Spelling suggestions: "subject:"preamble sampling"" "subject:"preambles sampling""
1 |
A low power listening with wake up after transmissions MAC protocol for WSNsCano Bastidas, Cristina 04 March 2011 (has links)
In the last few years Wireless Sensor Networks (WSNs) have become an interesting field of research mainly due to the challenges and constraints of their design and the broad range of potential applications they can provide. One of the most important constraints is the limited energy resources of the sensor nodes that directly influences the design of the Medium Access Control (MAC) layer, as it is the responsible of controlling the transceiver that is the most consuming component of a sensor node. In this thesis the limitations of preamble sampling, one of the most well-known MAC protocols for WSNs, have been studied. Moreover, a new approach, called Low power listening with Wake up after Transmissions MAC (LWT-MAC), has been designed with the goal to overcome preamble sampling limitations while maintaining its reduced energy consumption and simplicity. The performance results obtained have shown that the LWT-MAC protocol is able to significantly improve the performance of WSNs. / Les xarxes de sensors sense fils han esdevingut una interessant àrea de recerca degut als reptes que presenta el seu disseny i a la gran quantitat d’aplicacions potencials que poden proporcionar. Un dels principals problemes d’aquestes xarxes és la limitació en els recursos energètics dels nodes sensors, cosa que afecta directament al disseny del nivell Medium Access Control (MAC), degut a què és el responsable de controlar la ràdio, el component de major consum energètic d’un node sensor. En aquesta tesi s’estudien les limitacions d'un dels protocols MAC per xarxes de sensors més conegut: preamble sampling. A més, s’ha dissenyat un nou protocol, anomenat Low power listening with Wake up after Transmissions MAC (LWT-MAC), amb l’objectiu de reduir les limitacions de preamble sampling però mantenint el seu baix consum energètic i la seva simplicitat. Els resultats obtinguts mostren que el protocol LWT-MAC és capaç de millorar de forma significativa el rendiment de la xarxa.
|
2 |
Energy-efficient MAC protocol for wireless sensor networksTonsing, Christoph Erik 04 September 2008 (has links)
A Wireless Sensor Network (WSN) is a collection of tiny devices called sensor nodes which are deployed in an area to be monitored. Each node has one or more sensors with which they can measure the characteristics of their surroundings. In a typical WSN, the data gathered by each node is sent wirelessly through the network from one node to the next towards a central base station. Each node typically has a very limited energy supply. Therefore, in order for WSNs to have acceptable lifetimes, energy efficiency is a design goal that is of utmost importance and must be kept in mind at all levels of a WSN system. The main consumer of energy on a node is the wireless transceiver and therefore, the communications that occur between nodes should be carefully controlled so as not to waste energy. The Medium Access Control (MAC) protocol is directly in charge of managing the transceiver of a node. It determines when the transceiver is on/off and synchronizes the data exchanges among neighbouring nodes so as to prevent collisions etc., enabling useful communications to occur. The MAC protocol thus has a big impact on the overall energy efficiency of a node. Many WSN MAC protocols have been proposed in the literature but it was found that most were not optimized for the group of WSNs displaying very low volumes of traffic in the network. In low traffic WSNs, a major problem faced in the communications process is clock drift, which causes nodes to become unsynchronized. The MAC protocol must overcome this and other problems while expending as little energy as possible. Many useful WSN applications show low traffic characteristics and thus a new MAC protocol was developed which is aimed at this category of WSNs. The new protocol, Dynamic Preamble Sampling MAC (DPS-MAC) builds on the family of preamble sampling protocols which were found to be most suitable for low traffic WSNs. In contrast to the most energy efficient existing preamble sampling protocols, DPS-MAC does not cater for the worst case clock drift that can occur between two nodes. Rather, it dynamically learns the actual clock drift experienced between any two nodes and then adjusts its operation accordingly. By simulation it was shown that DPS-MAC requires less protocol overhead during the communication process and thus performs more energy efficiently than its predecessors under various network operating conditions. Furthermore, DPS-MAC is less prone to become overloaded or unstable in conditions of high traffic load and high contention levels respectively. These improvements cause the use of DPS-MAC to lead to longer node and network lifetimes, thus making low traffic WSNs more feasible. / Dissertation (MEng)--University of Pretoria, 2008. / Electrical, Electronic and Computer Engineering / MEng / Unrestricted
|
3 |
Relais coopératifs dans un réseau de capteurs : performances limites et stratégies / Cooperative Relaying in sensor network : performances, limits and startegiesBen Nacef, Ahmed 24 November 2011 (has links)
Les réseaux de capteurs ont connu un grand essor ces dix dernières années. Ils interviennent dans tous les domaines de notre vie quotidienne et la rendent plus aisée. Malgré ce grand succès des réseaux de capteurs, plusieurs problèmes restent encore ouverts. La capacité énergétique et la fragilité du canal radio des réseaux de capteurs affectent gravement leurs performances. La communication coopérative représente une solution efficace pour lutter contre l'instabilité du canal radio et afin d'économiser plus d'énergie. Nous proposons dans ce manuscrit, d'utiliser la communication coopérative, en premier lieu, au niveau de la couche MAC afin de mettre en place un accès au canal coopératif et non égoïste. En second lieu, nous utilisons la communication coopérative au niveau de la couche réseau dans le but d'établir des chemins de routage plus stables et plus robustes. / Wireless sensor networks (WSN) have known a great development during the last decade. They intervene in all the domain of our everyday life to make it easier. Despite the success of WSN several problems have to be solved. The restricted energy capacity and the randomness of the wireless channel seriously affect the performances of the WSN. Cooperative communication represents an efficient solution to reduce the instability of the wireless channel and to optimize energy. In this thesis we propose to use cooperative communications at the MAC and network layer in order to set up a cooperative access to the channel and to establish more robust routing paths.
|
4 |
A cross-layer approach for optimizing the efficiency of wireless sensor and actor networksKohlmeyer, Eckhard Bernhard 25 June 2009 (has links)
Recent development has lead to the emergence of distributed Wireless Sensor and Actor Networks (WSAN), which are capable of observing the physical environment, processing the data, making decisions based on the observations and performing appropriate actions. WSANs represent an important extension of Wireless Sensor Networks (WSNs) and may comprise a large number of sensor nodes and a smaller number of actor nodes. The sensor nodes are low-cost, low energy, battery powered devices with restricted sensing, computational and wireless communication capabilities. Actor nodes are resource richer with superior processing capabilities, higher transmission powers and a longer battery life. A basic operational scenario of a typical WSAN application follows the following sequence of events. The physical environment is periodically sensed and evaluated by the sensor nodes. The sensed data is then routed towards an actor node. Upon receiving sensed data, an actor node performs an action upon the physical environment if necessary, i.e. if the occurrence of a disturbance or critical event has been detected. The specific characteristics of sensor and actor nodes combined with some stringent application constraints impose unique requirements for WSANs. The fundamental challenges for WSANs are to achieve low latency, high energy efficiency and high reliability. The latency and energy efficiency requirements are in a trade-off relationship. The communication and coordination inside WSANs is managed via a Communication Protocol Stack (CPS) situated on every node. The requirements of low latency and energy efficiency have to be addressed at every layer of the CPS to ensure overall feasibility of the WSAN. Therefore, careful design of protocol layers in the CPS is crucial in attempting to meet the unique requirements and handle the abovementioned trade-off relationship in WSANs. The traditional CPS, comprising the application, network, medium access control and physical layer, is a layered protocol stack with every layer, a predefined functional entity. However, it has been found that for similar types of networks with similar stringent network requirements, the strictly layered protocol stack approach performs at a sub-optimal level with regards to network efficiency. A modern cross-layer paradigm, which proposes the employment of interactions between layers in the CPS, has recently attracted a lot of attention. The cross-layer approach promotes network efficiency optimization and promises considerable performance gains. It is found that in literature, the adoption of this cross-layer paradigm has not yet been considered for WSANs. In this dissertation, a complete cross-layer enabled WSAN CPS is developed that features the adoption of the cross-layer paradigm towards promoting optimization of the network efficiency. The newly proposed cross-layer enabled CPS entails protocols that incorporate information from other layers into their local decisions. Every protocol layer provides information identified as beneficial to another layer(s) in the CPS via a newly proposed Simple Cross-Layer Framework (SCLF) for WSANs. The proposed complete cross-layer enabled WSAN CPS comprises a Cross-Layer enabled Network-Centric Actuation Control with Data Prioritization (CL-NCAC-DP) application layer (APPL) protocol, a Cross-Layer enabled Cluster-based Hierarchical Energy/Latency-Aware Geographic Routing (CL-CHELAGR) network layer (NETL) protocol and a Cross-Layer enabled Carrier Sense Multiple Access with Minimum Preamble Sampling and Duty Cycle Doubling (CL-CSMA-MPS-DCD) medium access control layer (MACL) protocol. Each of these protocols builds on an existing simple layered protocol that was chosen as a basis for development of the cross-layer enabled protocols. It was found that existing protocols focus primarily on energy efficiency to ensure maximum network lifetime. However, most WSAN applications require latency minimization to be considered with the same importance. The cross-layer paradigm provides means of facilitating the optimization of both latency and energy efficiency. Specifically, a solution to the latency versus energy trade-off is given in this dissertation. The data generated by sensor nodes is prioritised by the APPL and depending on the delay-sensitivity, handled in a specialised manor by every layer of the CPS. Delay-sensitive data packets are handled in order to achieve minimum latency. On the other hand, delay-insensitive non critical data packets are handled in such a way as to achieve the highest energy efficiency. In effect, either latency minimization or energy efficiency receives an elevated precedence according to the type of data that is to be handled. Specifically, the cross-layer enabled APPL protocol provides information pertaining to the delay-sensitivity of sensed data packets to the other layers. Consequently, when a data packet is detected as highly delay-sensitive, the cross-layer enabled NETL protocol changes its approach from energy efficient routing along the maximum residual energy path to routing along the fastest path towards the cluster-head actor node for latency minimizing of the specific packet. This is done by considering information (contained in the SCLF neighbourhood table) from the MACL that entails wakeup schedules and channel utilization at neighbour nodes. Among the added criteria, the next-hop node is primarily chosen based on the shortest time to wakeup. The cross-layer enabled MACL in turn employs a priority queue and a temporary duty cycle doubling feature to enable rapid relaying of delay-sensitive data. Duty cycle doubling is employed whenever a sensor node’s APPL state indicates that it is part of a critical event reporting route. When the APPL protocol state (found in the SCLF information pool) indicates that the node is not part of the critical event reporting route anymore, the MACL reverts back to promoting energy efficiency by disengaging duty cycle doubling and re-employing a combination of a very low duty cycle and preamble sampling. The APPL protocol conversely considers the current queue size of the MACL and temporarily halts the creation of data packets (only if the sensed value is non critical) to prevent a queue overflow and ease congestion at the MACL By simulation it was shown that the cross-layer enabled WSAN CPS consistently outperforms the layered CPS for various network conditions. The average end-to-end latency of delay-sensitive critical data packets is decreased substantially. Furthermore, the average end-to-end latency of delay-insensitive data packets is also decreased. Finally, the energy efficiency performance is decreased by a tolerable insignificant minor margin as expected. The trivial increase in energy consumption is overshadowed by the high margin of increase in latency performance for delay-sensitive critical data packets. The newly proposed cross-layer CPS achieves an immense latency performance increase for WSANs, while maintaining excellent energy efficiency. It has hence been shown that the adoption of the cross-layer paradigm by the WSAN CPS proves hugely beneficial with regards to the network efficiency performance. This increases the feasibility of WSANs and promotes its application in more areas. / Dissertation (MEng)--University of Pretoria, 2009. / Electrical, Electronic and Computer Engineering / unrestricted
|
Page generated in 0.0489 seconds