Approved for public release, distribution is unlimited / Methods used for designing the ramjet included conic shock tables; isentropic flow tables and the GASTURB code was used for aerothermodynamic performance prediction. The flow field through the proposed geometry was computed using the OVERFLOW code, and small modifications were made. Geometry and solid models were created and built using SolidWorks 3D solid modeling software. A prototype ramjet was manufactured with wind tunnel mounting struts capable of measuring axial force on the model. Shadowgraph photography was used in the Mach 4 supersonic wind tunnel at the Naval Postgraduate School's Turbopropulsion Laboratory to verify predicted shock placement, and surface flow visualization was obtained of the airflow from fuel injection ports on the inlet cone of the model. All indications are that the cold-flow tests were successful. / Ensign, United States Naval Reserve

In this thesis, a simple moving boundary technique has been suggested, implemented and verified. The technique may be considered as a generalization of the well-known "ghost" cell approach for boundary condition implementation. According to the proposed idea, the moving body does not appear on the computational grid and is allowed to move over the grid. The impermeable wall boundary condition is enforced by assigning proper gasdynamic values at the grid nodes located inside the moving body close to its boundaries (ghost nodes). The reflection principle taking into account the velocity of the boundaries assigns values at the ghost nodes. The new method does not impose any particular restrictions on the geometry, deformation and law of motion of the moving body. / The developed technique is rather general and can be used with virtually any finite-volume or finite-difference scheme, since the modifications of the schemes themselves are not required. In the present study the proposed technique has been incorporated into a one-dimensional non-adaptive Euler code and a two-dimensional locally adaptive unstructured Euler code. / It is shown that the new approach is conservative with the order of approximation near the moving boundaries. To reduce the conservation error, it is beneficial to use the method in conjunction with local grid adaptation. / The technique is verified for a number of one and two dimensional test cases with analytical solutions. It is applied to the problem of supersonic inlet starting via variable geometry approach. At first, a classical starting technique of changing exit area by a moving wedge is numerically simulated. Then, the feasibility of some novel ideas such as a collapsing frontal body and "tractor-rocket" are explored.

No description available.

In the present work, two phase reacting flow in a single cavity Trapped Vortex Combustor (TVC) is studied at atmospheric conditions. KIVA-3V, numerical program for simulating three dimensional compressible reacting flows with sprays using Lagrangian-Drop Eulerian-fluid procedure is used. The stochastic discrete droplet model is used for simulating the liquid spray. In each computational cell, it is assumed that the volume occupied by the liquid phase is very small. But this assumption of very low liquid volume fraction in a computational cell is violated in the region close to the injection nozzle. This introduces grid dependence in predictions of liquid phase in the region close to the nozzle in droplet collision algorithm, and in momentum coupling between the liquid and the gas phase. Improvements are identified to reduce grid dependence of these algorithms and corresponding changes are made in the standard KIVA-3V models. Pressure swirl injector which produces hollow cone spray is used in the current study along with kerosene as the liquid fuel. Modifications needed for modelling pressure swirl atomiser are implemented. The Taylor Analogy Breakup (TAB) model, the standard model for predicting secondary breakup is improved with modifications required for low pressure injectors. The pressure swirl injector model along with the improvements is validated using experimental data for kerosene spray from the literature. Simulations of two phase reacting flow in a single cavity TVC are performed and the temperature distribution within the combustor is studied. In order to identify an optimum configuration with liquid fuel combustion, the following parameters related to fuel and air such as cavity fuel injection location, cavity air injection location, Sauter Mean Diameter (SMD) of injected fuel droplets, velocity of the fuel injected are studied in detail in order to understand the effect of these parameters on combustion characteristics of a single cavity TVC.