We use the semi-inverse method to solve a St. Venant and an Almansi-Michell problem for a prismatic body made of a homogeneous and isotropic elastic material that is stress free in the reference configuration. In the St. Venant problem, only the end faces of the prismatic body are loaded by a set of self-equilibrated forces. In the Almansi-Michell problem self equilibrated surface tractions are also applied on the mantle of the body. The St. Venant problem is also analyzed for the following two cases: (i) the reference configuration is subjected to a hydrostatic pressure, and (ii) stress-strain relations contain terms that are quadratic in displacement gradients. The Signorini method is also used to analyze the St. Venant problem. Both for the St. Venant and the Almansi-Michell problems, the solution of the three dimensional problem is reduced to that of solving a sequence of two dimensional problems. For the St. Venant problem involving a second-order elastic material, the first order deformation is assumed to be an infinitesimal twist. In the solution of the Almansi-Michell problem, surface tractions on the mantle of the cylindrical body are expressed as a polynomial in the axial coordinate. When solving the problem by the semi-inverse method, displacements are also expressed as a polynomial in the axial coordinate. An explicit solution is obtained for a hollow circular cylindrical body with surface tractions on the mantle given by an affine function of the axial coordinate / Master of Science

L'épaule est un complexe articulaire formé par le thorax, la clavicule, la scapula et l'humérus. Alors que les orientation et position de ces derniers la rendent difficile à étudier, la compréhension approfondie de l'interrelation de ces segments demeure cliniquement importante. Ainsi, un nouveau modèle du membre supérieur est développé et présenté. La cinématique articulaire de 15 sujets sains est collectée et reconstruite à l'aide du modèle. Celle-ci s'avère être généralement moins variable et plus facilement interprétable que le modèle de référence. Parallèlement, l'utilisation de simplifications, issues de la 2D, sur le calcul d'amplitude de mouvement en 3D est critiquée. Cependant, des cas d'exception où ces simplifications s'appliquent sont dégagés et prouvés. Ainsi, ils sont une éventuelle avenue d'amélioration supplémentaire des modèles sans compromission de leur validé. / The shoulder is an articulated complex composed of the thorax, clavicle, scapula and humerus. While the relative orientation and position of the segments makes an in-depth study of the shoulder difficult, understanding the interaction between the segments remains clinically important. Thus, a new model of the upper limb is proposed. Joint kinematics of 15 subjects were collected and reconstructed using the model, and were found to be less variable and easier to interpret when compared to the reference model. Meanwhile, simplifications involving the use of 2D analysis to calculate range of motion in 3D are criticized. Exceptions where these simplifications apply, were however, shown. Thus, such simplifications can be applied to models in certain situations without compromising the models validity.

L'épaule est un complexe articulaire formé par le thorax, la clavicule, la scapula et l'humérus. Alors que les orientation et position de ces derniers la rendent difficile à étudier, la compréhension approfondie de l'interrelation de ces segments demeure cliniquement importante. Ainsi, un nouveau modèle du membre supérieur est développé et présenté. La cinématique articulaire de 15 sujets sains est collectée et reconstruite à l'aide du modèle. Celle-ci s'avère être généralement moins variable et plus facilement interprétable que le modèle de référence. Parallèlement, l'utilisation de simplifications, issues de la 2D, sur le calcul d'amplitude de mouvement en 3D est critiquée. Cependant, des cas d'exception où ces simplifications s'appliquent sont dégagés et prouvés. Ainsi, ils sont une éventuelle avenue d'amélioration supplémentaire des modèles sans compromission de leur validé. / The shoulder is an articulated complex composed of the thorax, clavicle, scapula and humerus. While the relative orientation and position of the segments makes an in-depth study of the shoulder difficult, understanding the interaction between the segments remains clinically important. Thus, a new model of the upper limb is proposed. Joint kinematics of 15 subjects were collected and reconstructed using the model, and were found to be less variable and easier to interpret when compared to the reference model. Meanwhile, simplifications involving the use of 2D analysis to calculate range of motion in 3D are criticized. Exceptions where these simplifications apply, were however, shown. Thus, such simplifications can be applied to models in certain situations without compromising the models validity.