111 |
A multi-strategy approach for congestion-aware real-time videoIya, Nuruddeen Mohammed January 2015 (has links)
No description available.
|
112 |
Application of learning algorithms to traffic management in integrated services networksHall, Jason Lee January 1999 (has links)
No description available.
|
113 |
LOH- und Expressionsanalysen zur Identifikation neuer prognostischer Marker in Wilms Tumoren / LOH and expression analyses for the identification of new prognostic markers in Wilms tumorsWittmann, Stefanie January 2007 (has links) (PDF)
Der Wilms Tumor (WT), auch Nephroblastom genannt, zählt zu den im Kindesalter am häufigsten auftretenden malignen Tumoren und entsteht meist unilateral (90 – 95 %) und sporadisch (98 – 99 %). Leider sind bis heute die molekularen Ursachen, die zur Entwicklung dieser Tumoren führen nur unzureichend aufgeklärt. So werden bisher nur drei Gene mit dem Auftreten von WT in Verbindung gebracht: WT1, CTNNB1 und WTx. Während WT1 und CTNNB1 jeweils Mutationsraten von etwa 10 – 15 % aufweisen, die zudem häufig gemeinsam vorliegen, werden für WTx Mutationsraten von etwa 30 % beobachtet. Die genetischen Alterationen der anderen Tumoren sind noch immer komplett unbekannt. Ziel dieser Arbeit war aus diesem Grund die Identifikation von relevanten Regionen und Genen, die an der Entstehung bzw. dem klinischen Fortschreiten von Wilms Tumoren beteiligt sind. Zusätzlich sollten weitere Untersuchungen zur Einschätzung ihres prognostischen Potenzials dienen. In einem ersten Ansatz wurden die Chromosomenbereiche 11q und 16q in einer großen Anzahl von Wilms Tumoren auf LOH (=loss of heterozygosity), d.h. den (partiellen) Verlust von genetischem Material, untersucht. In beiden Fällen wurden erhöhte LOH-Raten von etwa 20 % beobachtet, jedoch war keine Eingrenzung der relevanten Regionen möglich, da Allelverluste nicht stets ab einem bestimmten Marker beobachtet wurden. Ein Vergleich mit der Histologie ergab signifikante Assoziationen der Allelverluste mit anaplastischen und Mischtyp-Tumoren (nur für LOH 11q), wohingegen kaum LOHs in epithelialen und stromareichen Tumoren festgestellt wurden. Somit scheinen auf 11q und 16q Gene vorzuliegen, die einerseits die Differenzierung in Epithel und Stroma begünstigen oder andererseits ein blastemreiches und anaplastisches Erscheinungsbild verhindern. Jedoch könnte auch die Assoziation von bestimmten Subtypen mit LOH 11q und 16q auf eine Entstehung aus unterschiedlichen Zellen hindeuten. Weiterhin war das Auftreten von LOH, v.a. wenn jeweils der komplette Chromosomenarm betroffen war, mit einem erhöhten Rezidiv- und Sterberisiko (nur LOH 11q) verbunden. Somit konnte gezeigt werden, dass LOH-Untersuchungen auf 11q und 16q zur Identifikation von Hochrisikopatienten für die Entwicklung von Rezidiven bzw. erhöhter Mortalität eingesetzt werden können, wodurch eine individuelle Anpassung der Therapiemaßnahmen ermöglicht wird. In einem zweiten Ansatz wurden eine Reihe von bereits publizierten potenziellen Markergenen in einer großen Anzahl von Wilms Tumoren mit Hilfe der Realtime RT-PCR auf ihre Relevanz überprüft. Allen diesen Genen wurde zuvor eine Funktion bei der histologischen Klassifikation der Tumoren bzw. bei der Vorhersage bestimmter klinischer Verläufe zugeschrieben. Die univariate Analyse diente der Beurteilung der Relevanz einzelner Gene, wohingegen die multivariate Analyse zur Bestimmung von prognostischen Genkombinationen eingesetzt wurde. Anschließend erfolgte die Validierung mittels eines zweiten und unabhängigen Tumorsatzes. Auch wenn viele der bereits publizierten Marker und in der ersten Analyse erhaltenen Assoziationen in einem weiteren und unabhängigen Tumorsatz nicht verifizierbar waren, konnten dennoch einige frühere Ergebnisse repliziert und die Relevanz der entsprechenden Gene nachgewiesen werden. Neben der Verbindung der Repression von HEY2 und TRIM22 mit Hochrisikotumoren bzw. einer höheren Sterbewahrscheinlichkeit fanden sich schwach signifikante Assoziationen auch für die verminderte Expression von TRIM22 und VEGF mit der Histologie. Ebenso waren erhöhte Level von TERT und die Repression von TRIM22 mit der Entwicklung eines Rezidivs verbunden. Vor allem aber die Korrelation der Repression von HEY2 und VEGF sowie einer Überexpression von CA9 mit Rezidiven, Tumoren hoher Malignität oder primären Metastasen verweisen auf die Notwendigkeit, besonders die Hypoxie- und Angiogenese-Signalkaskaden in Wilms Tumoren zu untersuchen, um deren Einfluss v.a. auf das Fortschreiten und die Ausbreitung der Tumoren zu evaluieren. Auch wenn die multivariate Analyse nicht zu relevanten Genkombinationen führte, konnte hier dennoch eine schwache Assoziation der verminderten Expression von TOP2A und TRIM22 mit primären Metastasen oder einer erhöhten Mortalität, sowie der Überexpression von TERT mit der Rezidivbildung bestätigt werden. Interessanterweise stellte sich die Histologie, die derzeit das Hauptkriterium für die Risikoklassifikation darstellt, weder als geeigneter prognostischer Marker für die Beurteilung des Rezidiv- noch des Sterberisikos heraus. Somit sollten Realtime RT-PCR Analysen in Zukunft als weiterer Faktor zur Beurteilung des Rezidiv- und Sterberisikos eingesetzt werden, um eine individuelle Anpassung der Therapie zu ermöglichen. Basierend auf den Ergebnissen der Realtime RT-PCR Analyse wurde der Einfluss der Expression ausgewählter Gene auf Primärkulturen, die aus nativem Wilms Tumormaterial gewonnen wurden, untersucht. Nach der Überexpression von HEY2, EGR1, MYCN und TRIM22 wurden bei allen Zellen hohe Sterberaten beobachtet, v.a. bei HEY2 und EGR1. Leider konnte weder für HEY2 noch für EGR1 der Grund hierfür aufgeklärt werden, allerdings war bei EGR1 weder die Apoptose noch die Seneszenz beteiligt. Im Gegensatz hierzu wurde die Apoptose als entscheidender Mechanismus bei MYCN und v.a. TRIM22 ermittelt. Außerdem scheint bei MYCN ein großer Anteil an Zellen in die Seneszenz einzutreten. Auch wenn diese ersten Untersuchungen an Primärkulturen von Wilms Tumoren eindeutig die Relevanz dieser Gene für die Entwicklung bzw. das Fortschreiten der Tumoren bestätigten, so sind trotz alledem weitere Experimente v.a. in einer größeren Anzahl genetisch unterschiedlicher Primärkulturen nötig, um das endgültige Potenzial dieser Gene aufzuklären. / Wilms tumor (WT), also called Nephroblastoma, belongs to the most common malignant tumors occurring in childhood. Most of these Wilms tumors develop unilaterally (90 – 95 %) and sporadically (98 – 99 %). Unfortunately, only little is known about the molecular background underlying their development with only three genes known so far: WT1, CTNNB1 and WTx. Mutations in WT1 and CTNNB1 occur only in a minor fraction of Wilms tumors of about 10 - 15 % and are often associated with each other, while mutations in WTx can be found in about 30 % of tumors. The genetic alterations of the other tumors are completely unknown. Hence, the aim of this thesis was to identify important regions and genes that are involved in Wilms tumor formation and/or progression and to further characterize their potential as markers for the prediction of certain clinical outcomes. First, chromosome arms 11q and 16q were screened for LOH (= loss of heterozygosity), which means the (partial) loss of the genome in a cell, in a large cohort of Wilms tumors. In both regions LOH rates of about 20 % were detected, but since allele losses did not always start at the same marker in the different tumors it was not possible to delimit any relevant subregions. Since there were significantly higher rates of allele loss in anaplastic and mixed-type (only 11q) tumors and almost no allele loss in epithelial and stromal tumors, 11q and 16q must contain genes that either facilitate the epithelial and stromal differentiation of cells or hamper the appearance of blastemal and anaplastic phenotypes. Otherwise, the obvious possibility to discriminate these histological subtypes by allele loss on 11q and 16q might be explained by a development from different precursor cells. Higher rates of LOH could also be linked to higher risks for relapse and death (11q only), especially when the whole chromosome arms were involved. Therefore, investigation of LOH on 11q and 16q may help to adjust the therapeutic regimens by identifying high-risk patients for relapse and death. A second approach was to reinvestigate the expression of a number of published marker genes in a larger set of Wilms tumors with a uniform method, the realtime RT-PCR. All of the genes were suggested to facilitate classification and/or prediction of certain clinical outcomes. Univariate analysis was performed to screen for relevant genes, followed by multivariate analysis to search for predictive gene combinations. Finally, validation of associations found in the first cohort was performed in a second and independent tumor set. Unfortunately, many of the previously published markers as well as associations of the first tumor set could not be verified in a new and independent tumor set. Nevertheless, it was possible to replicate the results of a number of genes and evidence their prognostic relevance. These included the repression of HEY2 and TRIM22 for high-risk tumors or mortality. Weaker correlations were verified for the repression of TRIM22 and VEGF with the histological risk and for overexpression of TERT and repression of TRIM22 with later relapse. Since the weaker expression of HEY2 and VEGF as well as the overexpression of CA9 was significantly linked to relapse, high malignant tumors or metastasis the hypoxia / angiogenesis pathways should be investigated in Wilms tumors especially with regard to the progression and spreading of tumors. Finally, multivariate analysis substantiated a weak association of repression of TOP2A and TRIM22 with metastasis or death and of overexpression of TERT with subsequent relapse. Most interestingly, histology, the current gold standard used for prediction of risks for relapse and death, could not be verified as potent prognostic factor for neither of them. Hence, realtime RT-PCR analyses can aid in stratification of tumors and prediction of relapse and death risks to intensify therapy for high-risk patients on one hand and to reduce therapy and side-effects in low-risk patients on the other hand. Based on the results of the realtime RT-PCR analyses the expression of several genes was ascertained in primary cell cultures cultivated from native Wilms tumor material. Overexpression of MYCN, TRIM22 and especially HEY2 and EGR1 by viral transduction resulted in high rates of cell death. Unfortunately, the underlying mechanism of death could be determined neither for HEY2 nor for EGR1, though for EGR1 the involvement of apoptosis and senescence could be excluded. In contrast, death in MYCN and especially in TRIM22 overexpressing cells could be attributed to high rates of apoptosis. Furthermore, a large fraction of MYCN cells seem to enter cell senescence and stop to proliferate. These results clearly corroborate the proposed relevance of the investigated genes in the development and/or progression of Wilms tumors. Nevertheless, further experiments in different primary cell cultures of Wilms tumors are necessary to clarify the real potential of these genes.
|
114 |
A model of process interaction in real-time distributed computer control systemsCohen, Jack Errol January 1991 (has links)
A thesis submitted to the Faculty of Engineering, University of the Witwatersrand,
Johannesburg, for the degree Doctor of Philosophy. / Real-time computer control is characterized by the need for a high degree of lnteraction
between some machine or physical process, its controlling computer, and
the human operator. recently there has been a trend towards the use of distributed
real-time computer systems which potentially offer greater functional flexibility, better maintainability and better reliability than centralized systems, The increasing
demands that are being placed on real-time computer control systems have highlighted
the deficiencies of current heuristic design techniques and emphasised the
need Ior solid theoretical design precepts. / AC2017
|
115 |
Air charge system emulation for diesel engineZhang, Kai January 2010 (has links)
The work presented in this thesis details a novel engine evaluation approach utilising real-time simulation and advanced engine testing systems for general applicability to new generations of air charging systems. A novel engine air charging system including a charge air handling unit (CAHU) has been developed which is connected to an engine to emulate advanced boosting system conditions. Significant analytical and development work has focused on generating a real-time turbocharger model such that the CAHU can be effectively controlled to emulate the turbocharger performance under both steady and pulsating conditions. Experimental work was carried out to evaluate this new engine air charge testing system against a production turbocharged baseline engine. The accuracies with respect to the boost pressure, turbocharger speed, mass air flow, and fuel consumption in the steady state tests are above 95%, and the level of confidence for the engine back pressure is approximately 90%. The difference of turbocharger speed between the steady turbocharger model and the pulsation model is also identified. In engine transient tests, the boost pressure and engine torque have shown fast response characteristics similar to that of the baseline engine. While general transient trends were achieved, some issues were identified with the high speed control of the CAHU interacting with the dSPACE real time turbocharger model. It is proposed that future improvement can be achieved via applying new control algorithms to improve the accuracy and tracking the CAHU control without increasing the system instabilities.
|
116 |
Feasibility Investigation of Real-time Quantitative Quasi-static Ultrasound ElastographyYuan, Lili 25 April 2017 (has links)
The individual soft tissues in the human body, such as liver, prostate, thyroid and breast, can each be characterized by a set of mechanical properties. Among these properties, the stiffness, or Young’s modulus, is of particular interest, as disease processes or abnormal growths introduce changes in the tissue stiffness. For example, cirrhosis is associated with an increase in stiffness in the affected region(s) of the liver, and the severity has a strong positive correlation with the measured liver tissue stiffness. Although the conventional ultrasound image is produced by changes in acoustic properties, most notably acoustic impedance (equal to density times sound speed), it is in fact possible to measure tissue strain ultrasonically, by performing ultrasound imaging while the tissue region of interest is mechanically perturbed. Although in principle incorrect, such strain imaging methods are commonly referred to as ultrasound elastography imaging. While tissue strain can reveal the presence of stiffness changes, its diagnostic value is limited due to the inability to reveal the magnitude of the stiffness change. Still, strain imaging is a feature on several commercial scanners. There does in fact exist an elegant, but complex and quite expensive, quantitative ultrasound method of imaging the elasticity of soft tissues, called Supersonic Shear imaging (SSI). However, a much lower cost method of quantitatively imaging tissue elasticity would be useful, especially if the method can be implemented with only minor modifications to existing ultrasound scanner design. This dissertation research deals with an attempt of designing and testing such a method. Ultrasound elastography encompasses a number of diverse techniques, roughly categorized by the mechanical perturbation method into two main groups: quasi-static and dynamic methods. Dynamic elastography requires a vibrating source, either separate or integrated with a transducer, making the imaging system cumbersome, especially for the portable systems. Quasi-static elastography only requires conventional ultrasound hardware, however current techniques remain qualitative with unknown stress distribution. This dissertation focuses on the investigation of free hand quantitative quasi-static elastography, aiming to real time assessment. Our proposed low cost real-time ultrasound elastography system is based on determining an axial strain and an axial stress over a region of interest, i.e., an axial strain image and an axial stress image are required. By taking the axial stress/axial strain ratio for each pixel in the image, an actual elasticity image is established. To achieve this goal, our system needs to ultrasonically measure the mechanical strain fast and accurately over a specified image plane; likewise, the system needs to be able to calculate the mechanical stress over the same image plane in real time. Now, the stress imaging will require us to apply a quasi-static force function and also to be able to quantify this force function. There are two major research efforts we have made to implement a low cost real-time ultrasound elastography system. The first important topic of this dissertation involves the development of a novel displacement and strain estimator based on analytical phase tracking (APT), which has been demonstrated to give better performance in terms of accuracy, resolution and computational efficiency (approximately 40 times faster than the standard time domain cross correlation method). The second important topic is the stress field reconstruction, with efforts in: 1) integrate force sensors into a single linear array transducer probe, with the goal of quantifying the applied force function; 2) propose a superposition method based on Love’s analytical equation to calculate the stress distribution, where this solution is computationally fast enough to allow real time stress field estimation; 3) analyze the accuracy of the proposed stress method using finite element analysis as a reference on different simulated phantoms. The final objective is to combine the strain and stress information together for quantitative elastography. Correspondingly, we have implemented experiments to evaluate the method on homogeneous and inhomogeneous phantoms of various types. Results show that this method is able to distinguish medium with different stiffness. We have conducted experiments to study the feasibility and improve the accuracy of this estimation technique based on phantoms with known elasticity. In principle, such a technique could be used to image the distribution of Young’s modulus under quasi-static compression, with specific applications to medical imaging.
|
117 |
Control-flow Integrity for Real-time Embedded SystemsBrown, Nicholas 27 April 2017 (has links)
As embedded systems become more connected and more ubiquitous in mission- and safety-critical systems, embedded devices have become a high- value target for hackers and security researchers. Attacks on real-time embedded systems software can put lives in danger and put our critical infrastructure at risk. Despite this, security techniques for embedded systems have not been widely studied. Many existing software security techniques for general purpose computers rely on assumptions that do not hold in the embedded case. This thesis focuses on one such technique, control-flow integrity (CFI), that has been vetted as an effective countermeasure against control-flow hijacking attacks on general purpose computing systems. Without the process isolation and fine-grained memory protections provided by a general purpose computer with a rich operating system, CFI cannot provide any security guarantees. This thesis explores a way to use CFI on ARM Cortex-R devices running minimal real-time operating systems. We provide techniques for protecting runtime structures, isolating processes, and instrumenting compiled ARM binaries with CFI protection.
|
118 |
Deep Learning Binary Neural Network on an FPGARedkar, Shrutika 27 April 2017 (has links)
In recent years, deep neural networks have attracted lots of attentions in the field of computer vision and artificial intelligence. Convolutional neural network exploits spatial correlations in an input image by performing convolution operations in local receptive fields. When compared with fully connected neural networks, convolutional neural networks have fewer weights and are faster to train. Many research works have been conducted to further reduce computational complexity and memory requirements of convolutional neural networks, to make it applicable to low-power embedded applications. This thesis focuses on a special class of convolutional neural network with only binary weights and activations, referred as binary neural networks. Weights and activations for convolutional and fully connected layers are binarized to take only two values, +1 and -1. Therefore, the computations and memory requirement have been reduced significantly. The proposed architecture of binary neural networks has been implemented on an FPGA as a real time, high speed, low power computer vision platform. Only on-chip memories are utilized in the FPGA design. The FPGA implementation is evaluated using the CIFAR-10 benchmark and achieved a processing speed of 332,164 images per second for CIFAR-10 dataset with classification accuracy of about 86.06%.
|
119 |
Real time implementation of SURF algorithm on FPGA platformZhu, Sichao 30 April 2014 (has links)
Too many traffic accidents are caused by drivers’ failure of noticing buildings, traffic sign and other objects. Video based scene or object detection which can easily enhance drivers’ judgment performance by automatically detecting scene and signs. Two of the recent popular video detection algorithms are Background Differentiation and Feature based object detection. The background Differentiation is an efficient and fast way of observing a moving object in a relatively stationary background, which makes it easy to be implemented on a mobile platform and performs a swift processing speed. The Feature based scene detection such like the Speeded Up Robust Feature (SURF), is an appropriate way of detecting specific scene with accuracy and rotation and illumination invariance. By comparison, SURF computational expense is much higher, which remains the algorithm limited in real time mobile platform. In this thesis, I present two real time tracking algorithms, Differentiation based and SURF based scene detection systems on FPGA platform. The proposed hardware designs are able to process video of 800*600 resolution at 60 frames per second, the video clock rate is 40 MHz.
|
120 |
Implementation of a Modular Software Architecture on a Real-Time Operating System for Generic Control over MRI Compatible Surgical RobotsGandomi-Bernal, Katie 25 April 2018 (has links)
Software used in medical settings operate in complex and variable environments. Programs need to integrate well not only with their electrical and mechanical components, but also within the socio-technological setting they participate in. In this Master's Thesis, a modular software architecture for controlling surgical robot systems within magnetic resonance scanners is designed and implemented. The C++ program runs on a sbRIO 9651 real-time operating system and an object oriented design is taken. Robot kinematics and controls are put into effect in software and validated. Communication with up to ten daughter cards occurs via SPI and external information is exchanged via OpenIGTLink. A web-based engineering console made with ReactJS is also constructed to provide a visual interface for actuating motor axes and executing robot functionality. Documentation of the code is provided and the program was validated quantitatively with software tests and qualitatively through experimentation in MRI suites.
|
Page generated in 0.0364 seconds