In SLCCA , the location and magnitude of significant coefficients are specified by the so-called significance map and magnitude respectively . As we know significance map is susceptible , error will propagate when data was deteriorated . This paper address this critical problem and provide an novel approach . In the significance map , the importance of data is interlaced . And our approach is to re-organize the significant map according to encoded symbol¡¦s characteristic . In SLCCA , four symbols are used to encode : POS , NEG , ZERO , LINK . POS or NEG represents the sign of a significant coefficient . ZERO represents an insignificant coefficient . LINK marks the presence of a significance-link . Symbol LINK is more important than POS NEG ZERO . Because when error happen in symbol LINK , it will lead to propagation error . Re-organized data is protected by differRS code . More important data are allocated more parity symbols .

ITC/USA 2005 Conference Proceedings / The Forty-First Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2005 / Riviera Hotel & Convention Center, Las Vegas, Nevada / A practical joint source/channel coding algorithm is proposed for the transmission of multiple images and videos to reduce the overall reconstructed source distortion at the receiver within a given total bit rate. It is demonstrated that by joint coding of multiple sources with such an objective, both improved distortion performance as well as reduced quality variation can be achieved at the same time. Experimental results based on multiple images and video sequences justify our conclusion.

Rateless codes, also known as fountain codes, are a class of erasure error-control codes that are particularly well suited for broadcast/multicast systems. Raptor codes, as a particularly successful implementation of digital fountain codes, have been used as the application layer forward error correction (FEC) codes in the third generation partnership program (3GPP) Multimedia Broadcast and Multicast Services (MBMS) standard. However, the application of rateless codes to wireless multimedia broadcast/multicast communications has yet to overcome two major challenges: first, wireless multimedia communications usually has stringent delay requirements. In addition, multimedia multicast has to overcome heterogeneity. To meet these challenges, we propose a rateless code design that takes the layered nature of source traffic as well as the varying quality of transmission channels into account. A convex optimization framework for the application of unequal error protection (UEP) rateless codes to synchronous and asynchronous multimedia multicast to heterogeneous users is proposed. A second thread of the thesis addresses the noisy, bursty and time- varying nature of wireless communication channels that challenge the assumption of erasure channels often used for the wired internet. In order to meet this challenge, the optimal combination of application-layer rateless code and physical layer FEC code rates in time-varying fading channels is investigated. The performance of rateless codes in hybrid error-erasure channels with memory is then studied, and a cross-layer decoding method is proposed to improve decoding performance and complexity. / Thesis (Ph.D, Electrical & Computer Engineering) -- Queen's University, 2011-06-12 16:26:36.136

In this thesis, bit-by-bit power allocation in order to minimize mean-squared error (MSE) distortion of a basic communication system is studied. This communication system consists of a quantizer. There may or may not be a channel encoder and a Binary Phase Shift Keying (BPSK) modulator. In the quantizer, natural binary mapping is made. First, the case where there is no channel coding is considered. In the uncoded case, hard decision decoding is done at the receiver. It is seen that errors that occur in the more significant information bits contribute more to the distortion than less significant bits. For the uncoded case, the optimum power profile for each bit is determined analytically and through computer-based optimization methods like differential evolution. For low signal-to-noise ratio (SNR), the less significant bits are allocated negligible power compared to the more significant bits. For high SNRs, it is seen that the optimum bit-by-bit power allocation gives constant MSE gain in dB over the uniform power allocation. Second, the coded case is considered. Linear block codes like (3,2), (4,3) and (5,4) single parity check codes and (7,4) Hamming codes are used and soft-decision decoding is done at the receiver. Approximate expressions for the MSE are considered in order to find a near-optimum power profile for the coded case. The optimization is done through a computer-based optimization method (differential evolution). For a simple code like (7,4) Hamming code simulations show that up to 3 dB MSE gain can be obtained by changing the power allocation on the information and parity bits. A systematic method to find the power profile for linear block codes is also introduced given the knowledge of input-output weight enumerating function of the code. The information bits have the same power, and parity bits have the same power, and the two power levels can be different.

An experimental investigation of an M level (M = 16, 64 and 256) Quadrature Amplitude Modulation (QAM) transmission system suitable for video transmission is presented. The communication system is based on layered video coding and unequal error protection to make the video bitstream robust to channel errors. An implementation is described in which H.264 video is protected unequally by partitioning the compressed data into two layers of different visual importance. The partition scheme is based on a separation of the group of pictures (GoP) in the intra-coded frame (I-frame) and predictive coded frame (P frame). This partition scheme is then applied to split the H.264-coded video bitstream and is suitable for Constant Bit Rate (CBR) transmission. Unequal error protection is based on uniform and non-uniform M-QAM constellations in conjunction with different scenarios of splitting the transmitted symbol for protection of the more important information of the video data; different constellation arrangements are proposed and evaluated to increase the capacity of the high priority layer. The performance of the transmission system is evaluated under Additive White Gaussian Noise (AWGN) and Rayleigh fading conditions. Simulation results showed that in noisy channels the decoded video can be improved by assigning a larger portion of the video data to the enhancement layer in conjunction with non-uniform constellation arrangements; in better channel conditions the quality of the received video can be improved by assigning more bits in the high priority channel and using uniform constellations. The aforementioned varying conditions can make the video transmission more successful over error-prone channels. Further techniques were developed to combat various channel impairments by considering channel coding methods suitable for layered video coding applications. It is shown that a combination of non-uniform M-QAM and forward error correction (FEC) will yield a better performance. Additionally, antenna diversity techniques are examined and introduced to the transmission system that can offer a significant improvement in the quality of service of mobile video communication systems in environments that can be modelled by a Rayleigh fading channel.

An experimental investigation of an M level (M = 16, 64 and 256) Quadrature Amplitude Modulation (QAM) transmission system suitable for video transmission is presented. The communication system is based on layered video coding and unequal error protection to make the video bitstream robust to channel errors. An implementation is described in which H.264 video is protected unequally by partitioning the compressed data into two layers of different visual importance. The partition scheme is based on a separation of the group of pictures (GoP) in the intra-coded frame (I-frame) and predictive coded frame (P frame). This partition scheme is then applied to split the H.264-coded video bitstream and is suitable for Constant Bit Rate (CBR) transmission. Unequal error protection is based on uniform and non-uniform M-QAM constellations in conjunction with different scenarios of splitting the transmitted symbol for protection of the more important information of the video data; different constellation arrangements are proposed and evaluated to increase the capacity of the high priority layer. The performance of the transmission system is evaluated under Additive White Gaussian Noise (AWGN) and Rayleigh fading conditions. Simulation results showed that in noisy channels the decoded video can be improved by assigning a larger portion of the video data to the enhancement layer in conjunction with non-uniform constellation arrangements; in better channel conditions the quality of the received video can be improved by assigning more bits in the high priority channel and using uniform constellations. The aforementioned varying conditions can make the video transmission more successful over error-prone channels. Further techniques were developed to combat various channel impairments by considering channel coding methods suitable for layered video coding applications. It is shown that a combination of non-uniform M-QAM and forward error correction (FEC) will yield a better performance. Additionally, antenna diversity techniques are examined and introduced to the transmission system that can offer a significant improvement in the quality of service of mobile video communication systems in environments that can be modelled by a Rayleigh fading channel.

This thesis investigates both theoretical and practical aspects of the design and analysis of modern error-control coding schemes, namely low-density parity-check (LDPC) codes and rateless codes for unequal error protection (UEP). It also studies the application of modern error-control codes in efficient data dissemination in wireless ad-hoc and sensor networks. Two methodologies for the design and analysis of UEP-LDPC codes are proposed. For these proposed ensembles, density evolution formulas over the binary erasure channel are derived and used to optimize the degree distribution of the codes. Furthermore, for the first time, rateless codes that can provide UEP are developed. In addition to providing UEP, the proposed codes can be used in applications for which unequal recovery time is desirable, i.e., when more important parts of data are required to be recovered faster than less important parts. Asymptotic behavior of the UEP-rateless codes under the iterative decoding is investigated. In addition, the performance of the proposed codes is examined under the maximum-likelihood decoding, when the codes have short to moderate lengths. Results show that UEP-rateless codes are able to provide very low error rates for more important bits with only a subtle loss in the performance of less important bits. Moreover, it is shown that given a target bit error rate, different parts of the information symbols can be decoded after receiving different numbers of encoded symbols. This implies that information can be recovered in a progressive manner, which is of interest in many practical applications such as media-on-demand systems. This work also explores fundamental research problems related to applying error-control coding such as rateless coding to the problem of reliable and energy-efficient broadcasting in multihop wireless ad-hoc sensor networks. The proposed research touches on the four very large fields of wireless networking, coding theory, graph theory, and percolation theory. Based on the level of information that each node has about the network topology, several reliable and energy-efficient schemes are proposed, all of which are distributed and have low complexity of implementation. The first protocol does not require any information about the network topology. Another protocol, which is more energy efficient, assumes each node has local information about the network topology. In addition, this work proposes a distributed scheme for finding low-cost broadcast trees in wireless networks. This scheme takes into account various parameters such as distances between nodes and link losses. This protocol is then extended to find low-cost multicast trees. Several schemes are extensively simulated and are compared.