Dans l'industrie du forage pétrolier, les conditions de travail de plus en plus sévères requièrent sans cesse de nouveaux outils plus résistants à l'usure abrasive et à l'impact. Afin de répondre à ce défi, les travaux présentés ici, ont pour but l'élaboration de matériaux en carbure cémenté à gradient de composition par le procédé d'imbibition réactive. Ce procédé peut être décomposé en deux procédés de gradation, à savoir : l'imbibition et le revêtement réactif. L'imbibition a pour rôle d'enrichir graduellement, en phase liante, le coeur d'une pièce en carbure cémenté dense et repose sur le principe de migration de phase liquide dans un corps solide-liquide. Le revêtement réactif est un procédé qui s'applique également sur un carbure cémenté dense sur lequel est déposé un revêtement de nitrure de bore. Après avoir atteint le liquidus de la phase liante du carbure cémenté, une précipitation de borures ternaires prend place à la surface du matériau et s'étend graduellement sur des distances millimétriques. Dans le cas de pièces industrielles (inserts tricône et supports de taillants PDC (Polycrystalline Diamond Compact)), le traitement d'imbibition réactive permet de générer des gradients de dureté pouvant atteindre 450 HV sur 25 mm. L'élaboration de tels gradients a nécessité une meilleure compréhension des cinétiques ainsi que des phénomènes mis en jeu durant l'imbibition et le revêtement réactif. Dans le cas des taillants PDC, l'influence des paramètres du procédé HPHT de synthèse de la plaquette diamantée, sur le gradient de composition présent dans le support WC-Co après imbibition réactive, a été étudiée. Ces travaux se sont également intéressés à l'effet de ces gradients de composition sur les propriétés des plaquettes diamantées ainsi obtenues. A la suite d'essais mécaniques, les inserts WC-Co et taillants PDC gradués montrent une augmentation significative de leur résistance à l'abrasion (de 30 à 100%) et de leur tenue à l'impact (de 20 à 40%). / In oil drilling industry, harsher working conditions require ever new and more abrasive wear and impact resistant tools. To meet this challenge, the work presented here, is to develop graded cemented carbide materials by reactive imbibition process. This method can be divided into two gradation processes, namely, reactive coating and imbibition. Imbibition gradually enriches the core of dense cemented carbide with binder phase and is based on the principle of liquid phase migration in a solid-liquid body. Reactive coating also takes place in dense cemented carbide on which a boron nitride coating is deposited. After reaction with the WC-Co liquid binder, some ternary boride precipitations take place from surface to several millimeters deep. For industrial parts (inserts for roller cone bits and PDC (Polycrystalline Diamond Compact) cutters substrates), hardness gradients obtained can reach 450 HV on 25 mm. Such gradients development is passed through a better understanding of kinetics and phenomena occurring during imbibition and reactive coating. In case of PDC cutters, influence of HPHT process parameters, allowing diamond table synthesis, on the WC-Co substrate gradient, generated by reactive imbibition, was studied. This work was also interested in gradient effect on the obtained diamond tables properties. After mechanical tests, graded WC-Co inserts and graded PDC cutters show a significant increase of both wear resistance (from 30 to 100%) and impact resistance (from 20 to 40%).

Considerable attention has been focused on nanomaterials and their extensive applications. Metallic nanoparticles, especially gold nanoparticles (AuNPs) and silver nanoparticles (AgNPs), due to their superior physical, chemical, and optical properties, are vastly developed for numerous biomedical applications such as drug and gene delivery systems, diagnostic biosensors, imaging, and therapeutics. This study presents a low-cost method for the fabrication of self-assembled metallic nanoparticles, including gold and silver, via a reactive blade coating process, which is carried out based on in situ reduction of the metal precursors. This technique is a roll-to-roll compatible technique suitable for scalable nanomanufacturing. Oleylamine was used as a reducer agent, and gold (III) chloride hydrate and silver salts, including silver nitrate and silver perchlorate hydrate, were used as the metal precursors. Fabrication was carried out by first blade coating the reducer ink and subsequently coating the precursor ink followed by 3 hours of heat treatment. Various solvent systems were used to examine the effect of different solvents on the fabrication process. Surface morphology, crystalline phase composition, and plasmon resonance of the coated samples were characterized by scanning electron microscopy (SEM), X-ray diffractometer (XRD), and UV-Vis spectroscopy, respectively. Results demonstrated the synthesis of spherical self-assembled AuNPs using toluene (TOL) and isopropyl alcohol (IPA) for reducing and precursor solvents, respectively. Changing the concentration of reactants or increasing the coating layers exhibited a change in the average size of AuNPs. Self-assembled AuNPs thin films were also demonstrated to have the potential to be used as a biosensing platform based on localized surface plasmon resonance (LSPR) effect to detect the elevated levels of glucose in an aqueous solution. Recently, the world has faced a pandemic of Covid-19 caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which has threatened human health and has brought a worldwide devastating economic and social crisis. Hence, finding a solution to mitigate the current breakout of Covid-19 is vital to protect the international community from its causing harm. AgNPs as an antimicrobial agent, which has exhibited promising antiviral activity against several viruses, can offer a resolution to combat the spread of Covid-19. In this regard, AgNPs thin films were fabricated analogously via blade coating using various reducer and silver salt inks made of different solvent systems. Virucidal efficacy of reactive blade coated AgNPs on glass substrates was analyzed against human coronavirus 229E, a virus from the Coronavirus family, as a surrogate SARS-CoV-2 (according to the Level 2 Biosafety facility at uOttawa). Plaque forming assay indicated more than 99.99% reduction in infectivity of the virus when it contacts the AgNPs coated glass for 30 min before infecting cells. These results suggest the excellent potential for reactive blade coated AgNPs as an antiviral agent against coronavirus to avoid the spread of the virus.