Thesis (M.S.)--Worcester Polytechnic Institute. / Keywords: crown; splash; spreading; oscillatory; droplets; microgravity; viscosity; map; stability; solid surface; surface tension; gravity. Includes bibliographical references (p. 111-113).

Electromagnetic levitation experiments provide a powerful tool that allows for the study of nucleation, solidification and growth in a containerless processing environment. Containerless processing allows for the study of reactive melts at elevated temperatures without chemical interactions or contamination from a container. Further, by removing the interface between the liquid and its container, this processing technique allows for greater access to the undercooled region for solidification studies. However, in these experiments it is important to understand the magnetohydrodynamic flow within the sample and the effects that this fluid flow has on the experiment. A recent solidification study found that aluminum-nickel alloy sample have an unusual response of the growth rate of the solid to changes in undercooling. This alloy experienced a decrease in the growth velocity as the initial undercooling deepened, instead of the expected increase in solidification velocity with deepening undercoolings. Current work is exploring several different theories to explain this phenomenon. Distinguishing among these theories requires a comprehensive understanding of the behavior of the internal fluid flow. Our project, USTIP, has done flow modeling to support this and multiple other collaborators on ISS-EML. The fluid flow models presented for the aluminum-nickel sample provide critical insights into the nature of the flow within the aluminum-nickel alloy experiments conducted in the ISS-EML facility. These models have found that for this sample the RNG k-ε model should be used with this sample at temperatures greater than 1800 K and the laminar flow model should be used at temperatures lower than 1600 K. Other work in the ISS-EML, has studied the thermophysical properties of liquid germanium and has found the most recent measurements using oscillating drop techniques to have a discrepancy from the expected property measurements taken terrestrially. Investigating this discrepancy required the quantification of the velocity and characterization of the internal fluid flow in the drop. The models have found that the flow within the sample maintains turbulent behavior throughout cooling. This thesis presents the analysis of the internal flow of four additional samples processed in the International Space Station Electromagnetic Levitation facility. These samples consist of the following alloys: Ti39.5Zr39.5Ni21, Cu50Zr50, Vitreloy 106, and Zr64Ni36. Our collaborators work required the internal flow to be characterized and quantified for their work on solidification. In addition to quantifying the velocity of the flow, the Reynolds number was calculated to characterize the flow during processing. Additionally, the shear-strain rate was calculated for the flow during processing up to the recalescence of the melt.

No description available.

In orbit, finding the "bottom" of your coffee cup is a non-trivial task. Subtle forces often masked by gravity influence the containment and transport of fluids aboard spacecraft, often in surprising non-intuitive ways. Terrestrial experience with capillary forces is typically relegated to the micro-scale, but engineering community exposure to large length scale capillary fluidics critical to spacecraft fluid management design is low indeed. Low-cost drop towers and fast-to-flight International Space Station (ISS) experiments are increasing designer exposure to this fresh field of study. This work first provides a wide variety of drop tower tests that demonstrate fundamental and applied capillary fluidics phenomena related to liquid droplets and gas bubbles. New observations in droplet auto-ejection, droplet combustion, forced jet combustion, puddle jumping, bubble jumping, and passive phase separation are presented. We also present the Capillary Beverage Experiment on ISS as a fun and enlightening application of capillary fluidics where containment and passive control of poorly wetting aqueous capillary systems is observed. Astronauts are able to smell their coffee from the open stable container while still drinking in an Earth-like manner with the role of gravity replaced by the combined effects of surface tension, wetting, and special container geometry. The design, manufacture, low-g demonstrations, and quantitative performance of the Space Cups are highlighted. Comparisons of numerical simulations, drop tower experiments, and ISS experiments testify to the prospects of new no-moving-parts capillary solutions for certain water-based life support operations aboard spacecraft.

The design of fluid management systems requires accurate models for fluid transport. In the low gravity environment of space, gravity no longer dominates fluid displacement; instead capillary forces often govern flow. This thesis considers the redistribution of fluid along an interior corner. Following a rapid reduction of gravity, fluid advances along the corner measured by the column length z = L(t), which is governed by a nonlinear partial differential equation with dynamical boundary conditions. Three flow types are examined: capillary rise, spreading drop, and tapered corner. The spreading drop regime is shown to exhibit column length growth L ~ t2/5, where a closed form analytic solution exists. No analytic solution is available for the capillary rise problem. However, a perturbed power law similarity solution is pursued to approximate an analytic solution in the near neighborhood of the exact solution for the spreading drop. It is recovered that L ~ t1/2 for the capillary rise problem. The tapered corner problem is not analytically understood and hence its corresponding L is undocumented. Based on the slender corner geometry, it is natural to hypothesize the tapered corner column length initially behaves like the capillary rise regime, but after sufficient time has elapsed, it transitions into the spreading drop regime. This leads to a conjecture that its column length growth L is restricted to t2/5 < L < t1/2. To verify this conjecture an explicit finite difference numerical solution is developed for all three regimes. As will be shown, the finite difference scheme converges towards the analytic solutions for the spreading drop and capillary rise regimes. From this we assume the finite difference scheme is accurate for corner flows of similar geometries, and thus apply this scheme the more onerous criteria of the tapered corner. Numerical results support the conjectured L behavior for the tapered corner. Understanding the dynamics of such flows and responses to various geometries offers design advantages for spacecraft waste-management systems, fuel control, hydration containment, cryogenic flows, and a myriad of other fluid applications.

Drop Towers provide brief terrestrial access to microgravity environments. When used for capillary fluidics research, a drop tower allows for unique control over an experiment's initial conditions, which enables, enhances, or otherwise improves the study of capillary phenomena at significantly larger length scales than can normally be achieved on the ground. This thesis provides a historical context for the introduction of a new, highly accessible, 2.1s tower design used for capillary research and presents a variety of demonstrative experimental results for purely capillarity-driven flows leading to bubble ingestion, sinking flows, multiphase flows, and droplet ejections. The focus of this thesis is paid to capillarity-driven droplet ejection including historical significance, mathematical models, criteria for ejection and experimental validation. A scale analysis provides a single parameter Su+ which is used to predict the flow velocity at the base of the nozzle. By simplifying the flow in the nozzle we identify two criteria for auto-ejection, the nozzle must be `short' and the velocity of the flow must be sufficient to invert the liquid meniscus and overpower surface tension at the nozzle tip such that We⁺ > 12. Drop tower experiments are conducted and compared to analytical predictions using a regimemap. This thesis also includes results from experiments experiments conducted in a stationary ground-based laboratory and aboard the International Space Station which clearly demonstrate droplet ejection in regimes from transient liquid jets to large isolated drops. Droplets generated in a microgravity environment are 106 times larger than 1g₀ counter-parts.

"The condensation of vapor onto a cooled surface is a phenomenon which can be difficult to quantify spatially and as a function of time; this thesis describes an ultrasonic system to measure this phenomenon. The theoretical basis for obtaining condensate film thickness measurements, which can be used to calculate growth rates and film surface features, from ultrasonic echoes will be discussed and the hardware and software will be described. The ultrasonic system utilizes a 5MHz planar piston transducer operated in pulse-echo mode to measure the thickness of a fluid film on a cooled copper block over the fluid thickness range of 50 microns to several centimeters; the signal processing algorithms and software developed to carry out this task are described in detail. The results of several experiments involving the measurement of both non-condensing and condensing films are given. In addition, numerical modeling of specific condensate film geometries was performed to support the experimental system; the results of modeling nonuniform fluid layers are discussed in the context of the effect of such layers on the measurement system."

Since astronaut time and energy are at a premium, effective countermeasures must be designed to maximize benefits while minimizing time/energy cost. Therefore, our intent was to design and evaluate a low volume, high intensity resistance training program (RTP) on the preservation of knee extensor and plantar flexor size, strength and neuromuscular function in response to unloading. A total of 32 subjects participated. Sixteen men underwent 21 days of unilateral lower limb suspension (ULLS) and were assigned to control (no RTP) (ULLS-CON, n=8) or countermeasures (ULLS-CM, n=8). The remaining subjects were ambulatory for 21 days and were assigned to no RTP (n=8) or countermeasures (n=8). Countermeasure subjects performed RTP every third day during the suspension period (total=6). The RTP consisted of 2 maximal isometric contractions (MVC), 1 set of 10 concentric/eccentric isotonic repetitions, and 1 set to exhaustion, at 80% of 1-repetition maximum (1RM). There was no change in muscle function in ambulatory subjects. Whole muscle cross sectional area (CSA) measured by computed tomography (CT) decreased 7% (thigh) and 7.5% (calf) in ULLS-CON (p<0.05), and was unchanged in ULLS-CM. MVC decreased 16.5% in both quadricep and calf muscles in ULLS-CON (p<0.05) and increased 6% in the quadricep of ULLSCM (p<0.05). Maximal concentric (CNC) and eccentric (ECC) isokinetic strength decreased an average of 18% and 17% in the knee extensors and plantar flexors of ULLS-CON, respectively (p<0.05) and was unchanged in ULLS-CM. 1RM decreased 16% in both quadricep and calf of ULLS-CON (p<0.05) and was unchanged in ULLSCM. Knee extensor work capacity, evaluated during 30 maximal CNC contractions (3.14 rad•sec-'), decreased 18% in ULLS-CON (p<0.05). Neural activation of knee extensors and plantar flexors was measured by electromyography (EMG). Submaximal v.lat, v.med, gast and sol EMG increased in ULLS-CON (p<0.05) and was unaltered in ULLSCM. Maximal EMG decreased 20% and 26% in v.1at and v.med, respectively in ULLSCON (p<0.05). ULLS-CM showed a 15% and 28% increase in v.med and gast maximal EMG (p<0.05). These data suggest knee extensor and plantar flexor muscle size, strength and neuromuscular function were preserved during unloading using a low volume, high intensity RTP performed every third day. / School of Physical Education

Musculoskeletal pathologies associated with decreased bone mass, including osteoporosis and disuse-induced bone loss, affect millions of Americans annually. Many pharmaceutical treatments have slowed osteoporosis, but there is still no countermeasure for bone loss observed in astronauts. Additionally, high magnitude and low frequency impact has been recognized to increase bone and muscle mass under normal but not microgravity conditions. However, a low magnitude and high frequency (LMHF) mechanical load experienced in activities such as postural control has also been shown to be anabolic to bone. While several clinical trials have demonstrated that the LMHF mechanical loading normalizes bone loss in vivo, the target tissues and cells of the mechanical load and underlying mechanisms mediating the responses are unknown. As such, the objectives of this project are to analyze cellular and molecular changes induced in osteoblasts by LMHF loading and to investigate the utility of a LMHF mechanical load in mitigating microgravity-induced bone loss. The central hypothesis of the project is that simulated microgravity or disuse conditions induce bone loss by inhibiting expression of genes critical in regulating bone formation, osteoblast differentiation, and subsequent mineralization while a LMHF mechanical load prevents these effects. To test this hypothesis, we developed an in vitro disuse system using the Random Positioning Machine (RPM). For the first time, we reported systemic gene expression studies in 2T3 preosteoblasts using the RPM disuse system showing that 140 genes were altered by RPM exposure with over two-fold statistically significant changes. Moreover, we also utilized an independent simulator called the Rotating Wall Vessel (RWV) to partially validate the in vitro disuse systems and to confine the list of genes to those most critical in regulating bone formation. After comparative studies, we constricted the list to 15 commonly changed genes, three of which were not only decreased with disuse but also increased with mechanical loading in vivo. Furthermore, we employed the RPM disuse system to evaluate the mechanism by which a LMHF load mitigates bone loss. Exposure of osteoblasts to the RPM decreased both ALP activity and mineralization even in the presence of bone morphogenic protein 4 (BMP4), and the LMHF mechanical loading prevented the RPM-induced decrease in both markers. Mineralization induced by LMHF mechanical loading was enhanced by treatment with BMP4 and blocked by the BMP antagonist noggin, suggesting a role for BMPs in this response. In addition, LMHF mechanical loading rescued the RPM-induced decrease in gene expression of ALP, runx2, osteomodulin, parathyroid hormone receptor 1, and osteoglycin. These findings show that osteoblasts directly respond to LMHF mechanical loading, potentially leading to normalization or prevention of bone loss caused by disuse or microgravity conditions. The mechanosensitive genes identified here provide potential targets for pharmaceutical treatments that may be used in combination with LMHF mechanical loading to better treat osteoporosis, disuse-induced bone loss, or microgravity-induced bone loss.

No description available.