The modelling of multi-phase water flow is an important modern-day design tool used by engineers to develop practical systems which are beneficial to society . Multi-phase water flow can be found in many important industrial applications such as large scale conventional and nuclear power systems, heat transfer machinery, chemical process plants, and other important examples. Because of many inherent complexities in physical two-phase flow processes, no generalised system of equations has been formulated that can accurately describe the two-phase flow of water at all flow conditions and system geometries. This has led to the development of many different models for the simulation of two-phase flow at specific conditions. These models vary greatly in complexity. The simplest model that can be used to simulate two-phase flow is termed the homogeneous equilibrium (HEM) two-phase flow model. This model has been found useful in investigations of choking and flashing flows, and as an initial investigative model used before the formulation of more complex models for specific applications. This flow model is fully de ned by three conservation equations, one each for mass, momentum and energy. To close the model, an equation of state (EOS) is required to deliver system pressure values. When solving the HEM, a general practice is to employ an equation of state that is derived from a fundamental expression of the second law of thermodynamics. This methodology has been proven to deliver accurate results for two-phase system simulations. This study focused on an alternative formulation of the equation of state which was previously developed for the time dependent modelling of HEM two-phase flow systems, termed the rate form of the equation of state (RFES). The goal of the study was not to develop a new formulation of the EOS, but rather to implement the RFES in a transient simulation model and to verify that this implementation delivers appropriate results when compared to the conventional implementation methodology. This was done by formulating a transient pipe and reservoir network model with the HEM, and closing the model using both the RFES and a benchmark EOS known to deliver accurate system property values. The results of the transient model simulations were then compared to determine whether the RFES delivered the expected results. It was found that the RFES delivered sufficiently accurate results for a variety of system transients, pressure conditions and numerical integration factors. / MIng (Nuclear Engineering), North-West University, Potchefstroom Campus, 2014

The modelling of multi-phase water flow is an important modern-day design tool used by engineers to develop practical systems which are beneficial to society . Multi-phase water flow can be found in many important industrial applications such as large scale conventional and nuclear power systems, heat transfer machinery, chemical process plants, and other important examples. Because of many inherent complexities in physical two-phase flow processes, no generalised system of equations has been formulated that can accurately describe the two-phase flow of water at all flow conditions and system geometries. This has led to the development of many different models for the simulation of two-phase flow at specific conditions. These models vary greatly in complexity. The simplest model that can be used to simulate two-phase flow is termed the homogeneous equilibrium (HEM) two-phase flow model. This model has been found useful in investigations of choking and flashing flows, and as an initial investigative model used before the formulation of more complex models for specific applications. This flow model is fully de ned by three conservation equations, one each for mass, momentum and energy. To close the model, an equation of state (EOS) is required to deliver system pressure values. When solving the HEM, a general practice is to employ an equation of state that is derived from a fundamental expression of the second law of thermodynamics. This methodology has been proven to deliver accurate results for two-phase system simulations. This study focused on an alternative formulation of the equation of state which was previously developed for the time dependent modelling of HEM two-phase flow systems, termed the rate form of the equation of state (RFES). The goal of the study was not to develop a new formulation of the EOS, but rather to implement the RFES in a transient simulation model and to verify that this implementation delivers appropriate results when compared to the conventional implementation methodology. This was done by formulating a transient pipe and reservoir network model with the HEM, and closing the model using both the RFES and a benchmark EOS known to deliver accurate system property values. The results of the transient model simulations were then compared to determine whether the RFES delivered the expected results. It was found that the RFES delivered sufficiently accurate results for a variety of system transients, pressure conditions and numerical integration factors. / MIng (Nuclear Engineering), North-West University, Potchefstroom Campus, 2014