dans une seconde partie, le cas de matériaux contenant des vides aplatis est abordé ; le volume élémentaire représentatif est défini par deux ellipsoïdes confocaux aplatis. La contrainte statique est toujours décrite par le modèle de Gologanu et al. (1997). La contrainte dynamique est obtenue en adoptant le champ de vitesse de Gologanu et al. (1994). La procédure de validation est identique à celle mise en œuvre dans le cas des vides allongés. Une bonne adéquation entre les résultats du modèle et les résultats de calculs par éléments finis est retrouvée. L'utilisation des surfaces d'écoulement permet de mettre en lumière les effets de la forme des vides sur le comportement du matériau poreux sous chargement dynamique. En fonction du chargement appliqué, certaines géométries de vide favorisent la déformation du matériau. Le cas particulier du vide sphérique est étudié comme limite des deux modèles. La continuité des deux modèles est démontrée. L'évolution de la porosité et de la forme des vides dans un matériau poreux sous chargement dynamique est analysée. Des comparaisons avec des résultats de simulations par éléments finis sont proposées. L'influence de la triaxialité et de la vitesse du chargement sur le comportement dynamique du matériau poreux est étudiée, ainsi que celle de la forme initiale du vide. Au final, il est démontré que le modèle développé dans cette thèse permet de retrouver les tendances fournies par les calculs éléments finis / The ductile fracture mechanism involves three stages: void nucleation, void growth and void coalescence. Under dynamic loading conditions, void growth is strongly affected by microinertia effects resulting from the local acceleration of the matrix material in the vicinity of the void. Several works devoted to quasi-static conditions also show that void shape has a strong impact on the behavior of porous ductile materials. However, there exist only few works considering the combined effect of these two contributions. In the present work, we propose an original, multi-scale constitutive model of porous materials, taking into account void shape and micro-inertia effects. In a first step, a representative volume element defined by two confocal prolate spheroids is used to represent the porous material. The matrix behavior is assumed to be rigid-viscoplastic. Based on the work of Molinari and Mercier (2001), the macroscopic stress is the sum of a static and a dynamic part. The static contribution is described by the Gologanu et al. model (1997). The dynamic stress is derived by choosing the trial velocity field proposed by Gologanu et al. (1993). With the present modeling, a link is established between the macroscopic dynamic stress, on the one hand and, the macroscopic strain rate tensor and its time derivative on the other hand. To validate the proposed model, finite element computations have been performed for different void geometries and void volume fractions. The influence of micro-inertia on the macroscopic flow surface is analyzed and a good agreement between modeling and simulations is observed. In a second step, a representative volume element defined by two confocal oblate spheroids is used to represent the porous material. For this configuration, the static contribution is also described by using the Gologanu et al. model (1997), while the derivation of the dynamic stress is based on the trial velocity field proposed by Gologanu et al. (1994). As for the prolate case, a good agreement is retrieved between model predictions and results of finite element computations. The spherical void configuration is investigated as the limit case for the oblate and prolate models. The continuity between the two models is established. Finally, the proposed models are combined to investigate the porosity and void shape evolutions in a porous solid under dynamic loadings. A parametric study has been performed by varying the stress triaxiality, the initial void shape and the loading rate. Significant void shape variations are observed for low triaxiality loadings. With the present modeling, the void can evolve from prolate to oblate shapes (and the reverse). Model predictions are compared to finite element computations

Tesis por compendio / [ES] El Proyecto de investigación aquí descrito se estructura en dos partes. La primera parte se centra en la investigación fundamental con el objetivo de crear un protocolo para la síntesis de zeolitas. La segunda parte se refiere al diseño, síntesis y caracterización de nuevas zeolitas, particularmente utiles para aplicaciones DeNOx,, pero también podría ser útil para aplicaciones MTO. La investigación fundamental sugiere un Nuevo modelo de preparación de zeolitas utilizando otras zeolitas como simiente. Este proceso se llama transformación zeolita-zeolita o también conversión interzeolita. El alto rendimiento obtenido, la rápida cristalización y la mejor utilización y rendimiento de los materiales de partida se han tenido en cuenta para mejorar el proceso en base a un proyecto de doctorado financiado por una empresa. Este método se ha ilustrado utilizando varias zeolitas como semilla, entre otras FAU y CHA, para la preparación de las dos zeolitas objetivo: AEI y AFX. En la segunda parte, la investigación se centra en el diseño de nuevas zeolitas de poro medio. Se han seleccionado tres zeolitas hipotéticas de una base de datos de 933611 estructuras. Esta selección se ha realizado utilizando descriptores específicamente diseñados en base a la aplicabilidad de estas zeolitas en procesos DeNOx zeolitas. A continuación se han buscado los agentes directores de estructura (ADE) más apropiados, con la ayuda de métodos computacionales, algunos de los cuales se han sintetizado posteriormente. El uso de dichos ADE en el gel de síntesis ha permitido la obtención de una zeolita cuya topología (ERI) ha sido identificada mediante análisis por PXRD, y cuya morfología y tamaño de cristal (particularmente pequeño) la hacen muy adecuada para su uso como catalizador en algunos procesos. El trabajo de síntesis también reveló la aparición de una nueva zeolita de alta densidad, llamada 'paracelsio-K'. Este nuevo material se ha obtenido al explorar el espacio de fases que cristalizan al utilizar 1-methyl-DABCO como ADE. La síntesis de esta zeolita tiene un especial interés porque el ADE no se incorpora en los canales de la zeolita, pero más bien influyendo en la nucleación y cristalización. La caracterización reveló que la composición del material es próxima al mineral microcline, estructuralmente cercano al paracelsio, ambos feldespatos. A diferencia de los feldespatos el paracelsio-K contiene moléculas de agua en su interior (1 molécula por cavidad) y puede describirse como el material más simple de la familia de las zeolitas que contiene cadenas del tipo 'doble-cigüeñal'. Utilizando los elementos topológicos correspondientes a esta estructura es posible generar estructuras zeolíticas ya conocidas, como GIS, APC, MER, PHI, SIV y algunas otras zeolitas hipotéticas. / [CA] El Projecte d'investigació aquí descrit s'estructura en dos parts. La primera part se centra en la investigació fonamental amb l'objectiu de crear un protocol per a la síntesis de zeolites. La segona part es refereix al disseny, síntesis i caracterització de noves zeolites, particularment útils per a aplicacions DeNOx , però també podria ser útil per a aplicacions MTO. La investigació fonamental suggereix un nou model de preparació de zeolites utilitzant altres zeolites com a llavor. Aquest procés s'anomena transformació zeolita-zeolita o també conversió interzeolita. L'alt rendiment obtingut, la ràpida cristal·lització i la millor utilització i rendiment dels materials de partida s'han tingut en compte per millorar el procés en base a un projecte de doctorat finançat per una empresa. Aquest mètode s'ha il·lustrat utilitzant diverses zeolites com a llavor, entre altres FAU i CHA, per a la preparació de les dues zeolites objectiu: AEI i AFX. A la segona part, la investigació se centra en el disseny de noves zeolites de porus mitjà. S'han seleccionat tres zeolites hipotètiques d'una base de dades de 933.611 estructures. Aquesta selecció s'ha realitzat utilitzant descriptors específicament dissenyats sobre la base de l'aplicabilitat d'aquestes zeolites en processos DeNOx zeolites. A continuació s'han buscat els agents directors d'estructura (ADE) més apropiats, amb l'ajuda de mètodes computacionals, alguns dels quals s'han sintetitzat posteriorment. L'ús d'aquests ADE al gel de síntesi ha permès l'obtenció d'una zeolita la topologia (ERI) ha estat identificada mitjançant anàlisi per PXRD, i la morfologia i mida de vidre (particularment petit) la fan molt adequada per al seu ús com a catalitzador en alguns processos. El treball de síntesi també va revelar l'aparició d'una nova zeolita d'alta densitat, anomenada 'paracelsio-K'. Aquest nou material s'ha obtingut a explorar l'espai de fases que cristal·litzen en utilitzar 1-methyl-DABCO com ADE. La síntesi d'aquesta zeolita té un especial interès perquè el ADE no s'incorpora en els canals de la zeolita, però més aviat influint en la nucleació i cristal·lització. La caracterització va revelar que la composició del material és propera al mineral microcline, estructuralment proper al paracelsio, tots dos feldspats. A diferència dels feldspats el paracelsio-K conté molècules d'aigua al seu interior (1 molècula per cavitat) i pot descriure com el material més simple de la família de les zeolites que conté cadenes del tipus 'doble-cigonyal'. Utilitzant els elements topològics corresponents a aquesta estructura és possible generar estructures zeolítiques ja conegudes, com GIS, APC, MER, PHI, SIV i algunes altres zeolites hipotètiques. / [EN] The research project described herein is structured in two parts. The first part is focused on the fundamental research with the aim of creating a toolbox for zeolite preparation. The second part deal with the design, synthesis and characterization of novel zeolites particular useful for DeNOx applications, but could be also useful for MTO applications. The fundamental research is addressing a novel approach of preparing zeolites by using other zeolites as raw materials. This process is known as zeolite-to-zeolite transformation or interzeolite conversion. The high yield obtained, fast crystallization time and the better utilization of the raw materials (e.g. parent zeolite, organic structure directing agent (OSDA)), are important benefits of interzeolite conversion technic, which answer the objectives formulated for an industrial PhD project. The method has been exemplified by using various raw materials as parent zeolites, such as FAU and CHA for the preparation of two target small pore zeolites AEI and AFX. In the second part the focus has been on the design of novel small pore zeolites. Three hypothetical frameworks have been selected by narrowing down a database containing 933611 structures. The selection has been performed by using the general descriptors for the state-of-the-art DeNOx zeolites (e.g. CHA). This was followed by finding suitable OSDAs for the selected frameworks, by using computational methods. The usage of the theoretically predicted OSDAs in synthesis gels made possible the synthesis of a novel high-silica zeolite. PXRD analysis, revealed that the zeolite has the ERI framework topology. The obtained material has a distinct particle morphology and smaller crystallites, which are key parameters for various catalytic processes. The synthesis work revealed also a novel dense zeolite, named K-paracelsian. The new material has been obtained while exploring the phase space using 1-methyl-DABCO as OSDA. The synthesis of this zeolite is especially interesting in the sense that the OSDA is not being incorporated into the zeolite channels, but rather influencing the nucleation and crystallization. Further characterization revealed a material compositionally closely related to the mineral microcline and structurally closely related to the mineral paracelsian, both of which are feldspars. In contrast to the feldspars, K-paracelsian contains intrazeolitic water corresponding to one molecule per cage and can be described as the simplest endmember of a family of dense double-crankshaft zeolite topologies. By applying the identified building principle, a number of known zeolite frameworks (e.g. GIS, APC, MER, PHI, SIV) and hypothetical zeolite topologies can be constructed. / The authors thank Haldor Topsoe A/S and Innovation Fund Denmark for financial support under the Industrial PhD programme (Case no. 1355-0174B). We thank MINECO of Spain for funding (SEV-2016- 0683 and RTI2018-101033-B-100) and ASIC-UPV for the use of computational facilities. We also thank Prof. M. M. J. Treacy for assistance with the Database of Prospective Zeolite Structures. / Boruntea, C. (2020). Design, synthesis and characterization of small-pore zeolites for industrial environmental applications [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/141094 / TESIS / Compendio

Recently, we have described the synthesis of chiral metal–organic frameworks iPr-ChirUMCM-1 and Bn-ChirUMCM-1 and their use in enantioselective separation. Here, we demonstrate for the first time the use of a chiral solvating agent (1-phenyl-2,2,2-trifluoroethanol, TFPE) for chiral recognition in iPr-ChirUMCM-1 and Bn-ChirUMCM-1 by means of solid-state13C NMR spectroscopy. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Recently, we have described the synthesis of chiral metal–organic frameworks iPr-ChirUMCM-1 and Bn-ChirUMCM-1 and their use in enantioselective separation. Here, we demonstrate for the first time the use of a chiral solvating agent (1-phenyl-2,2,2-trifluoroethanol, TFPE) for chiral recognition in iPr-ChirUMCM-1 and Bn-ChirUMCM-1 by means of solid-state13C NMR spectroscopy. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.