Thesis is submitted in partial fulfilment for the degree of Master of Architecture (Professional) to the Faculty of Engineering and the Built Environment, School of Architecture and Planning at the University of the Witwatersrand, Johannesburg, 2016 / To make and to utilise. These two actions effortlessly encapsulate a fundamental quality of human beings. Ever since the dawn of industry, humans have developed a necessity to manufacture various items and systems in order to achieve a more efficient and enjoyable lifestyle. The nature of manufacturing has always been defined by the concept of input and output and over time has resulted in the unsustainable extraction of Earth’s natural resources in order to produce. Additionally, consumerism has exponentially increased the rate at which society manufactures and has consequently led to by-production of discarded waste. The presence of solid waste is adversely affecting the environment due to the fact that a large majority of it is non-biodegradable and thus pollutes today’s cities and natural ecosystems. In the context of Newtown, Johannesburg, the issue of discarded solid waste is of growing concern. As a result of the seamless coexistence of industry, commerce and culture and its proximity to important urban zones, this historic area of Johannesburg is attracting more and more people from various social demographics. In turn, this has led to higher levels of productivity and exploitation. As seen in most third world nations, such characteristics inevitably lead to an overabundance of unmanageable waste. Even with the implementation of various recycling schemes as well as the informal waste collecting movement, the issue in Newtown and greater Johannesburg still stands, due to the fact that waste management services lack the efficiency to transport collected waste to the relevant recycling and landfilling facilities. Without an efficient waste management system, various collection depots and scrap yards across the city remain under a constant state of waste overflow. This will only further tarnish the notion of waste recycling on an urban level. Therefore by reimagining the term ‘recycle’ and perceiving it in the sense of transformation, one may begin to rationalise a contemporary solution to the issue of waste in our cities. Through the study of waste on a global scale and some of the advanced technologies in an age defined by fabrication and making, this research report works to conceptualise a system in which discarded waste can be ‘transformed’ and used for the fabrication of any conceivable object. The establishment of a framework which allows direct, on-site trading of collected waste and its consequent transformation for fabrication, would aid in addressing the issue of overflowing waste yards across the city and would in turn improve the social awareness of waste management on an urban level. The incorporation of transformed waste with digital, nano and prefabrication technologies will ultimately result in the realisation of an architecture that will offer society the opportunity to re-create. A social place where waste is the vital resource and where the maker’s creativity is the limit. / XL2018

A research paper submitted to the Faculty of Science, University of the Witwatersrand, in partial fulfilment of the requirements for the degree of Master of Science November, 2016. / Informal solid waste recycling has increasingly become part of the urban landscape in many South African cities and towns. In the city of Johannesburg, for example, waste pickers are now playing an important role in waste management and recycling. There is evidence in the literature that suggests these activities have both economic and environmental benefits thereby contributing towards job creation and environmental sustainability. Despite the role that the informal sector contributes to waste management and socio-economic development, as well as environmental sustainability, the urban development and planning policy in South Africa has not embraced and integrated informal systems of municipal waste management in its policy framework. Drawing on field-based study conducted in selected parts of the City of Johannesburg, and using methods inspired by the traditional participatory research, this study explored the institutional framework within which informal solid waste management can be pursued. One solution to this problem could be the integration of the informal sector recycling into the formal waste management system. To achieve informal sector recycling integration, this study identifies barriers that hinder the integration of the informal sector into an inclusive waste management: repressive policy, lack of evidence to support activity, social acceptance, illegal migrants and lack of valid citizenship documents. It is essential to note that the integration of waste pickers should not be grounded on a ‘universal’ model but should instead take into account local context and conditions. / MT2017

A research report presented in partial fulfillment of the requirements for the degree of Master of Science in Environmental Science at the University of the Witwatersrand. Johannesburg, August 2017. / In Johannesburg, as in many cities of developing countries, municipal solid waste management poses a key challenge to local city governments. The amount of municipal solid waste generated has been noted to be growing in tandem with increasing city populations. This Masters Research Report focuses on the factors shaping participation in the separation at source (S@S) programme run by Johannesburg’s Pikitup waste management utility, with a particular focus on the role of residents’ conceptualization of waste. The research employed a qualitative comparative case study of two suburbs that were part of Pikitup’ first pilot S@S programme, which was conducted by the Waterval depot: the low income area of Newlands, and the high income area of Franklin Roosevelt Park. Twenty semi-structured interviews and one focus group interview were conducted in each of the suburbs, as well as three semistructured interviews with key informants. Findings were analyzed using thematic content analysis. The results indicate several differences between the two suburbs – including participation rates, conceptualization of waste and other factors shaping wasting practices. The research showed that conceptualization of waste is an important factor, but not the only one and affirmed other studies showing the importance of time, convenience and positive attitude towards recycling. The research found that in addition to their conceptualization of waste, the ways in which residents conceptualized recyclables affected their participation rates, and that their separation practices were aligned to their conceptualizations. In addition, the research found that residents’ conceptualization of recyclables and the recycling system played an important role in their decision to participate in Pikitup’ S@S programme. In Newlands, whilst some separated but due to their low incomes they sold it for themselves versus giving it to Pikitup, and others would not separate as they felt Pikitup should pay them or it was time consuming for them. In both suburbs those that understood the role of waste pickers chose to separate their waste for the waste pickers versus Pikitup. In conclusion, when we understand that residents participating in separating materials for different pathways, and waste pickers play an important role in separating at source when residents fail to do so then a better understanding of how much waste is being separated and diverted from landfills is obtained in addition to what motivates participation in separation. Keywords: municipal solid waste (MSW), resident households, conceptualization of waste, separation at source, wasting practices, waste picker / LG2018

One of the factors recognized as affecting the dispersion of landfill odors off-site are complex meteorological conditions. A major issue is lack of consistent means to identify the odors and their intensity. The aim of this research was to investigate the influence of meteorological parameters (temperature, humidity, pressure, wind direction, wind speed, precipitation accumulation and weather conditions) on the frequency of odor complaints from nearby neighborhoods. Methods involved collection of ten years of data on odor complaints and weather conditions to determine if there were commonalities. Sophisticated statistical analyses employed did not reveal any relationships between odor complaints and weather alone. Need for substantial improvement of detailed information is recognized. To help identify the factors that influence odor complaints- a revised odor complaint form, along with operational adjustments, were recommended. An “Odor Threat Assessment Level” is proposed to assist landfill site personnel in managing daily operations, based on weather conditions. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2017. / FAU Electronic Theses and Dissertations Collection

Thesis (MTech (Environmental Health))--Cape Peninsula University of Technology, 2007 / This study examined the medical waste management practices of Tygerberg Hospital. The researcher made use of both primary and secondaiy data. Since this was a is study, the analysis is essentially descriptive.The results of this study revealed that both general and medical wastes are generated in the hospital. Tygerberg Hospital does not quantify medical waste. Segregation of medical wastes into infectious medical waste and non-infectious medical waste is not conducted according to definite rules and standards. The hospital does not label infectious waste with Biohazard symbol. Separation of medical waste and municipal waste is however practiced to a satisfactory extent. Wheeled trolleys are used for on-site transportation of waste from the points of production (different wards) to the temporary storage area. Staff responsible for collecting medical waste use almost complete personal protective equipment. The results of this study indicated that off-site transportation of the hospital waste is undertaken by a private waste management company. Waste is transported daily and small pickups are mainly used by the waste management company for transporting the waste to an off-site area for treatment and disposal. The final disposal of the medical waste is done by the private waste management company. The main treatment method used in the final disposal of infectious waste is incineration. Non-infectious waste is disposed of using land disposal method. The hospital does not recycle medical waste materials except white office paper and mixed office paper and the use of empty containers of antiseptics for the collection and temporary storage of sharps.The hospital does not provide training for staff members on the health and environmental effects of infectious waste. The waste management company's workers have also not received any formal training with regards to medical waste management. The study showed that Tygerberg Hospital does not have a policy and plan in place for managing medical waste. There is no definite policy or plan for purchasing the necessary equipment and for providing the facilities for the correct management of medical waste in the hospital. There are also no policies and guidelines regarding the recycling of medical waste products. There are a number of problems the hospital faces in terms of medical waste management, including; lack of necessary rules, regulations and instructions on the different aspects of collection and disposal of waste, intermingling of hazardous wastes with domestic waste in the hospital sometimes, failure to quantify the waste generated in reliable records, lack of use of coloured bags by limiting the bags to only one colour for all waste, the absence of a dedicated waste manager, the supervisor in charge of general services has waste management as part of his job schedule, and there is no committee responsible for monitoring the management of medical waste. From the results of this study, it is obvious that medical waste management is not practiced according to the World Health Organisation's (WHO's) recommended standards. There are some areas where medical wastes are not properly managed. It is imperative for significant investment in the proper management of medical waste in order to reduce the health risk it poses.

Thesis (M.C.P.)--Massachusetts Institute of Technology, Dept. of Urban Studies and Planning, 1980. / MICROFICHE COPY AVAILABLE IN ARCHIVES AND ROTCH. / Bibliography: leaves 126-129. / by Stephen Andrew Hill. / M.C.P.

No description available.

Thesis (Doctor of Engineering in Chemical Engineering)--Cape Peninsula University of Technology, 2017. / The search for alternatives to fossil fuel is necessary with a view to reducing the negative environmental impact of fossil fuel and most importantly, to exploit an affordable and secured fuel source. This study investigated the viability of municipal solid waste gasification for a fuel cell system. Potential solid fuels obtained from the study in the form of refuse-derived fuel (RDF) had high heating value (HHV) between 18.17 MJ/Kg - 28.91 MJ/Kg with energy density increased from 4142.07 MJ/m3 to 10735.80 MJ/m3. The molecular formulas of RDF derived from Ladies Smith drop-off site, Woodstock drop-off site and an average molecular formula of all thirteen municipal solid waste (MSW) disposal facilities were CH1.43O1.02, CH1.49O1.19, and CH1.50O0.86 respectively. The comparative ratios of C/H were in the range of 7.11 to 8.90. The Thermo Gravimetric Analysis showed that the dehydration, thermal decompositions, char combustions were involved in the production of gaseous products but flaming pyrolysis stage was when most tar was converted to syngas mixture. The simulation of RDF gasification allowed a prediction of the RDF gasification behaviour under various operating parameters in an air-blown downdraft gasifier. Optimum SFR (steam flowrate) values for RDF1, RDF2 and RDF3 were determined to be within these values 2.80, 2.50 and 3.50 and Optimum ER values for RDF1, RDF2 and RDF3 were also determined to be within these values 0.15, 0.04 and 0.08. These conditions produced the desired high molar ratio of H2/CO yield in the syngas mixture in the product stream. The molar ratios of H2/CO yield in the syngas mixture in the product stream for all the RDFs were between 18.81 and 20.16. The values of H2/CO satisfy the requirement for fuel cell application. The highest concentration of heavy metal was observed for Al, Fe, Zn and Cr, namely 16627.77 mg/Kg at Coastal Park (CP), 17232.37 mg/Kg at Killarney (KL), 235.01 mg/Kg at Tygerdal (TG), and 564.87 mg/Kg at Kraaifontein (KF) respectively. The results of quantitative economic evaluation measurements were a net return (NR) of $0.20 million, a rate of return on investment (ROI) of 27.88 %, payback time (PBP) of 2.30 years, a net present value (NPV) of $1.11 million and a discounted cash flow rate of return (DCFROR) of 24.80 % and 28.20 % respectively. The results of the economic evaluations revealed that some findings of the economic benefits of this system would be viable if costs of handling MSW were further quantified into the costs analysis. The viability of the costs could depend on government responsibility to accept costs of handling MSW.

Thesis (MPA.) --University of Limpopo, 2006 / Refer to the document

Bibliography: leaves 70-71.