Spelling suggestions: "subject:"radio apropagation"" "subject:"radio depropagation""
1 |
A study of the end point geometry in meteor burst systems using a microcomputer signal loggerWorsnop, John C. January 1990 (has links)
No description available.
|
2 |
Propagation studies for microcellular mobile radioChia, S. T. S. January 1987 (has links)
No description available.
|
3 |
Mobile radio with fuzzy cell boundariesYacoub, M. D. January 1988 (has links)
No description available.
|
4 |
Propagation and bit error rate measurements in the millimetre wave band about 60GHzTharek, A. R. January 1988 (has links)
No description available.
|
5 |
Investigating the use of ray tracing for signal-level radar simulation in space monitoring applications: a comparison of radio propagation modelsMartin, Mogamat Yaaseen 11 September 2023 (has links) (PDF)
This thesis presents the design and development of an accelerated signal-level radar simulator with an emphasis on space debris monitoring in the Low Earth Orbit. Space surveillance represents a major topic of concern to astronomers as the threat of space debris and orbital overpopulation looms – particularly due to the lack of effective mitigation techniques and the limitations of modern space-monitoring sensors. This work thus aimed to investigate and design possible tools that could be used for training, testing and research purposes, and thereby aid further study in the field. At present, there exist no three-dimensional, ray-traced, signal-level radar simulators available for public use. As such, this thesis proposes an open-source, ray-traced radar simulator that models the interactions between spaceborne targets and terrestrial radar systems. This utilises a ray-tracing algorithm to simulate the effects of debris size, shape, orientation, and material properties when computing radar signals in a typical simulation. The generated received signals, produced at the output of the simulator, were also verified against systems theory, and validated with an existing, well-established simulator. The developed software was designed to aid astronomers and researchers in space situational awareness applications through the simulation of radar designs for orbital surveillance experiments. Due to its open-source nature, it is also expected to be used in training and research environments involving the testing of space-monitoring systems under various simulation conditions. The software offers native support for measured Two-Line Element datasets and the Simplified General Perturbations #4 orbit propagation model, enabling the accurate modelling of targets and the dynamic orbital forces acting upon them. As a result, the software has aptly been named the Space Object Astrodynamics and Radar Simulator – or SOARS. SOARS was built upon the foundations of a general-purpose radar simulator known as the Flexible Extensible Radar Simulator – or FERS – which provided integrated radar models for propagation loss, antenna shapes, Doppler and phase shifts, Radar Cross Section modelling, pulse waveforms, high-accuracy clock mechanisms, and interpolation algorithms. While FERS lacked various features required for space-monitoring applications, many of its implementations were used in SOARS to minimise simulation limits and maximise signal rendering accuracy by supporting an arbitrary number of transmitters, receivers, and targets. The goal was thus to have the simulator limited only by the end-user's system, and to specialise the operation of the software towards space surveillance by integrating additional features – such as built-in models for environmental and system noise, multiscatter effects, and target modelling using meshes comprised of triangular primitives. After completing the software's development, the ray-traced simulator was compared against a more streamlined version of SOARS that made use of point-model approximations for quick-look simulations, and the trade-offs between both simulators (including software runtime, memory utilisation and simulation accuracy) were investigated and evaluated. This assessed the value of implementing ray tracing in a radar simulator operating primarily within space contexts and evaluated the results of both simulators using detection processing as a demonstrated application of the system. And while the use of ray tracing resulted in significant costs in speed and memory, the investigation found that the ray-traced simulator generated more reliable results relative to the point-model version – providing various advantages in test scenarios involving shadowing and multiscatter. The design of the SOARS software, as well as its point-model “baseline” alternative and the investigation into each simulator's advantages and disadvantages, are thus presented in this thesis. The developed programs were released as open-source tools under the GNU General Public Licence and are freely available for public use, modification, and distribution.
|
6 |
GIS Aided Radio Wave Propagation Modeling and AnalysisQing, Li 04 August 2005 (has links)
The analysis of radio wave propagation is a crucial part in designing an efficient wireless communication system. The Geographic Information System (GIS) can be incorporated into this procedure because most of the factors in radio wave propagation are geographic features.
In this research, a commercial wireless planning software is tested in a field driving test carried out in Montgomery County, VA. The performance of current wireless planning software is evaluated based on field measurement. The received signal strength data collected during this driving test are then analyzed in a GIS environment in a statistical approach. The effects of local geographic features are modeled in GIS by appropriate spatial analyses. / Master of Science
|
7 |
Enhancing wireless communication system performance through modified indoor environmentsQasem, Nidal January 2014 (has links)
This thesis reports the methods, the deployment strategies and the resulting system performance improvement of in-building environmental modification. With the increasing use of mobile computing devices such as PDAs, laptops, and the expansion of wireless local area networks (WLANs), there is growing interest in increasing productivity and efficiency through enhancing received signal power. This thesis proposes the deployment of waveguides consisting of frequency selective surfaces (FSSs) in indoor wireless environments and investigates their effect on radio wave propagation. The received power of the obstructed (OBS) path is attenuated significantly as compared with that of the line of sight (LOS) path, thereby requiring an additional link budget margin as well as increased battery power drain. In this thesis, the use of an innovative model is also presented to selectively enhance radio propagation in indoor areas under OBS conditions by reflecting the channel radio signals into areas of interest in order to avoid significant propagation loss. An FSS is a surface which exhibits reflection and/or transmission properties as a function of frequency. An FSS with a pass band frequency response was applied to an ordinary or modified wall as a wallpaper to transform the wall into a frequency selective (FS) wall (FS-WALL) or frequency selective modified wall (FS-MWALL). Measurements have shown that the innovative model prototype can enhance 2.4GHz (IEEE 802.11b/g/n) transmissions in addition to the unmodified wall, whereas other radio services, such as cellular telephony at 1.8GHz, have other routes to penetrate or escape. The FSS performance has been examined intensely by both equivalent circuit modelling, simulation, and practical measurements. Factors that influence FSS performance such as the FSS element dimensions, element conductivities, dielectric substrates adjacent to the FSS, and signal incident angles, were investigated. By keeping the elements small and densely packed, a largely angle-insensitive FSS was developed as a promising prototype for FSS wallpaper. Accordingly, the resultant can be modelled by cascading the effects of the FSS wallpaper and the ordinary wall (FSWALL) or modified wall (FS-MWALL). Good agreement between the modelled, simulated, and the measured results was observed. Finally, a small-scale indoor environment has been constructed and measured in a half-wave chamber and free space measurements in order to practically verify this approach and through the usage of the deterministic ray tracing technique. An initial investigation showing that the use of an innovative model can increase capacity in MIMO systems. This can be explained by the presence of strong multipath components which give rise to a low correlated Rayleigh Channel. This research work has linked the fields of antenna design, communication systems, and building architecture.
|
8 |
Indoor CM and MM wave propagation and diversity techniquesGhobadi, Ch January 1998 (has links)
No description available.
|
9 |
Theory of Stochastic Local Area Channel Modeling for Wireless CommunicationsDurgin, Gregory David 11 December 2000 (has links)
This dissertation outlines work accomplished in the pursuit of this degree. This report is also designed to be a general introduction to the concepts and techniques of small-scale radio channel modeling. At the present time, there does not exist a comprehensive introduction and overview of basic concepts in this field. Furthermore, as the wireless industry continues to mature and develop technology, the need is now greater than ever for more sophisticated channel modeling research.
Each chapter of this preliminary report is, in itself, a stand-alone topic in channel modeling theory. Culled from original reports and journal papers, each chapter makes a unique contribution to the field of channel modeling. Original contributions in this report include:
1. joint characterization of time-varying, space-varying, and frequency-varying channels under the rubric of duality
2. rules and definitions for constructing channel models that solve Maxwell's equations
3. overview of probability density functions that describe random small-scale fading
4. techniques for modeling a small-scale radio channel using an angle spectrum
5. overview of techniques for describing fading statistics in wireless channels
6. results from a wideband spatio-temporal measurement campaign
Together, the chapters provide a cohesive overview of basic principles. The discussion of the wideband spatio-temporal measurement campaign at 1920 MHz makes an excellent case study in applied channel modeling and ties together much of the theory developed in this dissertation. / Ph. D.
|
10 |
Software defined radio for cognitive networksDumont, Nathan January 2014 (has links)
The introduction of software radio has meant that standards for radio communication can evolve in a much more natural way, changing only a little at a time without making all of the hardware obsolete. It has become apparent that these changes may affect some systems more favourably than others so allowing the software radio to decide how to adapt can actually improve the link quality. This development is known as cognitive radio and can improve the performance of a single radio link. As an extension of this progress is being made on designing cognitive networks where the software radios which make up the network not only optimise their own link but share information about their goals and situation with other nodes in the network, using all of this data together can optimise overall end-to-end performance of the network. These advances in network design and optimisation come at a time where many parts of the world are re-structuring the television broadcast bands. These have been allocated for a long time and are a generous allocation of a valuable resource. With the power of a cognitive network it is possible to design equipment that can automatically avoid the licensed TV transmitters which only take a fraction of the total bandwidth in any one area. This allows many smaller cells to be fitted between the main transmitters. Assessing the availability of bandwidth and generating maps of available spectrum for these new cognitive networks requires a new approach to radio propagation modelling in the TV bands. Previous models use a worst case scenario to make sure that there is at least enough signal to receive the public service broadcasts in the majority of homes. Predicting where the limits of reception are and where it would be safe to broadcast on these channels requires a better, terrain dependent transmission model. In this thesis the Parabolic Equation Model is applied to the problem of predicting TV band occupancy and the results of this modelling is compared to field measurement to get an idea of how accurate the model is in practice.
|
Page generated in 0.0991 seconds