International Telemetering Conference Proceedings / October 26-29, 1998 / Town & Country Resort Hotel and Convention Center, San Diego, California / High explosive radio telemetry (HERT) is a project that is being developed jointly by Los Alamos National Laboratory and AlliedSignal FM&T. The ultimate goal is to develop a small, modular telemetry system capable of high-speed detection of explosive events, with an accuracy on the order of 10 nanoseconds. The reliable telemetry of this data, from a high-speed missile trajectory, is a very challenging opportunity. All captured data must be transmitted in less than 20 microseconds of time duration. This requires a high bits/Hertz microwave telemetry modulation code to insure transmission of the data within the limited time interval available.

In order to meet the ever-growing demand for mobile data, a number of different technologies have been adopted by the fourth generation standardization bodies. These include multiple access schemes such as spatial division multiple access (SDMA), and efficient modulation techniques such as orthogonal frequency division multiplexing (OFDM)-based modulation. The specific objectives of this theses are to develop an effective feedback method for interference management in smart antenna SDMA systems and to design an efficient OFDM-based modulation technique, where an additional dimension is added to the conventional two-dimensional modulation techniques such as quadrature amplitude modulation (QAM). In SDMA time division duplex (TDD) systems, where channel reciprocity is maintained, uplink (UL) channel sounding method is considered as one of the most promising feedback methods due to its bandwidth and delay efficiency. Conventional channel sounding (CCS) only conveys the channel state information (CSI) of each active user to the base station (BS). Due to the limitation in system performance because of co-channel interference (CCI) from adjacent cells in interference-limited scenarios, CSI is only a suboptimal metric for multiuser spatial multiplexing optimization. The first major contribution of this theses is a novel interference feedback method proposed to provide the BS with implicit knowledge about the interference level received by each mobile station (MS). More specifically, it is proposed to weight the conventional channel sounding pilots by the level of the experienced interference at the user’s side. Interference-weighted channel sounding (IWCS) acts as a spectrally efficient feedback technique that provides the BS with implicit knowledge about CCI experienced by each MS, and significantly improves the downlink (DL) sum capacity for both greedy and fair scheduling policies. For the sake of completeness, a novel procedure is developed to make the IWCS pilots usable for UL optimization. It is proposed to divide the optimization metric obtained from the IWCS pilots by the interference experienced at the BS’s antennas. The resultant new metric, the channel gain divided by the multiplication of DL and UL interference, provides link-protection awareness and is used to optimize both UL and DL. Using maximum capacity scheduling criterion, the link-protection aware metric results in a gain in the median system sum capacity of 26.7% and 12.5% in DL and UL respectively compared to the case when conventional channel sounding techniques are used. Moreover, heuristic algorithm has been proposed in order to facilitate a practical optimization and to reduce the computational complexity. The second major contribution of this theses is an innovative transmission approach, referred to as subcarrier-index modulation (SIM), which is proposed to be integrated with OFDM. The key idea of SIM is to employ the subcarrier-index to convey information to the receiver. Furthermore, a closed-form analytical bit error ratio (BER) of SIM OFDM in Rayleigh channel is derived. Simulation results show BER performance gain of 4 dB over 4-QAM OFDM for both coded and uncoded data without power saving policy. Alternatively, power saving policy maintains an average gain of 1 dB while only using half OFDM symbol transmit power.

Approved for public release; distribution is unlimited. / Trellis-Coded Modulation (TCM) is employed with quadrature amplitude modulation (QAM) to provide error correction coding with no expense in bandwidth. There are two common implementations of TCM, namely pragmatic TCM and Ungerboeck TCM. Both schemes employ Viterbi algorithms for decoding but have different code construction. This thesis investigates and compares the performance of pragmatic TCM and Ungerboeck TCM by implementing the Viterbi decoding algorithm for both schemes with 16-QAM and 64-QAM. Both pragmatic and Ungerboeck TCM with six memory elements are considered. Simulations were carried out for both pragmatic and Ungerboeck TCM to evaluate their respective performance. The simulations were done using Matlab software, and an additive white Gaussian noise channel was assumed. The objective was to ascertain that pragmatic TCM, with its reduced-complexity decoding, is more suitable to adaptive modulation than Ungerboeck TCM. / Civilian

An experimental investigation of an M level (M = 16, 64 and 256) Quadrature Amplitude Modulation (QAM) transmission system suitable for video transmission is presented. The communication system is based on layered video coding and unequal error protection to make the video bitstream robust to channel errors. An implementation is described in which H.264 video is protected unequally by partitioning the compressed data into two layers of different visual importance. The partition scheme is based on a separation of the group of pictures (GoP) in the intra-coded frame (I-frame) and predictive coded frame (P frame). This partition scheme is then applied to split the H.264-coded video bitstream and is suitable for Constant Bit Rate (CBR) transmission. Unequal error protection is based on uniform and non-uniform M-QAM constellations in conjunction with different scenarios of splitting the transmitted symbol for protection of the more important information of the video data; different constellation arrangements are proposed and evaluated to increase the capacity of the high priority layer. The performance of the transmission system is evaluated under Additive White Gaussian Noise (AWGN) and Rayleigh fading conditions. Simulation results showed that in noisy channels the decoded video can be improved by assigning a larger portion of the video data to the enhancement layer in conjunction with non-uniform constellation arrangements; in better channel conditions the quality of the received video can be improved by assigning more bits in the high priority channel and using uniform constellations. The aforementioned varying conditions can make the video transmission more successful over error-prone channels. Further techniques were developed to combat various channel impairments by considering channel coding methods suitable for layered video coding applications. It is shown that a combination of non-uniform M-QAM and forward error correction (FEC) will yield a better performance. Additionally, antenna diversity techniques are examined and introduced to the transmission system that can offer a significant improvement in the quality of service of mobile video communication systems in environments that can be modelled by a Rayleigh fading channel.

An experimental investigation of an M level (M = 16, 64 and 256) Quadrature Amplitude Modulation (QAM) transmission system suitable for video transmission is presented. The communication system is based on layered video coding and unequal error protection to make the video bitstream robust to channel errors. An implementation is described in which H.264 video is protected unequally by partitioning the compressed data into two layers of different visual importance. The partition scheme is based on a separation of the group of pictures (GoP) in the intra-coded frame (I-frame) and predictive coded frame (P frame). This partition scheme is then applied to split the H.264-coded video bitstream and is suitable for Constant Bit Rate (CBR) transmission. Unequal error protection is based on uniform and non-uniform M-QAM constellations in conjunction with different scenarios of splitting the transmitted symbol for protection of the more important information of the video data; different constellation arrangements are proposed and evaluated to increase the capacity of the high priority layer. The performance of the transmission system is evaluated under Additive White Gaussian Noise (AWGN) and Rayleigh fading conditions. Simulation results showed that in noisy channels the decoded video can be improved by assigning a larger portion of the video data to the enhancement layer in conjunction with non-uniform constellation arrangements; in better channel conditions the quality of the received video can be improved by assigning more bits in the high priority channel and using uniform constellations. The aforementioned varying conditions can make the video transmission more successful over error-prone channels. Further techniques were developed to combat various channel impairments by considering channel coding methods suitable for layered video coding applications. It is shown that a combination of non-uniform M-QAM and forward error correction (FEC) will yield a better performance. Additionally, antenna diversity techniques are examined and introduced to the transmission system that can offer a significant improvement in the quality of service of mobile video communication systems in environments that can be modelled by a Rayleigh fading channel.